The effect of temperature on adhesion forces between surfaces and model foods containing whey protein and sugar

Kylee Goode, James Bowen, Noreen Akhtar, Phillip Robbins, Peter Fryer

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

The formation of fouling deposit from foods and food components is a severe problem in food processing and leads to frequent cleaning. The design of surfaces that resist fouling may decrease the need for cleaning and thus increase efficiency. Atomic force microscopy has been used to measure adhesion forces between stainless steel (SS) and fluoro-coated glass (FCG) microparticles and the model food deposits (i) whey protein (WPC), (ii) sweetened condensed milk, and (iii) caramel. Measurements were performed over a range of processing temperatures between 30 and 90 oC and at contact times up to 60 s. There is a significant increase in adhesion force of both types of microparticle to WPC at 90 oC for all contact times. For confectionary deposits adhesion to SS was similar. Adhesion of confectionary deposits to FCG at 30 oC revealed a decrease in adhesion compared to SS; at higher temperatures the adhesion forces were similar.
Original languageEnglish
Pages (from-to)371-379
JournalJournal of Food Engineering
Volume118
DOIs
Publication statusPublished - 2013

Fingerprint

Dive into the research topics of 'The effect of temperature on adhesion forces between surfaces and model foods containing whey protein and sugar'. Together they form a unique fingerprint.

Cite this