A spatially resolved optical method to measure thermal diffusivity

We describe an optical method to directly measure the position-dependent thermal diffusivity of reflective single crystal samples across a broad range of temperatures for condensed matter physics research. Two laser beams are used, one as a source to locally modulate the sample temperature, and the other as a probe of sample reflectivity, which is a function of the modulated temperature. Thermal diffusivity is obtained from the phase delay between source and probe signals. We combine this technique with a microscope setup in an optical cryostat, in which the sample is placed on a three-axis piezo-stage, allowing for spatially resolved measurements. Furthermore, we demonstrate experimentally and mathematically that isotropic in-plane diffusivity can be obtained when overlapping the two laser beams instead of separating them in the traditional way, which further enhances the spatial resolution to a micron scale, especially valuable when studying inhomogeneous or multidomain samples. We discuss in detail the experimental conditions under which this technique is valuable and demonstrate its performance on two stoichiometric bilayer ruthenates: Sr₃Ru₂O₇ and Ca₃Ru₂O₇. The spatial resolution allowed us to study the diffusivity in single domains of the latter, and we uncovered a temperature-dependent in-plane diffusivity anisotropy. Finally, we used the enhanced spatial resolution enabled by overlapping the two beams to measure the temperature-dependent diffusivity of Ti-doped Ca₃Ru₂O₇, which exhibits a metal-insulator transition. We observed large variations of transition temperature over the same sample, originating from doping inhomogeneity and pointing to the power of spatially resolved techniques in accessing inherent properties.