Two-way waveguide power divider using 3D printing and electroless plating

Y. Lee; S. Sim; R. Kang; I. Llamas-Garro; Y. Wang; Y. Jang; J. Kim

doi:10.23919/EuMC.2018.8541546

Two-way waveguide power divider using 3D printing and electroless plating

Y. Lee, S. Sim, R. Kang, I. Llamas-Garro, Y. Wang, Y. Jang, J. Kim

Electronic, Electrical and Systems Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

288 Downloads (Pure)

Abstract

In this paper, we report an X-band 3D printed two-way rectangular waveguide power divider made up of electroless plated non-conductive material. In contrast to conventional metal machining fabrication processes, such as computerized numerically controlled (CNC) milling and laser beam machining (LBM), it is verified that 3D printing methods can be used to fabricate rectangular waveguide power dividers with low cost and low weight in short time.

Original language	English
Title of host publication	2018 48th European Microwave Conference (EuMC)
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	219-222
Number of pages	4
ISBN (Electronic)	978-2-87487-051-4, 978-2-87487-050-7 (USB)
ISBN (Print)	978-1-5386-5285-5 (PoD)
DOIs	https://doi.org/10.23919/EuMC.2018.8541546
Publication status	Published - 22 Sept 2018

Keywords

Power dividers
Radio frequency
Three-dimensional printing
Rectangular waveguides
Power measurement
Fabrication
rectangular waveguide
3D printing
power divider
resonator
electroplating

Access to Document

10.23919/EuMC.2018.8541546Licence: None: All rights reserved

Y_Lee_et_al_Two_way_waveguide_power_divider_using_3D_printing_and_electroless_plating_EuMC_2018_2018
Checked for eligibility: 05/12/2018 Y. Lee et al., "Two-way Waveguide Power Divider using 3D Printing and Electroless Plating," 2018 48th European Microwave Conference (EuMC), Madrid, Spain, 2018, pp. 219-222. doi: 10.23919/EuMC.2018.8541546 © 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 697 KBLicence: Other (please specify with Rights Statement)

Cite this

@inproceedings{418d513c2dcc472bac80f652369786ea,

title = "Two-way waveguide power divider using 3D printing and electroless plating",

abstract = "In this paper, we report an X-band 3D printed two-way rectangular waveguide power divider made up of electroless plated non-conductive material. In contrast to conventional metal machining fabrication processes, such as computerized numerically controlled (CNC) milling and laser beam machining (LBM), it is verified that 3D printing methods can be used to fabricate rectangular waveguide power dividers with low cost and low weight in short time.",

keywords = "Power dividers, Radio frequency, Three-dimensional printing, Rectangular waveguides, Power measurement, Fabrication, rectangular waveguide, 3D printing, power divider, resonator, electroplating",

author = "Y. Lee and S. Sim and R. Kang and I. Llamas-Garro and Y. Wang and Y. Jang and J. Kim",

year = "2018",

month = sep,

day = "22",

doi = "10.23919/EuMC.2018.8541546",

language = "English",

isbn = "978-1-5386-5285-5 (PoD)",

pages = "219--222",

booktitle = "2018 48th European Microwave Conference (EuMC)",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

}

TY - GEN

T1 - Two-way waveguide power divider using 3D printing and electroless plating

AU - Lee, Y.

AU - Sim, S.

AU - Kang, R.

AU - Llamas-Garro, I.

AU - Wang, Y.

AU - Jang, Y.

AU - Kim, J.

PY - 2018/9/22

Y1 - 2018/9/22

N2 - In this paper, we report an X-band 3D printed two-way rectangular waveguide power divider made up of electroless plated non-conductive material. In contrast to conventional metal machining fabrication processes, such as computerized numerically controlled (CNC) milling and laser beam machining (LBM), it is verified that 3D printing methods can be used to fabricate rectangular waveguide power dividers with low cost and low weight in short time.

AB - In this paper, we report an X-band 3D printed two-way rectangular waveguide power divider made up of electroless plated non-conductive material. In contrast to conventional metal machining fabrication processes, such as computerized numerically controlled (CNC) milling and laser beam machining (LBM), it is verified that 3D printing methods can be used to fabricate rectangular waveguide power dividers with low cost and low weight in short time.

KW - Power dividers

KW - Radio frequency

KW - Three-dimensional printing

KW - Rectangular waveguides

KW - Power measurement

KW - Fabrication

KW - rectangular waveguide

KW - 3D printing

KW - power divider

KW - resonator

KW - electroplating

U2 - 10.23919/EuMC.2018.8541546

DO - 10.23919/EuMC.2018.8541546

M3 - Conference contribution

SN - 978-1-5386-5285-5 (PoD)

SP - 219

EP - 222

BT - 2018 48th European Microwave Conference (EuMC)

PB - Institute of Electrical and Electronics Engineers (IEEE)

ER -

Two-way waveguide power divider using 3D printing and electroless plating

Abstract

Keywords

Access to Document

Fingerprint

Cite this