The influence of flow confinement on the rheological properties of complex fluids

Research output: Contribution to journalArticlepeer-review

Colleges, School and Institutes

Abstract

The rheological properties of plastic and viscoplastic complex fluids have been investigated using constant velocity squeeze flow rheometry at small gaps in order to examine the influence of the resulting flow confinement. The fluids investigated were aqueous carbopol suspensions and three commercial products (Tesco English mustard, Tesco value lemon curd and Heinz tomato ketchup (HTK)). The bulk rheological properties were measured using parallel plate rheometry. Rough plates were used to eliminate wall slip in both rheometric configurations. The commercial products are Herschel-Bulkley fluids and, for gaps less than a critical value of similar to 200 mu m, the yield stresses tended to large values. There was a corresponding trend to small values for the flow consistencies except for HTK, which has a negligibly small bulk value. A possible explanation is that the micro-structural correlation lengths of these fluids are of the order of that of the critical separation. The yield stresses of the carbopol suspensions also increased sharply at the critical gap but then decreased gradually with decreasing gap separation. The transition may correspond to the formation of a jammed state with the subsequent plastic flow at smaller gap separations arising from localised shearing.

Details

Original languageEnglish
Pages (from-to)255-266
Number of pages12
JournalRheologica Acta
Volume49
Issue number3
Early online date12 Dec 2009
Publication statusPublished - Mar 2010

Keywords

  • Dispersions, Yield stress, Wall slip, Rheometer, Squeezing, Fluid