Browse Publications

  1. 2016
  2. Publications content icon
    Published
  3. Publications content icon
    Published

    Heat flux mapping of oxyacetylene flames and their use to characterise Cf-HfB2 composites

    Anish Paul, Jon Binner, , & , 9 Feb 2016, In: Advances in Applied Ceramics. 115, 3, p. 158-165 8 p.

    Research output: Contribution to journalArticlepeer-review

  4. Publications content icon
    Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Publications content icon
    Published

    Effect of TiSi2 addition on densification of Cerium hexaboride

    1 Jan 2016, In: Ceramics International. 42, 1, p. 891-896 6 p.

    Research output: Contribution to journalArticlepeer-review

  6. Publications content icon
    Published
  7. 2015
  8. Publications content icon
    Published

    Measurements of stress fields near a grain boundary: Exploring blocked arrays of dislocations in 3D

    David Collins, , , , , , & , 1 Sep 2015, In: Acta Materialia. 96, p. 229-236 8 p.

    Research output: Contribution to journalArticlepeer-review

  9. Publications content icon
    Published

    A cryogen-free HTS Josephson junction detector for terahertz imaging

    S. M. Hanham, , , , & , 1 Aug 2015, In: Superconductor Science and Technology. 28, 8, 084001.

    Research output: Contribution to journalArticlepeer-review

  10. Publications content icon
    Published

    Experimental investigation of the scaling laws in laterally indented filament wound tubes supported with V shaped cradles

    Farrukh Hafeez & , 1 Aug 2015, In: Composite Structures. 126, p. 265-284 20 p.

    Research output: Contribution to journalArticlepeer-review

  11. Publications content icon
    Published

    Time-resolved synchrotron diffractometry of phase transformations in high strength nickel-based superalloys

    David Collins, , , & , 1 Aug 2015, In: Acta Materialia. 94, p. 244-256 13 p.

    Research output: Contribution to journalArticlepeer-review

  12. Publications content icon
    Published

    Screw Dislocation Assisted Spontaneous Growth of HfB2 Tubes and Rods

    Jon Binner & , 1 Jul 2015, In: Journal of the American Ceramic Society. 98, 7, p. 2060-2064 5 p.

    Research output: Contribution to journalArticlepeer-review

  13. Publications content icon
    Published

    Aminomaleimide fluorophores: a simple functional group with bright, solvent dependent emission

    Rachel O'Reilly, 14 Jun 2015, In: Chemical Communications . 51, 47, p. 9733-9736 4 p.

    Research output: Contribution to journalArticlepeer-review

  14. Publications content icon
    Published

    A synchrotron X-ray diffraction study of in situ biaxial deformation

    David Collins, , , & , 15 May 2015, In: Acta Materialia. 90, p. 46-58 13 p.

    Research output: Contribution to journalArticlepeer-review

  15. Publications content icon
    Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  16. Publications content icon
    Published

    Inorganic cements for biomedical application: Calcium phosphate, calcium sulphate and calcium silicate

    Parastoo Jamshidi & Liam Grover, 1 Feb 2015, In: Advances in Applied Ceramics. 114, 2, p. 65-76 12 p.

    Research output: Contribution to journalArticlepeer-review

  17. Publications content icon
    Published

    Future directions in the recycling of composite materials

    Geraldine Oliveux, , , & Gary Leeke, 1 Jan 2015.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  18. Publications content icon
    Published

    Synthesis and in vitro degradation of a novel magnesium oxychloride cement

    Jennifer Paxton & Liam Grover, 1 Jan 2015, In: Journal of Biomedical Materials Research Part A. 103, 1, p. 194-202 9 p.

    Research output: Contribution to journalArticlepeer-review

  19. Publications content icon
    Published
  20. Publications content icon
    Published

    Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Michael Loretto, Moataz Attallah, & , 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. 2014
  22. Publications content icon
    Published

    Glass reinforced epoxy tubes subjected to indentation load: A study of scaling effects

    Farrukh Hafeez & , 1 Nov 2014, In: Composite Structures. 117, 1, p. 433-444 12 p.

    Research output: Contribution to journalArticlepeer-review

  23. Publications content icon
    Published

    Rheological characterization and shape control in gel-casting of nano-sized zirconia powders

    Gang Liu, Moataz Attallah, Yun Jiang & Tim Button, 1 Nov 2014, In: Ceramics International. 40, 9 PART A, p. 14405-14412 8 p.

    Research output: Contribution to journalArticlepeer-review

  24. Publications content icon
    Published
  25. Publications content icon
    Published

    Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys

    Alessandro Mottura, Nils Warnken, Babak Raeisinia & , 15 Aug 2014, In: Acta Materialia. 75, p. 356-370 15 p.

    Research output: Contribution to journalArticlepeer-review

  26. Publications content icon
    Published

    A new class of bioactive glasses: calcium-magnesium sulfophosphates

    Dave Bassett, , , , , , , & , Aug 2014, In: Journal of Biomedical Materials Research Part A. 102, 8, p. 2842-2848 7 p.

    Research output: Contribution to journalArticlepeer-review

  27. Publications content icon
    Published

    Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site

    Dave Bassett, & , Jul 2014, In: Biomaterials. 35, 21, p. 5436-5445 10 p.

    Research output: Contribution to journalArticlepeer-review

  28. Publications content icon
    Published

    Synthesis and spark plasma sintering of sub-micron HfB2: effect of various carbon sources

    Jon Binner, & , Jun 2014, In: Journal of the European Ceramic Society. 34, 6, p. 1471-1479 9 p.

    Research output: Contribution to journalArticlepeer-review

  29. Publications content icon
    Published
  30. Publications content icon
    Published
  31. Publications content icon
    Published

    A comparative study of the synthesis of nanocrystalline Yttrium Aluminium Garnet using sol-gel and co-precipitation methods

    Jon Binner, & , 1 Apr 2014, In: Ceramics International. 40, 3, p. 4179-4186

    Research output: Contribution to journalArticlepeer-review

  32. Publications content icon
    Published

    Comparison of spray freeze dried nanozirconia granules using ultrasonication and twin-fluid atomisation

    Jon Binner, & , 1 Apr 2014, In: Journal of the European Ceramic Society. 34, 4, p. 1001-1008 8 p.

    Research output: Contribution to journalArticlepeer-review

  33. Publications content icon
    Published
  34. Publications content icon
    Published
  35. Publications content icon
    Published

    Sol-gel synthesis and formation mechanism of ultrahigh temperature ceramic: HfB2

    Jon Binner, & , 3 Jan 2014, In: Journal of the American Ceramic Society. 97, 1, p. 92-99 8 p.

    Research output: Contribution to journalArticlepeer-review

  36. Publications content icon
    Published

    A step change in the recycling of composite materials

    Geraldine Oliveux, & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Publications content icon
    Published

    Finite strip analysis of cracked laminate: Stress based plane strain approach

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Publications content icon
    Published

    Scaling effects in glass reinforced Epoxy filament wound tubes subjected to quasi static indentation

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Publications content icon
    Published

    The determination of carbon fibre bundle sizes by electrochemical impedance spectroscopy

    Geraldine Oliveux, Joe Wood, Michael Jenkins & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Publications content icon
    Published

    Use of inter-fibril spaces among electrospun fibrils as ion-fixation and nano-crystallization

    Artemis Stamboulis, 2014, Advances in Bioceramics and Porous Ceramics VII: Ceramic Engineering and Science Proceedings. 5 ed. American Ceramic Society, Vol. 35. p. 33-38 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. 2013
  42. Publications content icon
    Published

    Lattice misfit during ageing of a polycrystalline nickel-base superalloy

    David Collins, , , , , & , Dec 2013, In: Acta Materialia. 61, 20, p. 7791-7804 14 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published

    A novel protecting group methodology for syntheses using nitroxides

    Richard Grainger & , 14 Nov 2013, In: Chemical Communications. 49, 88, p. 10382-10384 3 p.

    Research output: Contribution to journalArticlepeer-review

  44. Publications content icon
    Published

    Towards large scale HTS Josephson detector arrays for THz imaging

    S. M. Hanham, & , 1 Nov 2013, In: Superconductor Science and Technology. 26, 11, 115012.

    Research output: Contribution to journalArticlepeer-review

  45. Publications content icon
    Published

    Commercialising university research: Thoughts on the challenges based on experience gained in the field of ceramic processing in the UK

    Jon Binner, 21 Oct 2013, Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII. Ohji, T., Singh, M., Kirihara, S. & Widjaja, S. (eds.). 8 ed. Wiley, Vol. 34. p. 161-175 15 p. (Ceramic Engineering and Science Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Publications content icon
    Published

    Mechanical properties of graphene platelet-reinforced alumina ceramic composites

    Kyle Jiang, 1 Aug 2013, In: Ceramics International. 39, 6, p. 6215-6221 7 p.

    Research output: Contribution to journalArticlepeer-review

  47. Publications content icon
    Published

    Use of electrophoretic impregnation and vacuum bagging to impregnate SiC powder into SiC fiber preforms

    Jon Binner, , & , 19 Jul 2013, In: International Journal of Applied Ceramic Technology. 12, 1, p. 212-222 11 p.

    Research output: Contribution to journalArticlepeer-review

  48. Publications content icon
    Published
  49. Publications content icon
    Published

    Bullet proof

    Jon Binner, , , , , , , , , , & , 1 May 2013, In: Materials World. 21, 5, p. 26-29 4 p.

    Research output: Contribution to journalArticlepeer-review

  50. Publications content icon
    Published

    Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy

    David Collins, , , , & , May 2013, In: Acta Materialia. 61, 9, p. 3378-3391 14 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published

    Production of nepheline/quartz ceramics from geopolymer mortars

    Liam Grover, , & , 1 Feb 2013, In: Journal of the European Ceramic Society. 33, 2, p. 251-258 8 p.

    Research output: Contribution to journalArticlepeer-review

  52. Publications content icon
    Published

    UHTC-carbon fibre composites: Preparation, oxyacetylene torch testing and characterisation

    Jon Binner, , & , Feb 2013, In: Journal of the European Ceramic Society. 33, 2, p. 423-432 10 p.

    Research output: Contribution to journalArticlepeer-review

  53. Publications content icon
    Published

    Prediction of recrystallization in investment cast single-crystal superalloys

    Chinnapat Panwisawas, , Jean-Christophe Gebelin, , & Roger Reed, Jan 2013, In: Acta Materialia. 61, 1, p. 51-66 16 p.

    Research output: Contribution to journalArticlepeer-review

  54. Publications content icon
    Published
  55. 2012
  56. Publications content icon
    Published

    Impact deformation of large colony Ti6Al4V

    Mingyuan Chu, Yu-Lung Chiu & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 776-779 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Publications content icon
    Published

    Microstructure and microtexture of linear friction welded Ti-6Al-4V

    Yu-Lung Chiu, Hangyue Li, Moataz Attallah, & Paul Bowen, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 3. p. 1995-1999 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Publications content icon
    Published

    Preparation of an oriented FIB bed Ti-6Al-4V sample for in situ TEM observations of dislocation transmission through α/β interfaces

    Ian Jones, & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 791-794 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Publications content icon
    Published

    Study on porosity formation in the keyhole mode electron beam full-penetration welding of titanium alloys

    Jianglin Huang, , Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 1624-1628 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Publications content icon
    Published

    Synthesis and characterisation of iron substituted apatite

    Liam Grover, 1 Nov 2012, In: Advances in Applied Ceramics. 111, 8, p. 466-471 6 p.

    Research output: Contribution to journalArticlepeer-review

  61. Publications content icon
    Published
  62. Publications content icon
    Published

    Processing of graded anode-supported micro-tubular SOFCs based on samaria-doped ceria via gel-casting and spray-coating

    M. Elena Navarro, , & , Jul 2012, In: Ceramics International. 38, 5, p. 3713-3722 10 p.

    Research output: Contribution to journalArticlepeer-review

  63. Publications content icon
    Published

    Tensile properties of polymer samples containing millimetre scale silicon microchips

    Nicole Metje, David Chapman & Stephen Kukureka, 2012, In: Polymers and Polymer Composites. 20, 6, p. 505-516 12 p.

    Research output: Contribution to journalArticlepeer-review

  64. 2011
  65. Publications content icon
    Published

    Enhanced light harvesting in mesoporous TiO2/P3HT hybrid solar cells using a porphyrin dye

    Etienne Baranoff, 7 Aug 2011, In: Chemical Communications. 47, 29, p. 8244-8246 3 p.

    Research output: Contribution to journalArticlepeer-review

  66. Publications content icon
    Published

    A bright tetranuclear iridium(III) complex

    Etienne Baranoff, 14 Mar 2011, In: Chemical Communications. 47, 10, p. 2799-2801 3 p.

    Research output: Contribution to journalArticlepeer-review

  67. 2010
  68. Publications content icon
    Published

    Biopolymer-mediated synthesis of anisotropic piezoelectric nanorods

    Zoe Schnepp, 2 Jul 2010, In: Chemical Communications. 46, 27, p. 4887-4889 3 p.

    Research output: Contribution to journalArticlepeer-review

  69. 2009
  70. Publications content icon
    Published

    A novel multi-functional sensor design for process monitoring

    Ramani Mahendran, Raj Machavaram, , , John Burns, Stephen Kukureka & Gerard Fernando, 1 Dec 2009.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  71. Publications content icon
    Published

    Terahertz imaging at 77K

    S. M. Hanham, , , , & , 9 Nov 2009, In: Superconductor Science and Technology. 22, 11, 114001.

    Research output: Contribution to journalArticlepeer-review

  72. Publications content icon
    Published

    White-light phosphorescence emission from a single molecule: Application to OLED

    Etienne Baranoff, 10 Aug 2009, In: Chemical Communications. 31, p. 4672-4674 3 p.

    Research output: Contribution to journalArticlepeer-review

  73. 2008
  74. Publications content icon
    Published

    Reducing degradation effects in SOFC stacks manufactured at Forschungszentrum Jülich - Approaches and results

    Robert Steinberger-Wilckens, 22 Dec 2008, Ceramic Engineering and Science Proceedings. 4 ed. Vol. 28. p. 65-77 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Publications content icon
    Published

    Terahertz imaging using a high-Tc superconducting Josephson junction detector

    S. M. Hanham, , & , 1 Dec 2008, In: Superconductor Science and Technology. 21, 12, 125025.

    Research output: Contribution to journalArticlepeer-review

  76. Publications content icon
    Published

    Stabilization of CeO2 nanoparticles in a CO2 rich solvent

    Zoe Schnepp, 17 Nov 2008, In: Chemical Communications. 43, p. 5628-5630 3 p.

    Research output: Contribution to journalArticlepeer-review

  77. Publications content icon
    Published

    The importance of particle size and DNA condensation salt for calcium phosphate nanoparticle transfection

    Dave Bassett, , , & , Aug 2008, In: Biomaterials. 29, 23, p. 3384-3392 9 p.

    Research output: Contribution to journalArticlepeer-review

  78. Publications content icon
    Published

    Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants

    Dave Bassett, & , Mar 2008, In: Biomaterials. 29, 7, p. 944-953 10 p.

    Research output: Contribution to journalArticlepeer-review

  79. 2007
  80. Publications content icon
    Published

    Reduction of transverse shear stiffnesses of transversely cracked laminates

    Farrukh Hafeez & , 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. 2006
  82. Publications content icon
    Published

    Lucerne/Switzerland: The 7th European solid oxide fuel cell forum

    Robert Steinberger-Wilckens, 1 Sep 2006, In: InterCeram: International Ceramic Review. 55, 5, p. 359-361 3 p.

    Research output: Contribution to journalArticlepeer-review

  83. 2005
  84. Publications content icon
    Published
  85. Publications content icon
    Published

    Worldwide SOFC technology overview and benchmark

    Robert Steinberger-Wilckens, 1 Dec 2005, In: Ceramic Engineering and Science Proceedings. 26, 4, p. 3-14 12 p.

    Research output: Contribution to journalArticlepeer-review

  86. 2004
  87. Publications content icon
    Published

    Solid oxide fuel cell development at Forschungszentrum Juelich

    Robert Steinberger-Wilckens, 1 Dec 2004, In: Ceramic Engineering and Science Proceedings. 25, 3, p. 219-227 9 p.

    Research output: Contribution to journalArticlepeer-review

  88. Publications content icon
    Published

    MAS NMR study of the crystallisation process of apatite-mullite glass ceramics

    Artemis Stamboulis, , & , Apr 2004, In: Physics and Chemistry of Glasses. 45, 2, p. 127-133 7 p.

    Research output: Contribution to journalArticlepeer-review

  89. 2001
  90. Publications content icon
    Published

    Evolution of dynamic fractures in poly(methyl methacrylate)

    Stuart Hillmansen, 1 Dec 2001, In: Plastics, Rubber and Composites Processing and Applications. 30, 2, p. 88-93 6 p.

    Research output: Contribution to journalArticlepeer-review

  91. 1999
  92. Publications content icon
    Published

    Structure determination of a steroid directly from powder diffraction data

    Benson Kariuki, , Ken Harris, Roy Johnston, , & , 7 Sep 1999, In: Chemical Communications. 17, p. 1677-1678 2 p.

    Research output: Contribution to journalArticlepeer-review

  93. Publications content icon
    Published

    Empirical potentials for modeling solids, surfaces, and clusters

    Roy Johnston & , 1 Jan 1999, In: Journal of Solid State Chemistry. 145, 2, p. 517-540 24 p.

    Research output: Contribution to journalArticlepeer-review

  94. 1998
  95. Publications content icon
    Published

    Thermally Enhanced Slip Casting of Alumina Ceramics

    Jon Binner, 1 Dec 1998, In: Ceramics International. 24, 8, p. 597-603 7 p.

    Research output: Contribution to journalArticlepeer-review

  96. Publications content icon
    Published

    The effect of temperature, heating method and state of dispersion on the vacuum filter casting of alumina suspensions

    Jon Binner & , 1 Jul 1998, In: Journal of the European Ceramic Society. 18, 7, p. 791-798 8 p.

    Research output: Contribution to journalArticlepeer-review

  97. Publications content icon
    Published
  98. 1996
  99. Publications content icon
    Published

    The massive transformation in Ti-Al alloys: Mechanistic observations

    Xiao-Dong Zhang, , , Martin Strangwood, , Michael Kaufman & Michael Loretto, 1 Jan 1996, In: Acta Materialia. 44, 9, p. 3723-3734 12 p.

    Research output: Contribution to journalArticlepeer-review

  100. 1995
  101. Publications content icon
    Published

    On the numerical treatment of the delamination problem in laminated composites under cleavage loading

    Charalampos Baniotopoulos & , 1 Jan 1995, In: Composite Structures. 30, 4, p. 453-466 14 p.

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published

    Synthesis of refractory metal carbide powders via microwave carbothermal reduction

    Jon Binner & , 1995, In: International Journal of Refractory Metals and Hard Materials. 13, 6, p. 353-358 6 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 Next