Browse Publications

  1. Chapter › Research
  2. Publications content icon
    Published

    Analysis of the movement variability in dance activities using wearable sensors

    Chris Baber, 1 Jan 2017, Biosystems and Biorobotics. Springer, p. 149-154 6 p. (Biosystems and Biorobotics; vol. 16).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  3. Publications content icon
    Published

    Current Knowledge in Hygienic Design: Can We Minimise Fouling and Speed Cleaning?

    Peter Fryer, Phillip Robbins, 1 Jan 2013, Food Engineering Series. Springer Vieweg, p. 209-227 19 p. (Food Engineering Series).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Publications content icon
    Published

    Dynamic discrete dislocation plasticity

    Benat Gurrutxaga Lerma, 21 Nov 2014, Advances in Applied Mechanics. C ed. Academic Press Inc., Vol. 47. p. 93-224 132 p. (Advances in Applied Mechanics; vol. 47, no. C).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  5. Publications content icon
    Published

    Environmental nanomechanical testing of polymers and nanocomposites

    Hanshan Dong, 2014, Nanomechanical Analysis Nanomechanical Analysis Materials. Springer Verlag, p. 63-84 22 p. (Solid Mechanics and its Applications; vol. 203).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  6. Publications content icon
    E-pub ahead of print

    Identifying motor units in longitudinal studies with high-density surface electromyography

    Eduardo Martinez Valdes, Deborah Falla, 13 Oct 2016, (E-pub ahead of print) Converging Clinical and Engineering Research on Neurorehabilitation II: Proceedings of the 3rd International Conference on NeuroRehabilitation (ICNR2016), October 18-21, 2016, Segovia, Spain. Ibanez, J., Gonzalez-Vargas, J., Azorin, J. M., Akay, M. & Pons, J. L. (eds.). Springer, Vol. 15. p. 147-151 5 p. (Biosystems and Biorobotics; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  7. Publications content icon
    Published

    The effect of mechanical arrangements on the performance of stirred tank systems

    Farid Benyahia, 1 Jan 1993, Experimental Thermal and Fluid Science. Elsevier, p. 489-495 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  8. Conference contribution › Research
  9. Publications content icon
    Published

    3D numerical simulation and PEPT experimental investigation of pressurized gas-solid fluidized bed hydrodynamic

    Andy Ingram, 1 Dec 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART C ed. p. 1833-1842 10 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Publications content icon
    Published

    A comparison of full scale and model scale measurements of train aerodynamic characteristics

    Christopher Baker, Andrew Quinn, Hassan Hemida, Mark Sterling, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 637-648 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Publications content icon
    Published

    A methodology for workspace identification of parallel robots using parametric sweep search method

    Mozafar Saadat, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Publications content icon
    Published

    A model of inclusion behaviour in liquid aluminium

    David Burnard & William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 92-96 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Publications content icon
    Published

    A novel predictive maintenance method for wind turbines based on wavelets transforms

    Mayorkinos Papaelias & Mani Entezami, 1 Jan 2012, 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012. British Institute of Non-Destructive Testing, Vol. 1. p. 15-27 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Publications content icon
    Published

    A performance and emission investigation of a marine diesel fuelled with B20, B50 and B100 microalgae (Schizochytrium sp.) oil without chemical additive

    Dawei Wu, 2020, RINA, Royal Institution of Naval Architects - International Conference on LNG/LPG and Alternative Fuel Ships 2020, Papers. Royal Institution of Naval Architects, p. 49-52 4 p. (RINA, Royal Institution of Naval Architects - International Conference on LNG/LPG and Alternative Fuel Ships 2020, Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Publications content icon
    Published

    A process model for electron beam welding with variable thickness

    Jianglin Huang, Jean-Christophe Gebelin, Richard Turner, 2 Aug 2013, Physical and Numerical Simulation of Materials Processing VII. p. 538-543 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Publications content icon
    Published

    A study of the behaviour of double oxide films in Al alloy melts

    William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 260-265 6 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Publications content icon
    Published

    A study on MR brake for an anti-lock braking system of a passenger vehicle

    Saikat Dutta, 10 Jul 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Publications content icon
    Published

    Adaptive control of a macro/micro bilateral teleoperation system under variable time delay

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 529-534 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Publications content icon
    Published

    Adsorption ice making and freeze water desalination using Metal Organic Framework materials

    Raya Al-Dadah, Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 54-58 5 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Publications content icon
    Published

    An investigation into double oxide film defects in aluminium alloys

    William Griffiths, 2014, Materials Science Forum. Trans Tech Publications Inc, Vol. 783-786. p. 142-147 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Publications content icon
    Published

    Applications and systematic errors of X-ray computed tomography associated with dimensional metrology

    Moataz Attallah, 2016, 55th Annual Conference of the British Institute of Non-Destructive Testing, NDT 2016. British Institute of Non-Destructive Testing, p. 337-345 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Publications content icon
    Published

    Architectural optimisation of distributed control systems for aero gas turbine engines using genetic algorithms

    Roger Dixon, 1 Dec 2011, 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Publications content icon
    Published

    Centrifugal casting of complex geometries: Computational modelling and validation experiments

    Dmytro Shevchenko, Nick Humphreys, Paul Withey, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. Cockcroft, S. & Maijer, D. (eds.). The Minerals, Metals and Materials Society, p. 77-84 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Publications content icon
    Published

    Co-simulation Testing of Data Communication System Supporting CBTC

    Xinnan Lyu, David Kirkwood, Lei Chen, Costas Constantinou & Clive Roberts, 30 Oct 2015, IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC. Institute of Electrical and Electronics Engineers (IEEE), Vol. 2015-October. p. 2665-2670 6 p. 7313520

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Publications content icon
    Published

    Comparison of oxide thickness of aluminium and the effects of selected alloying additions

    Elizabeth Hinton, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 180-184 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. Publications content icon
    Published

    Complex free surface flows for mould filling using centrifugal casting

    Nick Humphreys, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. The Minerals, Metals and Materials Society, p. 459-466 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  27. Publications content icon
    Published

    Condition monitoring of hydraulic power units in industrial wind turbines

    Mani Entezami, Stuart Hillmansen, Paul Weston & Mayorkinos Papaelias, 1 Jan 2013, 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013. British Institute of Non-Destructive Testing, Vol. 1. p. 289-302 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Publications content icon
    Published

    Design, construction and operation of a REPOINT laboratory demonstrator

    Roger Dixon, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 221-231 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Publications content icon
    Published

    Determination of the magnitude of interfacial air-gap and heat transfer during ingot casting into permanent metal moulds by numerical and experimental techniques

    Mark Ward & Roger Reed, 30 Aug 2013, Light Metals Technology 2013. p. 276-280 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Publications content icon
    Published

    Development and characterization of quasi-optical mesh filters and metastructures for subterahertz and terahertz applications

    Miguel Navarro-Cia, 2010, Key Engineering Materials. Vol. 437. p. 276-280 5 p. (Key Engineering Materials; vol. 437).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  31. Publications content icon
    Published

    Development of Small-Scale Axial Turbine for solar powered Brayton Cycle

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 170-175 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  32. Publications content icon
    Published

    Development of micro-scale radial inflow turbine for organic Rankine cycle

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 164-169 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Publications content icon
    Published

    Discrete adjoint sensitivities for the real-time optimal control of large district heating networks during failure events

    Adriano Sciacovelli, 11 Nov 2016, Energy. American Society of Mechanical Engineers(ASME), 13 p. V06AT08A028. (ASME 2016 International Mechanical Engineering Congress and Exposition; vol. 6A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Publications content icon
    Published

    Dynamic modelling of updraft gasifiers: Incidence of feedstock quality and operational variables in the transient model structure

    Roger Dixon, 11 Oct 2017, ASME Proceedings: Modeling and Validation. American Society of Mechanical Engineers(ASME), Vol. 3. 10 p. DSCC2017-5142

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  35. Publications content icon
    Published

    Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718

    Miren Aristizabal Segarra, Michael Loretto, Moataz Attallah, 1 Oct 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Publications content icon
    Published

    Effect of cellular dislocation structure on the strength of additively manufactured 316L stainless steel

    Sam Cruchley & Yu-Lung Chiu, 5 Jan 2021, THERMEC 2021: International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 1576-1584 9 p. (Materials Science Forum; vol. 1016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Publications content icon
    Published

    Effect of hydrophobicity on enhancement of condensation heat transfer-numerical-investigation

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 190-195 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Publications content icon
    Published

    Effect of novel alternative fuels and compositions on vibrations of a gas turbine engine

    Simon Blakey, 2014, 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 2014. American Institute of Aeronautics and Astronautics Inc. (AIAA), (50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 2014).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Publications content icon
    Published

    Energy harvesting from torsional vibrations using a nonlinear oscillator

    P Alevras, 21 Aug 2016, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers(ASME), Vol. 8. p. V008T10A001 9 p. DETC2016-59467

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Publications content icon
    Published

    Feature recognition & tool path generation for 5 axis step-nc machining of free form / irregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1235-1236 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. Publications content icon
    Published

    Impact of Automation on the Capacity of a Mainline Railway: A Preliminary Hypothesis and Methodology

    Gemma Nicholson, Clive Roberts & Bob Stone, 30 Oct 2015, Proceedings - 2015 IEEE 18th International Conference on Intelligent Transportation Systems: Smart Mobility for Safety and Sustainability, ITSC 2015. Institute of Electrical and Electronics Engineers (IEEE), Vol. 2015-October. p. 2097-2102 6 p. 7313431

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Publications content icon
    Published

    Impact of advanced blade configuration on small scale cryogenic axial turbine performance

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 248-253 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Publications content icon
    Published

    Improved melting and solidification in thermal energy storage through topology optimization of highly conductive fins

    Adriano Sciacovelli, 9 Jul 2017, Aerospace Heat Transfer; Computational Heat Transfer; Education; Environmental Heat Transfer; Fire and Combustion Systems; Gas Turbine Heat Transfer; Heat Transfer in Electronic Equipment; Heat Transfer in Energy Systems. American Society of Mechanical Engineers(ASME), 11 p. V001T09A018. (ASME 2017 Heat Transfer Summer Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Publications content icon
    Published

    Increasing the reliability of industrial multi-MW wind turbines

    Farzad Hayati, Hanshan Dong & Mayorkinos Papaelias, 12 Sep 2016, 55th Annual Conference of the British Institute of Non-Destructive Testing, NDT 2016. British Institute of Non-Destructive Testing, p. 102-113 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Publications content icon
    Published

    Influence of internal heat source on double-diffusive soret induced convection in a binary fluid

    Jamal Uddin, 14 Dec 2015, ICREM7 2015 - Proceedings of the 7th International Conference on Research and Education in Mathematics: Empowering Mathematical Sciences through Research and Education. Institute of Electrical and Electronics Engineers (IEEE), p. 88-92 5 p. 7357032

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Publications content icon
    Published

    Influence of microwave assisted freezing parameters on ice crystal growth

    Patricia Andreu Cabedo, Estefania Lopez-Quiroga, 2020, 6th IIR Conference on Sustainability and the Cold Chain, ICCC 2020 - Proceedings. International Institute of Refrigeration, p. 140-146 7 p. (Refrigeration Science and Technology; vol. 2020-August).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Publications content icon
    Published

    Integration of cad/ tool path data for 5-axis step-nc machining of free form / irrregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1233-1234 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Publications content icon
    Published

    Introduction of materials modelling into processing simulation

    Richard Turner, 2 Aug 2013, Physical and Numerical Simulation of Materials Processing VII. p. 266-276 11 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Publications content icon
    Published

    Inverse dynamic and control of a hybrid parallel robot

    Mozafar Saadat, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Publications content icon
    Published

    Investigation of the microstructure and bio-corrosion behaviour of Mg-Zn and Mg-Zn-Ca alloys

    Yu Lu, Yu-Lung Chiu & Ian Jones, 2013, Materials Science Forum. Vol. 765. p. 788-792 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. Publications content icon
    Published

    Investigation on heat transfer behaviour of supercritical nitrogen

    Ciprian Negoescu, Yongliang Li, Bushra Al-Duri & Yulong Ding, 2016, Proceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2016. Avestia Publishing, 2 p. HTFF 134

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. Publications content icon
    Published

    Lean principles and sustainable operation of high-speed railways

    Gemma Nicholson, Felix Schmid, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 815-824 10 p. (Stephenson Conference Research for Railways 2015; vol. 2015-April).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  53. Publications content icon
    Published

    Linear friction welding of titanium alloys for aeroengine applications: Modelling and validation

    Moataz Attallah, Jean-Christophe Gebelin, Roger Reed, 31 Jul 2013, ASM Proceedings of the International Conference: Trends in Welding Research. p. 886-892 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  54. Publications content icon
    Published

    Liquid nitrogen air conditioning system for domestic application

    Abdalqader Ahmad, Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 291-296 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Publications content icon
    Published

    Low frequency operation of Modular Multilevel Converters with embedded battery cells for traction drives

    Pietro Tricoli, 1 Aug 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). Institute of Electrical and Electronics Engineers (IEEE), p. 1375-1382 8 p. 7525982

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Publications content icon
    Published

    Mapping the underworld: Location phase II-latest developments

    Alexander Royal, Philip Atkins, David Chapman, Giulio Curioni, Kae Foo, Nicole Metje, 2010, 28th International No-Dig Conference and Exhibition 2010, NO-DIG 2010. p. 111-120 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Publications content icon
    Published

    Maximise the regenerative braking energy using linear programming

    Shaofeng Lu, Paul Weston & Ning Zhao, 20 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 2499-2504 6 p. 6958090. (IEEE Conference on Intelligent Transportation Systems (ITSC)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Publications content icon
    Published

    Mechanical integrity of hybrid components used in flexible optoelectronic devices

    Stuart Abell & Stephen Kukureka, 1 Dec 2008, Passive and Electromechanical Materials and Integration. p. 121-126 6 p. (Materials Research Society Symposium Proceedings; vol. 1075).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Publications content icon
    Published

    Microstructure-property development in friction stir welds of Al-Mg alloys

    Moataz Attallah & Martin Strangwood, 1 Dec 2009, ASM Proceedings of the International Conference: Trends in Welding Research. p. 358-363 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Publications content icon
    Published

    Model based control of permanent magnet AC servo motor drives

    Pietro Tricoli, 2 Feb 2017, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers (IEEE), 7837185

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Publications content icon
    Published

    Model-based fault detection on a non-linear rotor system

    Ramakrishnan Ambur, 1 Jan 2015, Proceedings of the 9th IFToMM International Conference on Rotor Dynamics. Kluwer Academic Publishers, Vol. 21. p. 679-688 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  62. Publications content icon
    Published

    Modelling of the effects of entrainment defects on mechanical properties in a cast Al-Si-Mg alloy

    Yang Yue, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 225-229 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Publications content icon
    Published

    Modelling of the potential for oxide film entrainment in light metal alloy castings

    William Griffiths, 2003, Modeling of Casting, Welding and Advanced Solidification Processes. Stefanescu, DM., Warren, J. A., Jolly, M. R., Krane, M. J. M., Stefanescu, D. M., Warren, J. A., Jolly, M. R. & Krane, M. J. M. (eds.). p. 415-422 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  64. Publications content icon
    E-pub ahead of print

    Modelling the relationship(s) between safety and operational performance

    Anson Jack & Felix Schmid, 14 Jun 2018, (E-pub ahead of print) Proceedings of the 2018 Joint Rail Conference. American Society of Mechanical Engineers(ASME), (2018 Joint Rail Conference, JRC 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  65. Publications content icon
    Published

    Motion simulation of a hybrid parallel robot for ankle rehabilitation

    Mozafar Saadat & Alireza Rastegarpanah, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  66. Publications content icon
    Published

    Novel adsorption system for cooling and power generation utilizing low grade heat sources

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 334-339 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  67. Publications content icon
    Published

    Numerical investigation of the two stage Wankel expander performance

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 345-350 6 p. ( International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. Publications content icon
    Published

    Observations of intermetallic compound formation of hot dip aluminized steel

    KeeHyun Park, 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 2 ed. Trans Tech Publications Ltd, p. 1871-1876 6 p. (Materials Science Forum; vol. 519-521, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Publications content icon
    Published

    Observer-based robust control with adaptive perturbation estimation for a piezoelectric actuator

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 497-505 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  70. Publications content icon
    Published

    One-dimensional and three-dimensional numerical optimization and comparison of single-stage supersonic and dual-stage transonic radial inflow turbines for the ORC

    Saad Mahmoud Mahmoud, Raya Al-Dadah, 1 Nov 2016, ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers(ASME), 15 p. V001T08A017. (ASME Power Conference (POWER); vol. 2016-January).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. Publications content icon
    Published

    Particle motion observed inside a laboratory-scale Knelson Concentrator using positron emission particle tracking

    Neil Rowson, 2014, IMPC 2014 - 27th International Mineral Processing Congress. Gecamin

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Publications content icon
    Published

    Path’s slicing analysis as a therapist’s intervention tool for robotic rehabilitation

    Mozafar Saadat, Alireza Rastegarpanah & Marco Maddalena, 2018, Advances in Service and Industrial Robotics - Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer, p. 901-910 10 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Publications content icon
    Published

    Railway vertical alignment optimisation at stations to minimise energy

    Tingyu Xin, Christian Roberts, Stuart Hillmansen, Libei Chen, 14 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 2119-2124 6 p. 6958016

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  74. Publications content icon
    Published

    Silver zeolites: Iodide occlusion and conversion to sodalite - A potential 129I waste form?

    Joseph Hriljac, 24 Jul 2006, 29th International Symposium on the Scientific Basis for Nuclear Waste Management XXIX. Vol. 932. p. 775-782 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Publications content icon
    Published

    Soil electromagnetic mapping for enhanced GPR utility location

    Chris Rogers, Nicole Metje & David Chapman, 2007, International Society for Trenchless Technology - 25th No-Dig International Conference and Exhibition, Roma 07: Mediterranean No-Dig 2007. p. 44-55 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Publications content icon
    Published

    Sol-gel preparation of HAp-coated silica macrospheres from water glass and their protein adsorption

    Artemis Stamboulis, 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 637-640 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Publications content icon
    Published

    State-observers for differential flatness model based-control of high-performance DC servomotor drives

    Pietro Tricoli, 2 Feb 2017, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers (IEEE), 7837481

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. Publications content icon
    Published

    Synthesis of pure dicalcium silicate powder by the pechini method and characterization of hydrated cement

    Gurpreet Chouhan & Liam Grover, 1 Jan 2014, Energy, Environment and Functional Materials. Trans Tech Publications Ltd, p. 387-394 8 p. (Materials Science Forum; vol. 787).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  79. Publications content icon
    Published

    The Mitigation Technology of Typical Low-Frequency Voltage Fluctuation in China Electrified Railway

    Pietro Tricoli, Stuart Hillmansen & Clive Roberts, 27 Aug 2018, SPEEDAM 2018 - Proceedings: International Symposium on Power Electronics, Electrical Drives, Automation and Motion. Institute of Electrical and Electronics Engineers (IEEE), p. 632-637 6 p. 8445197

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  80. Publications content icon
    Published

    The effect of hydrogen on porosity formation during electron beam welding of titanium alloys

    Jianglin Huang, Richard Turner, Jean-Christophe Gebelin, Nils Warnken, Martin Strangwood & Roger Reed, 2013, ASM Proceedings of the International Conference: Trends in Welding Research. DebRoy, T., David, S. A., DuPont, J., Koseki, T. & Bhadeshia, H. K. (eds.). ASM International, p. 868-875 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. Publications content icon
    Published

    The mapping the UK underworld project

    Chris Rogers, David Chapman, Alexander Royal & Nicole Metje, 2009, NASTT/ISTT International No-Dig Conference and Show 2009, including the Annual Technical Conference of North American Society for Trenchless Technology, No-Dig 2009. North American Society for Trenchless Technology (NASTT), Vol. 2. p. 1010-1019 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  82. Publications content icon
    Published

    The response of entrainment defect distribution to varied fluid flow parameters in the high pressure die casting of Al alloys

    William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 326-330 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  83. Publications content icon
    Published

    The variability of generalised cost weighting parameters

    Felix Schmid, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 609-622 14 p. (Stephenson Conference Research for Railways 2015; vol. 2015-April).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Publications content icon
    Published

    Time-frequency domain incipient fault detection with application to an aviation fuel system

    Simon Blakey, 2009, 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009. British Institute of Non-Destructive Testing, p. 764-775 12 p. (6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  85. Publications content icon
    Published

    Train trajectory optimisation of ATO systems for metro lines

    Ning Zhao, Clive Roberts, Stuart Hillmansen, Lei Chen, Zhongbei Tian, Tingyu Xin, 14 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 1796-1801 6 p. 6957953

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Publications content icon
    Published

    Understanding the Directional dependence of intergranular corrosion in aluminium alloys

    Alison Davenport, 2010, Materials Science Forum. Vol. 654-656. p. 946-949 4 p. (Materials Science Forum; vol. 654-656).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  87. Publications content icon
    Published

    VFH+ based shared control for remotely operated mobile robots

    Manolis Chiou & Rustam Stolkin, 4 Nov 2020, 2020 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2020. Marques, L., Khonji, M. & Dias, J. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 366-373 8 p. 9292585. (2020 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2020).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  88. Publications content icon
    Published

    Vibration minimization on a rotor system with adaptive algorithms using self-sensing piezoelectric actuators

    Ramakrishnan Ambur, 16 Sep 2016, Proceedings of VIRM 11- Vibrations in Rotating Machinery.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  89. Publications content icon
    Published

    Vibrational Analysis during Cell Injection in ICSI Operation

    Ferhat Sadak, Mozafar Saadat, Amir Hajiyavand, 3 Oct 2018, MARSS 2018 - International Conference on Manipulation, Automation and Robotics at Small Scales. Fatikow, S., Haliyo, S., Arai, F. & Sill, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 8481184. (MARSS 2018 - International Conference on Manipulation, Automation and Robotics at Small Scales).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  90. Publications content icon

    Viscous liquid-gas flow in horizontal pipelines: Experiments and multiphase flow simulator assessment

    1 Jan 2015, BHR Group - 17th International Conference on Multiphase Technology 2015. BHR Group Limited, p. 283-296 14 p. (BHR Group - 17th International Conference on Multiphase Technology 2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. Paper › Research › Peer-reviewed
  92. Publications content icon
    Published

    Semi-active vibration isolation of a quarter car model under random road excitations using magnetorheological damper

    Saikat Dutta, 1 Jan 2013, p. 999-1005. 7 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  93. Abstract › Research › Peer-reviewed
  94. Publications content icon
    Published

    Modeling of Contact Patch in Dual-Chamber Pneumatic Tyres

    Archie Kubba, Ammar Kubba, Remi Olatunbosun & Carl Anthony, 13 Sep 2016, p. 1.3-1.3. 1 p.

    Research output: Contribution to conference (unpublished)Abstractpeer-review

  95. Article › Research › Peer-reviewed
  96. Publications content icon
    Published
  97. Publications content icon
    Published

    A compact hybrid batch/semi-batch reverse osmosis (HBSRO) system for high-recovery, low-energy desalination

    Kiho Park & Philip Davies, 15 May 2021, In: Desalination. 504, 114976.

    Research output: Contribution to journalArticlepeer-review

  98. Publications content icon
    Published
  99. Publications content icon
    Published
  100. Publications content icon
    Published
  101. Publications content icon
    Published

    A finite-element-based approach to characterising FTire model for extended range of operation conditions

    Remi Olatunbosun, 5 Dec 2017, In: Vehicle System Dynamics. 55, 3, p. 295-312 18 p.

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published
  103. Publications content icon
    Published
  104. Publications content icon
    Published
  105. Publications content icon
    Published

    A modelling approach to yield strength optimisation in a nickel-base superalloy

    David Collins, Mar 2014, In: International Journal of Plasticity. 54, p. 96-112 17 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 4 5 6 Next