Projects per year
- 500 - 550 out of 2,171 results
Search results
-
Industry
-
-
-
Hydrological and Hydrogeological Research on Folkestone BedsPhase 1,2,3 & 4
Rushton, K.
1/07/93 → 28/02/95
Project: Industry
-
-
Atkins Rail Contract ZSR 594 - Develop existing DC multi train simulator
Goodman, C.
BIRMINGHAM RESEARCH & DEVELOPMENT LTD
1/04/04 → 30/09/07
Project: Industry
-
High Performance Composites in Mechanical Transmissions
Walton, D.
1/09/94 → 31/12/97
Project: Industry
-
-
Adaptive Multiband Metamaterials for Structural, Air Vehicles Antennas
1/10/17 → 31/12/21
Project: Industry
-
Dynamic Characteristics of Rolling Tyres; Comparativestudy of measurement techniques.
Randle, J.
1/02/94 → 31/05/94
Project: Industry
-
CASE: A Foster: Modelling of damage evolution under complex strain paths and stress-states in hot deformation
Lin, J. & Dean, T.
1/10/03 → 30/09/06
Project: Industry
-
Systems Engineering Code of Practice for Mega Projects(Commission No 8071/8910), Job No : 507060
Allan, J.
3/08/93 → 2/08/95
Project: Industry
-
-
SMART washing machine sensor
Ward, M.
Unilever Uk Central Resources Limited
1/10/03 → 31/03/04
Project: Industry
-
Derivation of Routing Parameters for Cross-Section Survey
Knight, D.
1/12/95 → 31/12/98
Project: Industry
-
CASE (Coldwell): The Use of Lubricant Coating in High Speed & Dry Machining of Aluminium Alloys
Aspinwall, D. & Dewes, R.
1/11/99 → 31/03/04
Project: Industry
-
ORFEUS Stakeholder Questionnaire Analysis
UK WATER INDUSTRY RESEARCH LTD
1/04/07 → 30/04/07
Project: Industry
-
Research programme into assembly trial for gamma TiAl sheet fabrication - DOLSIG Assembly work
Aspinwall, D. & Dewes, R.
1/09/02 → 31/05/04
Project: Industry
-
Development of Test Rig for Cycle Products and Evaluation ofWD40
Olatunbosun, R.
1/03/96 → 31/05/96
Project: Industry
-
-
Proof of concept and feasibility study of TOGEN - A Rolling Motion Energy Capture Device for Tyre Pressure Maintenance
Olatunbosun, R.
17/05/13 → 16/01/14
Project: Industry
-
Use of small diameter end mills (<3mm) for the high speed machining of nickel based alloy sealing grooves in turbine blades.
Aspinwall, D. & Soo, L.
1/10/05 → 30/09/09
Project: Industry
-
-
-
The Machinability and Design of Components in TiNi Shape Memory Alloys (SMA)
Soo, L. & Aspinwall, D.
1/02/06 → 31/01/09
Project: Industry
-
-
-
Case Studentship - Catalytic After-Treatment of NOx Emissions Using Diesel Fuel as a Reductant
1/11/06 → 31/10/09
Project: Industry
-
Student Support - Production of Workpiece Surface Integrity After Machining Using Finite Element Analysis
Soo, L. & Aspinwall, D.
1/11/06 → 31/10/09
Project: Industry
-
Machining of Carbon Fibre reinforced Epoxides Student Support
Aspinwall, D. & Soo, L.
1/10/06 → 31/03/10
Project: Industry
-
-
Provision of Engineering Services for Radar Data Collect & Processing Support
5/07/17 → 31/12/19
Project: Industry
-
-
-
Rolls-Royce Research Fellow - Machining of advanced aerospace materials (Richard Hood)
Soo, L. & Aspinwall, D.
1/12/10 → 31/03/13
Project: Industry
-
Investigation into the performance of novel textured PCD Tools for machining CMCs
1/10/22 → 31/12/24
Project: Industry
-
Aftertreatment System for Natural Gas Fuelled Engines
Tsolakis, A. & Gough, R.
1/10/18 → 31/12/22
Project: Industry
-
Surface Identification Hardware Development
Cherniakov, M. & Gashinova, M.
1/06/14 → 30/07/17
Project: Industry
-
-
Understanding the Impact of Methane combustion in IC engine on Particulate Emissions formation and Catalysts Performance
Tsolakis, A. & Gough, R.
1/07/18 → 30/06/22
Project: Industry
-
Wade Preview, Optical Feasibility Study (WPOpt)
Gashinova, M. & Cherniakov, M.
1/06/17 → 31/05/18
Project: Industry
-
-
Bistatic Synthetic Aperture Radar with Emitters of Opportunity
SELEX SENSORS AND AIRBORNE SYSTEMS LIMITED
1/04/03 → 30/09/10
Project: Industry
-
-
-
-
Minimum Damage Wire EDM of Aerospace Alloys
Aspinwall, D. & Soo, L.
1/11/07 → 31/10/10
Project: Industry
-
Machining of Nickel Based SuperAlloys using coated PBCN Tooling
Soo, L. & Aspinwall, D.
1/10/09 → 30/11/12
Project: Industry