Physico-chemical, antimicrobial and antioxidant properties of gelatin-chitosan based films loaded with nanoemulsions encapsulating active compounds

Research output: Contribution to journalArticle

Standard

Harvard

APA

Vancouver

Author

Bibtex

@article{34b486ca4b35421e98c736ae4952a0b7,
title = "Physico-chemical, antimicrobial and antioxidant properties of gelatin-chitosan based films loaded with nanoemulsions encapsulating active compounds",
abstract = "The aim of this research was to develop and characterize gelatin-chitosan (4:1) based films that incorporate nanoemulsions loaded with a range of active compounds; N1: canola oil; N2: α-tocopherol/cinnamaldehyde; N3: α-tocopherol/garlic oil; or N4: a-tocopherol/cinnamaldehyde and garlic oil. Nanoemulsions were prepared in a microfluidizer with pressures ranging from 69 to 100 MPa, and 3 processing cycles. Films were produced by the casting method incorporating 5 g N1,2,3,4/100 g biopolymers and using glycerol as a plasticizer, and subsequently characterized in terms of their physico-chemical, antimicrobial and antioxidant properties. No differences (p > 0.05) were observed for all films in terms of moisture content (18% w/w), and thermal properties. The films' solubility in water and light transmission at 280 nm were considerably reduced as compared to the control, N1 (15% and 60% respectively) because of the nanoemulsion incorporation. The film loaded with N1 showed the greatest (p < 0.05) opacity, elongation at break and stiffness reduction, and was the roughest, whilst the lowest tensile strength and ability to swell were attained by films loaded with N3 and N4, respectively. DSC and X-ray analyses suggested compatibility among the biopolymeric-blend, and a good distribution of nanodroplets embedded into the matrix was confirmed by AFM and SEM analyses. Films loaded with nanoencapsulated active compounds (NAC) were very effective against Pseudomonas aeruginosa, and also showed high antioxidant activity. Overall, the present study offers clear evidence that these active-loaded films have the potential to be utilized as packaging material for enhancing food shelf life.",
keywords = "1,1-Diphenyl-2-picrylhydrazyl (PubChem CID: 2735032), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (PubChem CID: 16240279), Acetic acid (PubChem CID: 176), Active films, Alpha-tocopherol (PubChem CID: 14985), Biopolymer, Chitosan (PubChem CID: 21896651), Cinnamaldehyde, Cinnamaldehyde (PubChem CID: 637511), Emulsion, Garlic oil, Garlic oil (PubChem CID: 6850738), Glycerol (PubChem CID: 753), Span 60 (PubChem CID: 14928), Tween 20 (PubChem CID: 443314), α-tocopherol",
author = "P{\'e}rez-C{\'o}rdoba, {Luis J.} and Norton, {Ian T.} and Batchelor, {Hannah K.} and Konstantinos Gkatzionis and Fotios Spyropoulos and Sobral, {Paulo J.A.}",
year = "2017",
month = dec
day = "9",
doi = "10.1016/j.foodhyd.2017.12.012",
language = "English",
journal = "Food Hydrocolloids",
issn = "0268-005X",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Physico-chemical, antimicrobial and antioxidant properties of gelatin-chitosan based films loaded with nanoemulsions encapsulating active compounds

AU - Pérez-Córdoba, Luis J.

AU - Norton, Ian T.

AU - Batchelor, Hannah K.

AU - Gkatzionis, Konstantinos

AU - Spyropoulos, Fotios

AU - Sobral, Paulo J.A.

PY - 2017/12/9

Y1 - 2017/12/9

N2 - The aim of this research was to develop and characterize gelatin-chitosan (4:1) based films that incorporate nanoemulsions loaded with a range of active compounds; N1: canola oil; N2: α-tocopherol/cinnamaldehyde; N3: α-tocopherol/garlic oil; or N4: a-tocopherol/cinnamaldehyde and garlic oil. Nanoemulsions were prepared in a microfluidizer with pressures ranging from 69 to 100 MPa, and 3 processing cycles. Films were produced by the casting method incorporating 5 g N1,2,3,4/100 g biopolymers and using glycerol as a plasticizer, and subsequently characterized in terms of their physico-chemical, antimicrobial and antioxidant properties. No differences (p > 0.05) were observed for all films in terms of moisture content (18% w/w), and thermal properties. The films' solubility in water and light transmission at 280 nm were considerably reduced as compared to the control, N1 (15% and 60% respectively) because of the nanoemulsion incorporation. The film loaded with N1 showed the greatest (p < 0.05) opacity, elongation at break and stiffness reduction, and was the roughest, whilst the lowest tensile strength and ability to swell were attained by films loaded with N3 and N4, respectively. DSC and X-ray analyses suggested compatibility among the biopolymeric-blend, and a good distribution of nanodroplets embedded into the matrix was confirmed by AFM and SEM analyses. Films loaded with nanoencapsulated active compounds (NAC) were very effective against Pseudomonas aeruginosa, and also showed high antioxidant activity. Overall, the present study offers clear evidence that these active-loaded films have the potential to be utilized as packaging material for enhancing food shelf life.

AB - The aim of this research was to develop and characterize gelatin-chitosan (4:1) based films that incorporate nanoemulsions loaded with a range of active compounds; N1: canola oil; N2: α-tocopherol/cinnamaldehyde; N3: α-tocopherol/garlic oil; or N4: a-tocopherol/cinnamaldehyde and garlic oil. Nanoemulsions were prepared in a microfluidizer with pressures ranging from 69 to 100 MPa, and 3 processing cycles. Films were produced by the casting method incorporating 5 g N1,2,3,4/100 g biopolymers and using glycerol as a plasticizer, and subsequently characterized in terms of their physico-chemical, antimicrobial and antioxidant properties. No differences (p > 0.05) were observed for all films in terms of moisture content (18% w/w), and thermal properties. The films' solubility in water and light transmission at 280 nm were considerably reduced as compared to the control, N1 (15% and 60% respectively) because of the nanoemulsion incorporation. The film loaded with N1 showed the greatest (p < 0.05) opacity, elongation at break and stiffness reduction, and was the roughest, whilst the lowest tensile strength and ability to swell were attained by films loaded with N3 and N4, respectively. DSC and X-ray analyses suggested compatibility among the biopolymeric-blend, and a good distribution of nanodroplets embedded into the matrix was confirmed by AFM and SEM analyses. Films loaded with nanoencapsulated active compounds (NAC) were very effective against Pseudomonas aeruginosa, and also showed high antioxidant activity. Overall, the present study offers clear evidence that these active-loaded films have the potential to be utilized as packaging material for enhancing food shelf life.

KW - 1,1-Diphenyl-2-picrylhydrazyl (PubChem CID: 2735032)

KW - 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (PubChem CID: 16240279)

KW - Acetic acid (PubChem CID: 176)

KW - Active films

KW - Alpha-tocopherol (PubChem CID: 14985)

KW - Biopolymer

KW - Chitosan (PubChem CID: 21896651)

KW - Cinnamaldehyde

KW - Cinnamaldehyde (PubChem CID: 637511)

KW - Emulsion

KW - Garlic oil

KW - Garlic oil (PubChem CID: 6850738)

KW - Glycerol (PubChem CID: 753)

KW - Span 60 (PubChem CID: 14928)

KW - Tween 20 (PubChem CID: 443314)

KW - α-tocopherol

U2 - 10.1016/j.foodhyd.2017.12.012

DO - 10.1016/j.foodhyd.2017.12.012

M3 - Article

AN - SCOPUS:85039421359

JO - Food Hydrocolloids

JF - Food Hydrocolloids

SN - 0268-005X

ER -