Browse Publications

  1. Conference contribution › Research
  2. Publications content icon
    Published

    A step change in the recycling of composite materials

    Geraldine Oliveux, & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Publications content icon
    Published

    Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

    Andy Ingram & Gary Leeke, 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Publications content icon
    Published

    Cerium-Cobalt-Copper oxides based SOFC anodes for the direct utilisation of methane as fuel

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 5 Jul 2016, Proceedings of the 12th European SOFC Forum. 12 ed. Lucerne: European Fuel Cell Forum, 10 p. B1314

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Publications content icon
    Published

    Commercialising university research: Thoughts on the challenges based on experience gained in the field of ceramic processing in the UK

    Jon Binner, 21 Oct 2013, Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII. Ohji, T., Singh, M., Kirihara, S. & Widjaja, S. (eds.). 8 ed. Wiley, Vol. 34. p. 161-175 15 p. (Ceramic Engineering and Science Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Publications content icon
    Published

    Electrochemical performance and carbon resistance comparison between Sn, Cu, Ag, and Rh-doped Ni/ScCeSZ anode SOFCs operated by biogas

    Ahmad El-Kharouf & Robert Steinberger-Wilckens, 20 Oct 2020, Proceedings of the 14th European SOFC and SOE Forum. Luzern: European Fuel Cell Forum, B0509

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Publications content icon
    Published

    Evaluation of Inkjet Printed Protective Layer Coatings for SOFC Interconnects

    Maria Galvez Sanchez, Ahmad El-Kharouf & Robert Steinberger-Wilckens, 17 May 2018, Proceedings of the 13th European SOFC and SOE Forum. Bucheli, O. & Spirig, M. (eds.). Lucerne: European Fuel Cell Forum, p. 1-12 12 p. B1302

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Publications content icon
    Published

    Finite strip analysis of cracked laminate: Stress based plane strain approach

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Publications content icon
    Published

    Impact deformation of large colony Ti6Al4V

    Mingyuan Chu, Yu-Lung Chiu & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 776-779 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Publications content icon
    Published

    Microstructure and microtexture of linear friction welded Ti-6Al-4V

    Yu-Lung Chiu, Hangyue Li, Moataz Attallah, & Paul Bowen, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 3. p. 1995-1999 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Publications content icon
    Published

    Numerical and experimental study of single fiber push-out test: Influence of fiber/matrix interface mechanical properties

    Santiago Corujeira Gallo, , Hanshan Dong, & , 2019, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Publications content icon
    Published

    Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent

    Andy Ingram & Gary Leeke, 26 Aug 2017, ICCM21. International Committee on Composite Materials (ICCM), Vol. 21. 9 p. 4054

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Publications content icon
    Published

    Optimisation of solvolysis for recycling carbon fibre reinforced composites

    Geraldine Oliveux & Gary Leeke, 26 Jun 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Society for Composite Materials, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Publications content icon
    Published

    Preparation of an oriented FIB bed Ti-6Al-4V sample for in situ TEM observations of dislocation transmission through α/β interfaces

    Ian Jones, & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 791-794 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Publications content icon
    Published

    Reducing degradation effects in SOFC stacks manufactured at Forschungszentrum Jülich - Approaches and results

    Robert Steinberger-Wilckens, 22 Dec 2008, Ceramic Engineering and Science Proceedings. 4 ed. Vol. 28. p. 65-77 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Publications content icon
    Published

    Reduction of transverse shear stiffnesses of transversely cracked laminates

    Farrukh Hafeez & , 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Publications content icon
    Published

    Scaling effects in glass reinforced Epoxy filament wound tubes subjected to quasi static indentation

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Publications content icon
    Published

    Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Michael Loretto, Moataz Attallah, & , 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Publications content icon
    Published

    Study on porosity formation in the keyhole mode electron beam full-penetration welding of titanium alloys

    Jianglin Huang, , Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 1624-1628 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Publications content icon
    Published

    The determination of carbon fibre bundle sizes by electrochemical impedance spectroscopy

    Geraldine Oliveux, Joe Wood, Michael Jenkins & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Publications content icon
    Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Publications content icon
    Published

    Use of inter-fibril spaces among electrospun fibrils as ion-fixation and nano-crystallization

    Artemis Stamboulis, 2014, Advances in Bioceramics and Porous Ceramics VII: Ceramic Engineering and Science Proceedings. 5 ed. American Ceramic Society, Vol. 35. p. 33-38 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Paper › Research › Peer-reviewed
  24. Publications content icon
    Published

    A novel multi-functional sensor design for process monitoring

    Ramani Mahendran, Raj Machavaram, , , John Burns, Stephen Kukureka & Gerard Fernando, 1 Dec 2009.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  25. Publications content icon
    Published

    Effect of existing steel-to-embedded FRP shear reinforcement ratio on the behaviour of reinforced concrete T-beams

    Kagan Sogut, Samir Dirar, Marios Theofanous & Asaad Faramarzi, 2019, p. 11-16. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  26. Publications content icon
    Published

    Future directions in the recycling of composite materials

    Geraldine Oliveux, , , & Gary Leeke, 1 Jan 2015.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  27. Publications content icon
    Published

    Nonlinear finite element analysis of reinforced concrete beams strengthened in shear with embedded steel bars

    Kagan Sogut, Samir Dirar, , , Marios Theofanous & Asaad Faramarzi, 2019, p. 239-244. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  28. Publications content icon
    Published

    Numerical modelling of reinforced concrete beam-column joints shear-strengthened with embedded CFRP bars

    Samir Dirar, & Marios Theofanous, 2019, p. 245-250. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  29. Article › Research › Peer-reviewed
  30. Publications content icon
    Published

    2,7-Diazabicyclo[2.2.1]heptanes: novel asymmetric access and controlled bridge-opening

    Philip Craven, & Nigel Simpkins, 12 Mar 2019, In: Chemical Communications . 55, 29, p. 4214-4217 4 p.

    Research output: Contribution to journalArticlepeer-review

  31. Publications content icon
    Published
  32. Publications content icon
    Published

    3D printing of zirconia via digital light processing: optimization of slurry and debinding process

    Jon Binner & , Dec 2020, In: Journal of the European Ceramic Society. 40, 15, p. 5837-5844 8 p.

    Research output: Contribution to journalArticlepeer-review

  33. Publications content icon
    Published

    A bright tetranuclear iridium(III) complex

    Etienne Baranoff, 14 Mar 2011, In: Chemical Communications. 47, 10, p. 2799-2801 3 p.

    Research output: Contribution to journalArticlepeer-review

  34. Publications content icon
    Published

    A comparative study of the synthesis of nanocrystalline Yttrium Aluminium Garnet using sol-gel and co-precipitation methods

    Jon Binner, & , 1 Apr 2014, In: Ceramics International. 40, 3, p. 4179-4186

    Research output: Contribution to journalArticlepeer-review

  35. Publications content icon
    Published

    A cryogen-free HTS Josephson junction detector for terahertz imaging

    S. M. Hanham, , , , & , 1 Aug 2015, In: Superconductor Science and Technology. 28, 8, 084001.

    Research output: Contribution to journalArticlepeer-review

  36. Publications content icon
    Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  37. Publications content icon
    Published

    A new class of bioactive glasses: calcium-magnesium sulfophosphates

    Dave Bassett, , , , , , , & , Aug 2014, In: Journal of Biomedical Materials Research Part A. 102, 8, p. 2842-2848 7 p.

    Research output: Contribution to journalArticlepeer-review

  38. Publications content icon
    Published

    A novel protecting group methodology for syntheses using nitroxides

    Richard Grainger & , 14 Nov 2013, In: Chemical Communications. 49, 88, p. 10382-10384 3 p.

    Research output: Contribution to journalArticlepeer-review

  39. Publications content icon
    Published
  40. Publications content icon
    Published
  41. Publications content icon
    Published

    A synchrotron X-ray diffraction study of in situ biaxial deformation

    David Collins, , , & , 15 May 2015, In: Acta Materialia. 90, p. 46-58 13 p.

    Research output: Contribution to journalArticlepeer-review

  42. Publications content icon
    Published

    A synchrotron X-ray diffraction study of non-proportional strain-path effects

    David Collins, , , , , , & , 1 Feb 2017, In: Acta Materialia. 124, p. 290-304 15 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published
  44. Publications content icon
    Published

    Aminomaleimide fluorophores: a simple functional group with bright, solvent dependent emission

    Rachel O'Reilly, 14 Jun 2015, In: Chemical Communications . 51, 47, p. 9733-9736 4 p.

    Research output: Contribution to journalArticlepeer-review

  45. Publications content icon
    Published
  46. Publications content icon
    Published
  47. Publications content icon
    Published
  48. Publications content icon
    E-pub ahead of print
  49. Publications content icon
    Published

    Biopolymer-mediated synthesis of anisotropic piezoelectric nanorods

    Zoe Schnepp, 2 Jul 2010, In: Chemical Communications. 46, 27, p. 4887-4889 3 p.

    Research output: Contribution to journalArticlepeer-review

  50. Publications content icon
    Published

    Bullet proof

    Jon Binner, , , , , , , , , , & , 1 May 2013, In: Materials World. 21, 5, p. 26-29 4 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published
  52. Publications content icon
    Published
  53. Publications content icon
    Published

    Characterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation

    Liam Grover, 19 May 2017, In: Biomaterials Research. 21, 11 p., 7.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 4 Next