Sulphide/phosphide precipitation associated with carbon saturation in Ti-15V-3Cr-3Sn-3Al-0.2C

Research output: Contribution to journalArticle

Authors

Abstract

Titanium sulphide precipitates, Ti3S, and sulphur-enriched titanium phosphide precipitates, Ti-3(P, S), have been observed in a Ti-15V-3Cr-3Sn-3Al-0.2C alloy with sulphur less than 10 wt ppm and phosphorus of about 50 wt ppm. No such precipitates have been found in standard low C (90 ppm) Ti-153. The titanium sulphide has a formula of Ti3S and an orthorhombic structure with lattice parameters of a=1.01 nm, b=0.79nm and c=0.32nm determined using TEM diffraction analysis. The sulphur-enriched titanium phosphide has a formula of Ti-3(P, S) with a P:S ratio of about 2: 1. It has the same tetragonal structure as does the Ti3P and similar lattice parameters. Titanium sulphide precipitates have a well defined orientation relationship with the beta matrix which is (010)(Ti3S)//{130}(beta) and [001](Ti3S)// <001 >(beta). Three variants of Ti3S precipitates, perpendicular to each other, were observed and their habit planes in the beta matrix are {130}. Ti3S has a morphology of a thin layer with a thickness along [010] axis of less than 50 nm and up to 50 and 20 mu m in other two axes, respectively. The precipitation behaviour of the titanium sulphide during both continuous cooling and isothermal treatment is strongly affected by the carbon solution in the beta matrix. 2005 Elsevier B.V. All rights reserved.

Details

Original languageEnglish
Pages (from-to)77-84
Number of pages8
JournalJournal of Alloys and Compounds
Volume413
Issue number1-2
Publication statusPublished - 9 Mar 2006

Keywords

  • TEM, precipitation, transition metal alloys and compounds, crystal structure