Mechanical Performance of Bio-Inspired Gyroid and Primitive Concrete Structures under Combined Compression and Torsion Loads: A Discrete Element Method Study

Bioinspired lightweight Primitive and Gyroid structures are two well-known TPMS (triply periodic minimal surface) cellular structures. These structures have been shown to possess high specific strength and energy absorption capacity, and thus hold great promise for a range of prefabricated civil engineering applications. As a result, concrete cellular TPMS structures have garnered the attention of researchers. However, prior to this study, no investigation has been carried out on the mechanical properties and failure patterns of concrete Primitive and Gyroid structures under coupled compressive and torsional loads. This lack of knowledge on the behaviour of these structures can lead to safety concerns in construction projects. To better understand the mechanical behaviour of Primitive and Gyroid structures under combined compression and torsion, the discrete element method (DEM) is adopted to simulate the TPMS structures. Both linear contact and nonlinear softbond contact models are utilized to simulate the brittle mechanical behaviour of concrete material. After validating the DEM parameters using published experimental data, the DEM models are subjected to coupled compressive and torsional loads to study their compressive and torsional bearing capacity and cracking patterns. The results indicate that the Primitive based structures outperform the Gyroid based structures in terms of both compressive and torsional resistance. The study finds that a compressive load enhances the ultimate torsional bearing capacity of TPMS structures, but a torsional load reduces their compressive bearing capacity. Additionally, the loading conditions have little impact on the cracking patterns of the four TPMS structures.