Browse Publications

  1. Conference contribution › Research
  2. Publications content icon
    Published

    A step change in the recycling of composite materials

    Geraldine Oliveux, & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Publications content icon
    Published

    Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

    Andy Ingram & Gary Leeke, 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Publications content icon
    Published

    Cerium-Cobalt-Copper oxides based SOFC anodes for the direct utilisation of methane as fuel

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 5 Jul 2016, Proceedings of the 12th European SOFC Forum. 12 ed. Lucerne: European Fuel Cell Forum, 10 p. B1314

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Publications content icon
    Published

    Commercialising university research: Thoughts on the challenges based on experience gained in the field of ceramic processing in the UK

    Jon Binner, 21 Oct 2013, Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII. Ohji, T., Singh, M., Kirihara, S. & Widjaja, S. (eds.). 8 ed. Wiley, Vol. 34. p. 161-175 15 p. (Ceramic Engineering and Science Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Publications content icon
    Published

    Electrochemical performance and carbon resistance comparison between Sn, Cu, Ag, and Rh-doped Ni/ScCeSZ anode SOFCs operated by biogas

    Ahmad El-Kharouf & Robert Steinberger-Wilckens, 20 Oct 2020, Proceedings of the 14th European SOFC and SOE Forum. Luzern: European Fuel Cell Forum, B0509

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Publications content icon
    Published

    Evaluation of Inkjet Printed Protective Layer Coatings for SOFC Interconnects

    Maria Galvez Sanchez, Ahmad El-Kharouf & Robert Steinberger-Wilckens, 17 May 2018, Proceedings of the 13th European SOFC and SOE Forum. Bucheli, O. & Spirig, M. (eds.). Lucerne: European Fuel Cell Forum, p. 1-12 12 p. B1302

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Publications content icon
    Published

    Finite strip analysis of cracked laminate: Stress based plane strain approach

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Publications content icon
    Published

    Impact deformation of large colony Ti6Al4V

    Mingyuan Chu, Yu-Lung Chiu & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 776-779 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Publications content icon
    Published

    Microstructure and microtexture of linear friction welded Ti-6Al-4V

    Yu-Lung Chiu, Hangyue Li, Moataz Attallah, & Paul Bowen, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 3. p. 1995-1999 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Publications content icon
    Published

    Numerical and experimental study of single fiber push-out test: Influence of fiber/matrix interface mechanical properties

    Santiago Corujeira Gallo, , Hanshan Dong, & , 2019, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Publications content icon
    Published

    Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent

    Andy Ingram & Gary Leeke, 26 Aug 2017, ICCM21. International Committee on Composite Materials (ICCM), Vol. 21. 9 p. 4054

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Publications content icon
    Published

    Optimisation of solvolysis for recycling carbon fibre reinforced composites

    Geraldine Oliveux & Gary Leeke, 26 Jun 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Society for Composite Materials, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Publications content icon
    Published

    Preparation of an oriented FIB bed Ti-6Al-4V sample for in situ TEM observations of dislocation transmission through α/β interfaces

    Ian Jones, & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 791-794 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Publications content icon
    Published

    Reducing degradation effects in SOFC stacks manufactured at Forschungszentrum Jülich - Approaches and results

    Robert Steinberger-Wilckens, 22 Dec 2008, Ceramic Engineering and Science Proceedings. 4 ed. Vol. 28. p. 65-77 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Publications content icon
    Published

    Reduction of transverse shear stiffnesses of transversely cracked laminates

    Farrukh Hafeez & , 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Publications content icon
    Published

    Scaling effects in glass reinforced Epoxy filament wound tubes subjected to quasi static indentation

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Publications content icon
    Published

    Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Michael Loretto, Moataz Attallah, & , 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Publications content icon
    Published

    Study on porosity formation in the keyhole mode electron beam full-penetration welding of titanium alloys

    Jianglin Huang, , Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 1624-1628 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Publications content icon
    Published

    The determination of carbon fibre bundle sizes by electrochemical impedance spectroscopy

    Geraldine Oliveux, Joe Wood, Michael Jenkins & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Publications content icon
    Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Publications content icon
    Published

    Use of inter-fibril spaces among electrospun fibrils as ion-fixation and nano-crystallization

    Artemis Stamboulis, 2014, Advances in Bioceramics and Porous Ceramics VII: Ceramic Engineering and Science Proceedings. 5 ed. American Ceramic Society, Vol. 35. p. 33-38 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Paper › Research › Peer-reviewed
  24. Publications content icon
    Published

    A novel multi-functional sensor design for process monitoring

    Ramani Mahendran, Raj Machavaram, , , John Burns, Stephen Kukureka & Gerard Fernando, 1 Dec 2009.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  25. Publications content icon
    Published

    Effect of existing steel-to-embedded FRP shear reinforcement ratio on the behaviour of reinforced concrete T-beams

    Kagan Sogut, Samir Dirar, Marios Theofanous & Asaad Faramarzi, 2019, p. 11-16. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  26. Publications content icon
    Published

    Future directions in the recycling of composite materials

    Geraldine Oliveux, , , & Gary Leeke, 1 Jan 2015.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  27. Publications content icon
    Published

    Nonlinear finite element analysis of reinforced concrete beams strengthened in shear with embedded steel bars

    Kagan Sogut, Samir Dirar, , , Marios Theofanous & Asaad Faramarzi, 2019, p. 239-244. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  28. Publications content icon
    Published

    Numerical modelling of reinforced concrete beam-column joints shear-strengthened with embedded CFRP bars

    Samir Dirar, & Marios Theofanous, 2019, p. 245-250. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  29. Article › Research › Peer-reviewed
  30. Publications content icon
    Published

    2,7-Diazabicyclo[2.2.1]heptanes: novel asymmetric access and controlled bridge-opening

    Philip Craven, & Nigel Simpkins, 12 Mar 2019, In: Chemical Communications . 55, 29, p. 4214-4217 4 p.

    Research output: Contribution to journalArticlepeer-review

  31. Publications content icon
    Published
  32. Publications content icon
    Published

    3D printing of zirconia via digital light processing: optimization of slurry and debinding process

    Jon Binner & , Dec 2020, In: Journal of the European Ceramic Society. 40, 15, p. 5837-5844 8 p.

    Research output: Contribution to journalArticlepeer-review

  33. Publications content icon
    Published

    A bright tetranuclear iridium(III) complex

    Etienne Baranoff, 14 Mar 2011, In: Chemical Communications. 47, 10, p. 2799-2801 3 p.

    Research output: Contribution to journalArticlepeer-review

  34. Publications content icon
    Published

    A comparative study of the synthesis of nanocrystalline Yttrium Aluminium Garnet using sol-gel and co-precipitation methods

    Jon Binner, & , 1 Apr 2014, In: Ceramics International. 40, 3, p. 4179-4186

    Research output: Contribution to journalArticlepeer-review

  35. Publications content icon
    Published

    A cryogen-free HTS Josephson junction detector for terahertz imaging

    S. M. Hanham, , , , & , 1 Aug 2015, In: Superconductor Science and Technology. 28, 8, 084001.

    Research output: Contribution to journalArticlepeer-review

  36. Publications content icon
    Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  37. Publications content icon
    Published

    A new class of bioactive glasses: calcium-magnesium sulfophosphates

    Dave Bassett, , , , , , , & , Aug 2014, In: Journal of Biomedical Materials Research Part A. 102, 8, p. 2842-2848 7 p.

    Research output: Contribution to journalArticlepeer-review

  38. Publications content icon
    Published

    A novel protecting group methodology for syntheses using nitroxides

    Richard Grainger & , 14 Nov 2013, In: Chemical Communications. 49, 88, p. 10382-10384 3 p.

    Research output: Contribution to journalArticlepeer-review

  39. Publications content icon
    Published
  40. Publications content icon
    Published
  41. Publications content icon
    Published

    A synchrotron X-ray diffraction study of in situ biaxial deformation

    David Collins, , , & , 15 May 2015, In: Acta Materialia. 90, p. 46-58 13 p.

    Research output: Contribution to journalArticlepeer-review

  42. Publications content icon
    Published

    A synchrotron X-ray diffraction study of non-proportional strain-path effects

    David Collins, , , , , , & , 1 Feb 2017, In: Acta Materialia. 124, p. 290-304 15 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published
  44. Publications content icon
    Published

    Aminomaleimide fluorophores: a simple functional group with bright, solvent dependent emission

    Rachel O'Reilly, 14 Jun 2015, In: Chemical Communications . 51, 47, p. 9733-9736 4 p.

    Research output: Contribution to journalArticlepeer-review

  45. Publications content icon
    Published
  46. Publications content icon
    Published
  47. Publications content icon
    Published
  48. Publications content icon
    E-pub ahead of print
  49. Publications content icon
    Published

    Biopolymer-mediated synthesis of anisotropic piezoelectric nanorods

    Zoe Schnepp, 2 Jul 2010, In: Chemical Communications. 46, 27, p. 4887-4889 3 p.

    Research output: Contribution to journalArticlepeer-review

  50. Publications content icon
    Published

    Bullet proof

    Jon Binner, , , , , , , , , , & , 1 May 2013, In: Materials World. 21, 5, p. 26-29 4 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published
  52. Publications content icon
    Published
  53. Publications content icon
    Published

    Characterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation

    Liam Grover, 19 May 2017, In: Biomaterials Research. 21, 11 p., 7.

    Research output: Contribution to journalArticlepeer-review

  54. Publications content icon
    Published
  55. Publications content icon
    Published

    Comparison of spray freeze dried nanozirconia granules using ultrasonication and twin-fluid atomisation

    Jon Binner, & , 1 Apr 2014, In: Journal of the European Ceramic Society. 34, 4, p. 1001-1008 8 p.

    Research output: Contribution to journalArticlepeer-review

  56. Publications content icon
    Published

    Competition between densification and microstructure development during spark plasma sintering of B4C–Eu2O3

    1 Jun 2018, In: Journal of the American Ceramic Society. 101, 6, p. 2516-2526 11 p.

    Research output: Contribution to journalArticlepeer-review

  57. Publications content icon
    Published

    Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility

    Yu-Lung Chiu, , & , 1 Feb 2018, In: Acta Materialia. 144, p. 129-137 9 p.

    Research output: Contribution to journalArticlepeer-review

  58. Publications content icon
    Published
  59. Publications content icon
    Published
  60. Publications content icon
    E-pub ahead of print
  61. Publications content icon
    Published
  62. Publications content icon
    Published
  63. Publications content icon
    Published
  64. Publications content icon
    Published

    Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate

    Sandy Knowles, , & , 15 Jun 2018, In: Acta Materialia. 152, p. 301-314 14 p.

    Research output: Contribution to journalArticlepeer-review

  65. Publications content icon
    Published

    Development and tribological properties of SiC fibre reinforced CrB2 composite

    1 Oct 2017, In: Journal of the Australian Ceramic Society. 53, 2, p. 309-317 9 p.

    Research output: Contribution to journalArticlepeer-review

  66. Publications content icon
    Published
  67. Publications content icon
    Published

    Dislocation density distribution at slip band-grain boundary intersections

    David Collins, , , & , Jan 2020, In: Acta Materialia. 182, p. 172-183 12 p.

    Research output: Contribution to journalArticlepeer-review

  68. Publications content icon
    Published

    Effect of TiSi2 addition on densification of Cerium hexaboride

    1 Jan 2016, In: Ceramics International. 42, 1, p. 891-896 6 p.

    Research output: Contribution to journalArticlepeer-review

  69. Publications content icon
    Published
  70. Publications content icon
    Published

    Effect of graphene nano-platelet reinforcement on the mechanical properties of hot pressed boron carbide based composite

    1 Jun 2018, In: Ceramics International. 44, 8, p. 9830-9838 9 p.

    Research output: Contribution to journalArticlepeer-review

  71. Publications content icon
    Published
  72. Publications content icon
    Published
  73. Publications content icon
    Published
  74. Publications content icon
    Accepted/In press
  75. Publications content icon
    Published
  76. Publications content icon
    E-pub ahead of print
  77. Publications content icon
    Published

    Empirical potentials for modeling solids, surfaces, and clusters

    Roy Johnston & , 1 Jan 1999, In: Journal of Solid State Chemistry. 145, 2, p. 517-540 24 p.

    Research output: Contribution to journalArticlepeer-review

  78. Publications content icon
    Published

    Enhanced light harvesting in mesoporous TiO2/P3HT hybrid solar cells using a porphyrin dye

    Etienne Baranoff, 7 Aug 2011, In: Chemical Communications. 47, 29, p. 8244-8246 3 p.

    Research output: Contribution to journalArticlepeer-review

  79. Publications content icon
    Published

    Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy

    David Collins, , , & , 1 Mar 2017, In: Acta Materialia. 126, p. 361-371 11 p.

    Research output: Contribution to journalArticlepeer-review

  80. Publications content icon
    Published

    Erosion and mechanical properties of hydrothermally-resistant nanostructured zirconia components

    Jon Binner & , 15 Jun 2018, In: Ceramics International. 44, 9, p. 10539-10544 6 p.

    Research output: Contribution to journalArticlepeer-review

  81. Publications content icon
    Published

    Evolution of dynamic fractures in poly(methyl methacrylate)

    Stuart Hillmansen, 1 Dec 2001, In: Plastics, Rubber and Composites Processing and Applications. 30, 2, p. 88-93 6 p.

    Research output: Contribution to journalArticlepeer-review

  82. Publications content icon
    Published

    Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing

    Hany Hassanin, , Moataz Attallah, & , Jul 2017, In: Acta Materialia. 133, p. 269-281 13 p.

    Research output: Contribution to journalArticlepeer-review

  83. Publications content icon
    Published

    Experimental investigation of the scaling laws in laterally indented filament wound tubes supported with V shaped cradles

    Farrukh Hafeez & , 1 Aug 2015, In: Composite Structures. 126, p. 265-284 20 p.

    Research output: Contribution to journalArticlepeer-review

  84. Publications content icon
    Published

    Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying

    Moataz Attallah, 15 Apr 2020, In: Journal of Materials Science and Technology. 43, p. 40-43 4 p.

    Research output: Contribution to journalArticlepeer-review

  85. Publications content icon
    E-pub ahead of print

    First-principles study on ZnV2O6 and Zn2V2O7: Two new photoanode candidates for photoelectrochemical water oxidation

    Shangfeng Du & , 10 Jan 2018, (E-pub ahead of print) In: Ceramics International.

    Research output: Contribution to journalArticlepeer-review

  86. Publications content icon
    Published

    Fluid and particle dynamics in laser powder bed fusion

    Mark Ward, Moataz Attallah & , 1 Jan 2018, In: Acta Materialia. 142, p. 107-120 14 p.

    Research output: Contribution to journalArticlepeer-review

  87. Publications content icon
    E-pub ahead of print

    Formulation of Spinel based Inkjet Inks for Protective Layer Coatings in SOFC Interconnects

    Ahmad El-Kharouf & Robert Steinberger-Wilckens, 19 Jun 2020, (E-pub ahead of print) In: Journal of Colloid and Interface Science. 579, p. 82-95 JCIS-20-2524R1.

    Research output: Contribution to journalArticlepeer-review

  88. Publications content icon
    Published

    Friction and wear properties of zirconium diboride in sliding against WC ball

    1 Nov 2018, In: International Journal of Refractory Metals and Hard Materials. 76, p. 41-48 8 p.

    Research output: Contribution to journalArticlepeer-review

  89. Publications content icon
    Published

    Glass reinforced epoxy tubes subjected to indentation load: A study of scaling effects

    Farrukh Hafeez & , 1 Nov 2014, In: Composite Structures. 117, 1, p. 433-444 12 p.

    Research output: Contribution to journalArticlepeer-review

  90. Publications content icon
    Published

    Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy

    David Collins, , , , & , May 2013, In: Acta Materialia. 61, 9, p. 3378-3391 14 p.

    Research output: Contribution to journalArticlepeer-review

  91. Publications content icon
    Published

    Growth mechanism of subsurface hydrogen cavities in tungsten exposed to low-energy high-flux hydrogen plasma

    Yu-Lung Chiu, , , , , & , 31 Jul 2020, In: Acta Materialia. 193, p. 19-27 9 p.

    Research output: Contribution to journalArticlepeer-review

  92. Publications content icon
    Published

    Heat flux mapping of oxyacetylene flames and their use to characterise Cf-HfB2 composites

    Anish Paul, Jon Binner, , & , 9 Feb 2016, In: Advances in Applied Ceramics. 115, 3, p. 158-165 8 p.

    Research output: Contribution to journalArticlepeer-review

  93. Publications content icon
    E-pub ahead of print

    Heat partition in edge trimming of fiber reinforced polymer composites

    Farrukh Hafeez, 4 Feb 2020, (E-pub ahead of print) In: Journal of Composite Materials. 17 p.

    Research output: Contribution to journalArticlepeer-review

  94. Publications content icon
    Published

    High-speed synchrotron X-ray imaging of glass foaming and thermal conductivity simulation

    Biao Cai, 1 May 2020, In: Acta Materialia. 189, p. 85-92 8 p.

    Research output: Contribution to journalArticlepeer-review

  95. Publications content icon
    Published

    Highlights from Faraday Discussion: Chemistry in the urban atmosphere, United Kingdom, April 2016

    Zongbo Shi, Salim Alam & Irina Nikolova, 4 Jul 2016, In: Chemical Communications. 52, p. 9162-9172 11 p.

    Research output: Contribution to journalArticlepeer-review

  96. Publications content icon
    Published
  97. Publications content icon
    E-pub ahead of print
  98. Publications content icon
    E-pub ahead of print

    Influence of novel anode design on the performance and coke resistance towards methane directly-fed solid oxide fuel cells

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 2 Nov 2019, (E-pub ahead of print) In: Ceramics International. p. 1-35 35 p., CERI-D-19-06765.

    Research output: Contribution to journalArticlepeer-review

  99. Publications content icon
    Published

    Inorganic cements for biomedical application: Calcium phosphate, calcium sulphate and calcium silicate

    Parastoo Jamshidi & Liam Grover, 1 Feb 2015, In: Advances in Applied Ceramics. 114, 2, p. 65-76 12 p.

    Research output: Contribution to journalArticlepeer-review

  100. Publications content icon
    Published

    Laser drilling with a top-hat beam of micro-scale high aspect ratio holes in silicon nitride

    Vahid Nasrollahi, Pavel Penchev, Afif Batal, , Stefan Dimov & , 31 Jul 2020, In: Journal of Materials Processing Technology. 281, p. 1-9 9 p., 116636.

    Research output: Contribution to journalArticlepeer-review

  101. Publications content icon
    Published

    Lattice misfit during ageing of a polycrystalline nickel-base superalloy

    David Collins, , , , , & , Dec 2013, In: Acta Materialia. 61, 20, p. 7791-7804 14 p.

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published

    Light-controlled thrombin catalysis and clot formation using a photoswitchable G-quadruplex DNA aptamer

    Aysha Ali, , Benjamin Cross, Tim Dafforn, , , Anna Peacock & Jim Tucker, 16 Apr 2019, In: Chemical Communications . 55, 39, p. 5627-5630 4 p.

    Research output: Contribution to journalArticlepeer-review

  103. Publications content icon
    Published

    Localised delivery of doxorubicin to prostate cancer cells through a PSMA-targeted hyperbranched polymer theranostic

    Amanda K. Pearce, , , , , , & , Oct 2017, In: Biomaterials. 141, p. 330-339 10 p.

    Research output: Contribution to journalArticlepeer-review

  104. Publications content icon
    Published

    Lucerne/Switzerland: The 7th European solid oxide fuel cell forum

    Robert Steinberger-Wilckens, 1 Sep 2006, In: InterCeram: International Ceramic Review. 55, 5, p. 359-361 3 p.

    Research output: Contribution to journalArticlepeer-review

  105. Publications content icon
    Published

    MAS NMR study of the crystallisation process of apatite-mullite glass ceramics

    Artemis Stamboulis, , & , Apr 2004, In: Physics and Chemistry of Glasses. 45, 2, p. 127-133 7 p.

    Research output: Contribution to journalArticlepeer-review

  106. Publications content icon
    Published

    Materials characterisation and mechanical properties of Cf-UHTC powder composites

    Virtudes Rubio Diaz, Jon Binner, , , , , & , Apr 2019, In: Journal of the European Ceramic Society. 39, 4, p. 813-824

    Research output: Contribution to journalArticlepeer-review

  107. Publications content icon
    Published

    Measurements of stress fields near a grain boundary: Exploring blocked arrays of dislocations in 3D

    David Collins, , , , , , & , 1 Sep 2015, In: Acta Materialia. 96, p. 229-236 8 p.

    Research output: Contribution to journalArticlepeer-review

  108. Publications content icon
    Published

    Mechanical properties of graphene platelet-reinforced alumina ceramic composites

    Kyle Jiang, 1 Aug 2013, In: Ceramics International. 39, 6, p. 6215-6221 7 p.

    Research output: Contribution to journalArticlepeer-review

  109. Publications content icon
    Published

    Mechanistic insights into sodium storage in hard carbon anodes using local structure probes

    Phoebe Allan, , & , 22 Sep 2016, In: Chemical Communications. 52, 84, p. 12430-12433 4 p.

    Research output: Contribution to journalArticlepeer-review

  110. Publications content icon
    Published

    Microstructure, thermo-physical, mechanical and wear properties of in-situ formed boron carbide -Zirconium diboride composite

    1 Jan 2018, In: Ceramics - Silikaty. 62, 1, p. 15-30 16 p.

    Research output: Contribution to journalArticlepeer-review

  111. Publications content icon
    Published
  112. Publications content icon
    Published

    Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys

    Alessandro Mottura, Nils Warnken, Babak Raeisinia & , 15 Aug 2014, In: Acta Materialia. 75, p. 356-370 15 p.

    Research output: Contribution to journalArticlepeer-review

  113. Publications content icon
    Published

    Molecular dopant determines the structure of a physisorbed self-assembled molecular network

    Neil Champness, , & , 11 Feb 2021, In: Chemical Communications. 57, 12, p. 1454-1457 4 p.

    Research output: Contribution to journalArticlepeer-review

  114. Publications content icon
    Published

    Nanofocused synchrotron x-ray absorption studies of the intracellular redox state of an organometallic complex in cancer cells

    Isolda Romero-Canelón, & , 21 Jun 2019, In: Chemical Communications . 55, 49, p. 7065-7068 4 p.

    Research output: Contribution to journalArticlepeer-review

  115. Publications content icon
    Accepted/In press

    Nanoscale investigation of deformation characteristics in a polycrystalline silicon carbide

    1 Jan 2019, (Accepted/In press) In: Journal of the Australian Ceramic Society.

    Research output: Contribution to journalArticlepeer-review

  116. Publications content icon
    E-pub ahead of print

    Netshape centrifugal gel-casting of high-temperature sialon ceramics

    Parastoo Jamshidi, , Gang Liu, & Moataz Attallah, 21 Nov 2017, (E-pub ahead of print) In: Ceramics International.

    Research output: Contribution to journalArticlepeer-review

  117. Publications content icon
    E-pub ahead of print

    Non-crystallising glass sealants for SOFC: Effect of Y2O3 addition

    Robert Steinberger-Wilckens, 29 Oct 2019, (E-pub ahead of print) In: Ceramics International. CERI 23334.

    Research output: Contribution to journalArticlepeer-review

  118. Publications content icon
    Published
  119. Publications content icon
    Published
  120. Publications content icon
    Published

    On the microtwinning mechanism in a single crystal superalloy

    David Collins, , , , , & , 15 Aug 2017, In: Acta Materialia. 135, p. 314-329 16 p.

    Research output: Contribution to journalArticlepeer-review

  121. Publications content icon
    Published

    On the modelling of precipitation kinetics in a turbine disc nickel based superalloy

    Yu Lu, , Paul Bowen, & Hector Basoalto, 1 Jun 2020, In: Acta Materialia. 191, p. 81-100 20 p.

    Research output: Contribution to journalArticlepeer-review

  122. Publications content icon
    Published

    On the numerical treatment of the delamination problem in laminated composites under cleavage loading

    Charalampos Baniotopoulos & , 1 Jan 1995, In: Composite Structures. 30, 4, p. 453-466 14 p.

    Research output: Contribution to journalArticlepeer-review

  123. Publications content icon
    Published

    On the role of boron on improving ductility in a new polycrystalline superalloy

    David Collins, & , 1 Feb 2017, In: Acta Materialia. 124, p. 489-500 12 p.

    Research output: Contribution to journalArticlepeer-review

  124. Publications content icon
    Published

    Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site

    Dave Bassett, & , Jul 2014, In: Biomaterials. 35, 21, p. 5436-5445 10 p.

    Research output: Contribution to journalArticlepeer-review

  125. Publications content icon
    Published

    Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants

    Dave Bassett, & , Mar 2008, In: Biomaterials. 29, 7, p. 944-953 10 p.

    Research output: Contribution to journalArticlepeer-review

  126. Publications content icon
    Published

    Phase equilibria in the Fe-Mo-Ti ternary system at 1000 °C

    Sandy Knowles, , , , & , 1 Nov 2016, In: International Journal of Refractory Metals and Hard Materials. 60, p. 160-168 9 p.

    Research output: Contribution to journalArticlepeer-review

  127. Publications content icon
    Published
  128. Publications content icon
    Published

    Prediction of recrystallization in investment cast single-crystal superalloys

    Chinnapat Panwisawas, , Jean-Christophe Gebelin, , & Roger Reed, Jan 2013, In: Acta Materialia. 61, 1, p. 51-66 16 p.

    Research output: Contribution to journalArticlepeer-review

  129. Publications content icon
    Published

    Pressureless sintering of chromium diboride using spark plasma sintering facility

    1 Aug 2016, In: International Journal of Refractory Metals and Hard Materials. 58, p. 165-171 7 p.

    Research output: Contribution to journalArticlepeer-review

  130. Publications content icon
    Published

    Processing of graded anode-supported micro-tubular SOFCs based on samaria-doped ceria via gel-casting and spray-coating

    M. Elena Navarro, , & , Jul 2012, In: Ceramics International. 38, 5, p. 3713-3722 10 p.

    Research output: Contribution to journalArticlepeer-review

  131. Publications content icon
    Published

    Production of nepheline/quartz ceramics from geopolymer mortars

    Liam Grover, , & , 1 Feb 2013, In: Journal of the European Ceramic Society. 33, 2, p. 251-258 8 p.

    Research output: Contribution to journalArticlepeer-review

  132. Publications content icon
    Published
  133. Publications content icon
    Published
  134. Publications content icon
    Published
  135. Publications content icon
    Published

    Rheological characterization and shape control in gel-casting of nano-sized zirconia powders

    Gang Liu, Moataz Attallah, Yun Jiang & Tim Button, 1 Nov 2014, In: Ceramics International. 40, 9 PART A, p. 14405-14412 8 p.

    Research output: Contribution to journalArticlepeer-review

  136. Publications content icon
    Published

    Scale characterisation of an oxidised (Hf,Ti)C-SiC ultra-high temperature ceramic matrix composite

    Jon Binner, Jan 2021, In: Journal of the European Ceramic Society. 41, 1, p. 167-175 9 p.

    Research output: Contribution to journalArticlepeer-review

  137. Publications content icon
    Published

    Scattered and linked microcracks in solid oxide fuel cell electrolyte

    Robert Steinberger-Wilckens, 29 Feb 2020, In: Journal of Power Sources. 450, 11 p., 227701.

    Research output: Contribution to journalArticlepeer-review

  138. Publications content icon
    Published

    Screw Dislocation Assisted Spontaneous Growth of HfB2 Tubes and Rods

    Jon Binner & , 1 Jul 2015, In: Journal of the American Ceramic Society. 98, 7, p. 2060-2064 5 p.

    Research output: Contribution to journalArticlepeer-review

  139. Publications content icon
    Published

    Sintering and oxidation of GdB4 synthesized by B4C reduction method

    1 Mar 2017, In: Journal of the Korean Ceramic Society. 54, 2, p. 121-127 7 p.

    Research output: Contribution to journalArticlepeer-review

  140. Publications content icon
    Published

    Sol-gel synthesis and formation mechanism of ultrahigh temperature ceramic: HfB2

    Jon Binner, & , 3 Jan 2014, In: Journal of the American Ceramic Society. 97, 1, p. 92-99 8 p.

    Research output: Contribution to journalArticlepeer-review

  141. Publications content icon
    Published

    Solid oxide fuel cell development at Forschungszentrum Juelich

    Robert Steinberger-Wilckens, 1 Dec 2004, In: Ceramic Engineering and Science Proceedings. 25, 3, p. 219-227 9 p.

    Research output: Contribution to journalArticlepeer-review

  142. Publications content icon
    Published

    Stabilization of CeO2 nanoparticles in a CO2 rich solvent

    Zoe Schnepp, 17 Nov 2008, In: Chemical Communications. 43, p. 5628-5630 3 p.

    Research output: Contribution to journalArticlepeer-review

  143. Publications content icon
    Published

    Structure and magnetic properties of LiMVO4 (M = Mn, Cu)

    Colin Greaves, Nov 2020, In: Journal of Solid State Chemistry. 291, 121612.

    Research output: Contribution to journalArticlepeer-review

  144. Publications content icon
    Published

    Structure determination of a steroid directly from powder diffraction data

    Benson Kariuki, , Ken Harris, Roy Johnston, , & , 7 Sep 1999, In: Chemical Communications. 17, p. 1677-1678 2 p.

    Research output: Contribution to journalArticlepeer-review

  145. Publications content icon
    Published

    Sulfation made simple: a strategy for synthesising sulfated molecules

    Alan M Jones, 12 Mar 2019, In: Chemical Communications . 55, 30, p. 4319-4322 4 p.

    Research output: Contribution to journalArticlepeer-review

  146. Publications content icon
    Published
  147. Publications content icon
    Published

    Surface modified rice husk ceramic particles as a functional additive: Improving the tribological behaviour of aluminium matrix composites

    Karl Dearn, & , 1 May 2018, In: Carbon Letters. 26, 1, p. 51-60 10 p.

    Research output: Contribution to journalArticlepeer-review

  148. Publications content icon
    Published
  149. Publications content icon
    Published

    Synthesis and characterisation of iron substituted apatite

    Liam Grover, 1 Nov 2012, In: Advances in Applied Ceramics. 111, 8, p. 466-471 6 p.

    Research output: Contribution to journalArticlepeer-review

  150. Publications content icon
    Published

    Synthesis and in vitro degradation of a novel magnesium oxychloride cement

    Jennifer Paxton & Liam Grover, 1 Jan 2015, In: Journal of Biomedical Materials Research Part A. 103, 1, p. 194-202 9 p.

    Research output: Contribution to journalArticlepeer-review

  151. Publications content icon
    Published

    Synthesis and spark plasma sintering of sub-micron HfB2: effect of various carbon sources

    Jon Binner, & , Jun 2014, In: Journal of the European Ceramic Society. 34, 6, p. 1471-1479 9 p.

    Research output: Contribution to journalArticlepeer-review

  152. Publications content icon
    Published

    Synthesis and structures of sodium containing K2-xNaxMg2(SO4)3 langbeinite phases

    Laura Driscoll, , , & Peter Slater, 1 Aug 2019, In: Journal of Solid State Chemistry. 276, p. 37-46 10 p.

    Research output: Contribution to journalArticlepeer-review

  153. Publications content icon
    Published

    Synthesis of nanocrystalline barium titanate: Effect of microwave power on phase evolution

    Vinu Venkatachalam, & Jon Binner, Sep 2020, In: Journal of the European Ceramic Society. 40, 12, p. 3974-3983 10 p.

    Research output: Contribution to journalArticlepeer-review

  154. Publications content icon
    Published

    Synthesis of refractory metal carbide powders via microwave carbothermal reduction

    Jon Binner & , 1995, In: International Journal of Refractory Metals and Hard Materials. 13, 6, p. 353-358 6 p.

    Research output: Contribution to journalArticlepeer-review

  155. Publications content icon
    Published

    Tensile properties of polymer samples containing millimetre scale silicon microchips

    Nicole Metje, David Chapman & Stephen Kukureka, 2012, In: Polymers and Polymer Composites. 20, 6, p. 505-516 12 p.

    Research output: Contribution to journalArticlepeer-review

  156. Publications content icon
    Published

    Terahertz imaging at 77K

    S. M. Hanham, , , , & , 9 Nov 2009, In: Superconductor Science and Technology. 22, 11, 114001.

    Research output: Contribution to journalArticlepeer-review

  157. Publications content icon
    Published

    Terahertz imaging using a high-Tc superconducting Josephson junction detector

    S. M. Hanham, , & , 1 Dec 2008, In: Superconductor Science and Technology. 21, 12, 125025.

    Research output: Contribution to journalArticlepeer-review

  158. Publications content icon
    Published

    The Effect of Chemical Composition on High Temperature Behaviour of Fe and Cu Doped Mn-Co spinels

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 1 Feb 2017, In: Ceramics International. 43, 2, p. 2829-2835

    Research output: Contribution to journalArticlepeer-review

  159. Publications content icon
    Published

    The dielectric properties of some ceramic substrate materials at terahertz frequencies

    Yi Wang, Miguel Navarro-Cia, , , , , S. M. Hanham & , Nov 2019, In: Journal of the European Ceamic Society. 39, 14, p. 4424-4428 5 p.

    Research output: Contribution to journalArticlepeer-review

  160. Publications content icon
    Published
  161. Publications content icon
    Published

    The effect of temperature, heating method and state of dispersion on the vacuum filter casting of alumina suspensions

    Jon Binner & , 1 Jul 1998, In: Journal of the European Ceramic Society. 18, 7, p. 791-798 8 p.

    Research output: Contribution to journalArticlepeer-review

  162. Publications content icon
    Published

    The importance of particle size and DNA condensation salt for calcium phosphate nanoparticle transfection

    Dave Bassett, , , & , Aug 2008, In: Biomaterials. 29, 23, p. 3384-3392 9 p.

    Research output: Contribution to journalArticlepeer-review

  163. Publications content icon
    Published

    The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V

    Yu Lu, , , , Yu-Lung Chiu, , & Michael Loretto, 15 Feb 2019, In: Acta Materialia. 165, p. 520-527 8 p.

    Research output: Contribution to journalArticlepeer-review

  164. Publications content icon
    Published

    The massive transformation in Ti-Al alloys: Mechanistic observations

    Xiao-Dong Zhang, , , Martin Strangwood, , Michael Kaufman & Michael Loretto, 1 Jan 1996, In: Acta Materialia. 44, 9, p. 3723-3734 12 p.

    Research output: Contribution to journalArticlepeer-review

  165. Publications content icon
    E-pub ahead of print
  166. Publications content icon
    Published
  167. Publications content icon
    Published

    Thermal ablation performance of Cf-HfB2 composites with and without a C matrix deposited by CVI

    Virtudes Rubio Diaz, Prabhu Ramanujam, , & Jon Binner, 1 Jan 2018, In: Ceramic Transactions. 263, p. 211-221 11 p.

    Research output: Contribution to journalArticlepeer-review

  168. Publications content icon
    Published
  169. Publications content icon
    Published

    Thermally Enhanced Slip Casting of Alumina Ceramics

    Jon Binner, 1 Dec 1998, In: Ceramics International. 24, 8, p. 597-603 7 p.

    Research output: Contribution to journalArticlepeer-review

  170. Publications content icon
    Published

    Time-resolved synchrotron diffractometry of phase transformations in high strength nickel-based superalloys

    David Collins, , , & , 1 Aug 2015, In: Acta Materialia. 94, p. 244-256 13 p.

    Research output: Contribution to journalArticlepeer-review

  171. Publications content icon
    Published

    Towards large scale HTS Josephson detector arrays for THz imaging

    S. M. Hanham, & , 1 Nov 2013, In: Superconductor Science and Technology. 26, 11, 115012.

    Research output: Contribution to journalArticlepeer-review

  172. Publications content icon
    Published

    UHTC-carbon fibre composites: Preparation, oxyacetylene torch testing and characterisation

    Jon Binner, , & , Feb 2013, In: Journal of the European Ceramic Society. 33, 2, p. 423-432 10 p.

    Research output: Contribution to journalArticlepeer-review

  173. Publications content icon
    E-pub ahead of print

    Ultra-high temperature ceramic composite

    Virtudes Rubio Diaz, Prabhu Ramanujam & Jon Binner, 19 Nov 2018, (E-pub ahead of print) In: Advances in Applied Ceramics. 117, sup1, p. s56-s61 6 p.

    Research output: Contribution to journalArticlepeer-review

  174. Publications content icon
    Published

    Ultra-high temperature deformation in a single crystal superalloy: Mesoscale process simulation and micromechanisms

    David Collins, 15 Jan 2021, In: Acta Materialia. 203, 116468.

    Research output: Contribution to journalArticlepeer-review

  175. Publications content icon
    Published

    Ultra-low temperature reactive spark plasma sintering of ZrB2-hBN ceramics

    Ji Zou, , & Jon Binner, Nov 2016, In: Journal of the European Ceramic Society. 36, 15, p. 3637-3645

    Research output: Contribution to journalArticlepeer-review

  176. Publications content icon
    Published
  177. Publications content icon
    Published
  178. Publications content icon
    Published

    Use of electrophoretic impregnation and vacuum bagging to impregnate SiC powder into SiC fiber preforms

    Jon Binner, , & , 19 Jul 2013, In: International Journal of Applied Ceramic Technology. 12, 1, p. 212-222 11 p.

    Research output: Contribution to journalArticlepeer-review

  179. Publications content icon
    Published
  180. Publications content icon
    Published

    White-light phosphorescence emission from a single molecule: Application to OLED

    Etienne Baranoff, 10 Aug 2009, In: Chemical Communications. 31, p. 4672-4674 3 p.

    Research output: Contribution to journalArticlepeer-review

  181. Publications content icon
    Published

    Worldwide SOFC technology overview and benchmark

    Robert Steinberger-Wilckens, 1 Dec 2005, In: Ceramic Engineering and Science Proceedings. 26, 4, p. 3-14 12 p.

    Research output: Contribution to journalArticlepeer-review

  182. Publications content icon
    Published
  183. Publications content icon
    Published

    ZrB2 based novel composite with NiAl as reinforcement phase

    1 Jan 2018, In: International Journal of Refractory Metals and Hard Materials. 70, p. 56-65 10 p.

    Research output: Contribution to journalArticlepeer-review

  184. Comment/debate › Research › Peer-reviewed
  185. Publications content icon
    Published
  186. Editorial › Research › Peer-reviewed
  187. Publications content icon
    Published

    Editorial

    Jon Binner, 17 Oct 2018, In: Advances in Applied Ceramics. 117, sup1, p. s1

    Research output: Contribution to journalEditorialpeer-review

  188. Conference article › Research › Peer-reviewed
  189. Publications content icon
    Published

    Nickel-free SOFC anode for ethanol electrocatalysis

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 8 Sep 2019, In: ECS Transactions. 91, 1, p. 1673-1682 10 p.

    Research output: Contribution to journalConference articlepeer-review

  190. Publications content icon
    E-pub ahead of print

    Properties of 10Sc1CeSZ-3.5YSZ(33-, 40-, 50-wt.%) composite ceramics for SOFC application

    Nikkia McDonald, , , , , , , & Robert Steinberger-Wilckens, 6 Mar 2019, (E-pub ahead of print) In: Materials Today: Proceedings. 6, 2, p. 26-35 10 p.

    Research output: Contribution to journalConference articlepeer-review