Browse Publications

  1. Conference contribution › Research
  2. Publications content icon
    Published

    A step change in the recycling of composite materials

    Geraldine Oliveux, & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Publications content icon
    Published

    Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

    Andy Ingram & Gary Leeke, 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Publications content icon
    Published

    Cerium-Cobalt-Copper oxides based SOFC anodes for the direct utilisation of methane as fuel

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 5 Jul 2016, Proceedings of the 12th European SOFC Forum. 12 ed. Lucerne: European Fuel Cell Forum, 10 p. B1314

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Publications content icon
    Published

    Commercialising university research: Thoughts on the challenges based on experience gained in the field of ceramic processing in the UK

    Jon Binner, 21 Oct 2013, Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII. Ohji, T., Singh, M., Kirihara, S. & Widjaja, S. (eds.). 8 ed. Wiley, Vol. 34. p. 161-175 15 p. (Ceramic Engineering and Science Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Publications content icon
    Published

    Electrochemical performance and carbon resistance comparison between Sn, Cu, Ag, and Rh-doped Ni/ScCeSZ anode SOFCs operated by biogas

    Ahmad El-Kharouf & Robert Steinberger-Wilckens, 20 Oct 2020, Proceedings of the 14th European SOFC and SOE Forum. Luzern: European Fuel Cell Forum, B0509

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Publications content icon
    Published

    Evaluation of Inkjet Printed Protective Layer Coatings for SOFC Interconnects

    Maria Galvez Sanchez, Ahmad El-Kharouf & Robert Steinberger-Wilckens, 17 May 2018, Proceedings of the 13th European SOFC and SOE Forum. Bucheli, O. & Spirig, M. (eds.). Lucerne: European Fuel Cell Forum, p. 1-12 12 p. B1302

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Publications content icon
    Published

    Finite strip analysis of cracked laminate: Stress based plane strain approach

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Publications content icon
    Published

    Impact deformation of large colony Ti6Al4V

    Mingyuan Chu, Yu-Lung Chiu & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 776-779 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Publications content icon
    Published

    Microstructure and microtexture of linear friction welded Ti-6Al-4V

    Yu-Lung Chiu, Hangyue Li, Moataz Attallah, & Paul Bowen, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 3. p. 1995-1999 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Publications content icon
    Published

    Numerical and experimental study of single fiber push-out test: Influence of fiber/matrix interface mechanical properties

    Santiago Corujeira Gallo, , Hanshan Dong, & , 2019, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Publications content icon
    Published

    Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent

    Andy Ingram & Gary Leeke, 26 Aug 2017, ICCM21. International Committee on Composite Materials (ICCM), Vol. 21. 9 p. 4054

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Publications content icon
    Published

    Optimisation of solvolysis for recycling carbon fibre reinforced composites

    Geraldine Oliveux & Gary Leeke, 26 Jun 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. European Society for Composite Materials, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Publications content icon
    Published

    Preparation of an oriented FIB bed Ti-6Al-4V sample for in situ TEM observations of dislocation transmission through α/β interfaces

    Ian Jones, & , 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 791-794 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Publications content icon
    Published

    Reducing degradation effects in SOFC stacks manufactured at Forschungszentrum Jülich - Approaches and results

    Robert Steinberger-Wilckens, 22 Dec 2008, Ceramic Engineering and Science Proceedings. 4 ed. Vol. 28. p. 65-77 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Publications content icon
    Published

    Reduction of transverse shear stiffnesses of transversely cracked laminates

    Farrukh Hafeez & , 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Publications content icon
    Published

    Scaling effects in glass reinforced Epoxy filament wound tubes subjected to quasi static indentation

    Farrukh Hafeez & , 1 Jan 2014, Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting. DEStech Publications Inc.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Publications content icon
    Published

    Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Michael Loretto, Moataz Attallah, & , 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Publications content icon
    Published

    Study on porosity formation in the keyhole mode electron beam full-penetration welding of titanium alloys

    Jianglin Huang, , Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 1624-1628 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Publications content icon
    Published

    The determination of carbon fibre bundle sizes by electrochemical impedance spectroscopy

    Geraldine Oliveux, Joe Wood, Michael Jenkins & Gary Leeke, 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Publications content icon
    Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Publications content icon
    Published

    Use of inter-fibril spaces among electrospun fibrils as ion-fixation and nano-crystallization

    Artemis Stamboulis, 2014, Advances in Bioceramics and Porous Ceramics VII: Ceramic Engineering and Science Proceedings. 5 ed. American Ceramic Society, Vol. 35. p. 33-38 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Paper › Research › Peer-reviewed
  24. Publications content icon
    Published

    A novel multi-functional sensor design for process monitoring

    Ramani Mahendran, Raj Machavaram, , , John Burns, Stephen Kukureka & Gerard Fernando, 1 Dec 2009.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  25. Publications content icon
    Published

    Effect of existing steel-to-embedded FRP shear reinforcement ratio on the behaviour of reinforced concrete T-beams

    Kagan Sogut, Samir Dirar, Marios Theofanous & Asaad Faramarzi, 2019, p. 11-16. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  26. Publications content icon
    Published

    Future directions in the recycling of composite materials

    Geraldine Oliveux, , , & Gary Leeke, 1 Jan 2015.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  27. Publications content icon
    Published

    Nonlinear finite element analysis of reinforced concrete beams strengthened in shear with embedded steel bars

    Kagan Sogut, Samir Dirar, , , Marios Theofanous & Asaad Faramarzi, 2019, p. 239-244. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  28. Publications content icon
    Published

    Numerical modelling of reinforced concrete beam-column joints shear-strengthened with embedded CFRP bars

    Samir Dirar, & Marios Theofanous, 2019, p. 245-250. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  29. Article › Research › Peer-reviewed
  30. Publications content icon
    Published

    2,7-Diazabicyclo[2.2.1]heptanes: novel asymmetric access and controlled bridge-opening

    Philip Craven, & Nigel Simpkins, 12 Mar 2019, In: Chemical Communications . 55, 29, p. 4214-4217 4 p.

    Research output: Contribution to journalArticlepeer-review

  31. Publications content icon
    Published
  32. Publications content icon
    Published

    3D printing of zirconia via digital light processing: optimization of slurry and debinding process

    Jon Binner & , Dec 2020, In: Journal of the European Ceramic Society. 40, 15, p. 5837-5844 8 p.

    Research output: Contribution to journalArticlepeer-review

  33. Publications content icon
    Published

    A bright tetranuclear iridium(III) complex

    Etienne Baranoff, 14 Mar 2011, In: Chemical Communications. 47, 10, p. 2799-2801 3 p.

    Research output: Contribution to journalArticlepeer-review

  34. Publications content icon
    Published

    A comparative study of the synthesis of nanocrystalline Yttrium Aluminium Garnet using sol-gel and co-precipitation methods

    Jon Binner, & , 1 Apr 2014, In: Ceramics International. 40, 3, p. 4179-4186

    Research output: Contribution to journalArticlepeer-review

  35. Publications content icon
    Published

    A cryogen-free HTS Josephson junction detector for terahertz imaging

    S. M. Hanham, , , , & , 1 Aug 2015, In: Superconductor Science and Technology. 28, 8, 084001.

    Research output: Contribution to journalArticlepeer-review

  36. Publications content icon
    Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  37. Publications content icon
    Published

    A new class of bioactive glasses: calcium-magnesium sulfophosphates

    Dave Bassett, , , , , , , & , Aug 2014, In: Journal of Biomedical Materials Research Part A. 102, 8, p. 2842-2848 7 p.

    Research output: Contribution to journalArticlepeer-review

  38. Publications content icon
    Published

    A novel protecting group methodology for syntheses using nitroxides

    Richard Grainger & , 14 Nov 2013, In: Chemical Communications. 49, 88, p. 10382-10384 3 p.

    Research output: Contribution to journalArticlepeer-review

  39. Publications content icon
    Published
  40. Publications content icon
    Published
  41. Publications content icon
    Published

    A synchrotron X-ray diffraction study of in situ biaxial deformation

    David Collins, , , & , 15 May 2015, In: Acta Materialia. 90, p. 46-58 13 p.

    Research output: Contribution to journalArticlepeer-review

  42. Publications content icon
    Published

    A synchrotron X-ray diffraction study of non-proportional strain-path effects

    David Collins, , , , , , & , 1 Feb 2017, In: Acta Materialia. 124, p. 290-304 15 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published
  44. Publications content icon
    Published

    Aminomaleimide fluorophores: a simple functional group with bright, solvent dependent emission

    Rachel O'Reilly, 14 Jun 2015, In: Chemical Communications . 51, 47, p. 9733-9736 4 p.

    Research output: Contribution to journalArticlepeer-review

  45. Publications content icon
    Published
  46. Publications content icon
    Published
  47. Publications content icon
    Published
  48. Publications content icon
    E-pub ahead of print
  49. Publications content icon
    Published

    Biopolymer-mediated synthesis of anisotropic piezoelectric nanorods

    Zoe Schnepp, 2 Jul 2010, In: Chemical Communications. 46, 27, p. 4887-4889 3 p.

    Research output: Contribution to journalArticlepeer-review

  50. Publications content icon
    Published

    Bullet proof

    Jon Binner, , , , , , , , , , & , 1 May 2013, In: Materials World. 21, 5, p. 26-29 4 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published
  52. Publications content icon
    Published
  53. Publications content icon
    Published

    Characterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation

    Liam Grover, 19 May 2017, In: Biomaterials Research. 21, 11 p., 7.

    Research output: Contribution to journalArticlepeer-review

  54. Publications content icon
    Published
  55. Publications content icon
    Published

    Comparison of spray freeze dried nanozirconia granules using ultrasonication and twin-fluid atomisation

    Jon Binner, & , 1 Apr 2014, In: Journal of the European Ceramic Society. 34, 4, p. 1001-1008 8 p.

    Research output: Contribution to journalArticlepeer-review

  56. Publications content icon
    Published

    Competition between densification and microstructure development during spark plasma sintering of B4C–Eu2O3

    1 Jun 2018, In: Journal of the American Ceramic Society. 101, 6, p. 2516-2526 11 p.

    Research output: Contribution to journalArticlepeer-review

  57. Publications content icon
    Published

    Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility

    Yu-Lung Chiu, , & , 1 Feb 2018, In: Acta Materialia. 144, p. 129-137 9 p.

    Research output: Contribution to journalArticlepeer-review

  58. Publications content icon
    Published
  59. Publications content icon
    Published
  60. Publications content icon
    E-pub ahead of print
  61. Publications content icon
    Published
  62. Publications content icon
    Published
  63. Publications content icon
    Published
  64. Publications content icon
    Published

    Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate

    Sandy Knowles, , & , 15 Jun 2018, In: Acta Materialia. 152, p. 301-314 14 p.

    Research output: Contribution to journalArticlepeer-review

  65. Publications content icon
    Published

    Development and tribological properties of SiC fibre reinforced CrB2 composite

    1 Oct 2017, In: Journal of the Australian Ceramic Society. 53, 2, p. 309-317 9 p.

    Research output: Contribution to journalArticlepeer-review

  66. Publications content icon
    Published
  67. Publications content icon
    Published

    Direct formation of 4,5-disubstituted carbazoles via regioselective dilithiation

    Ian Pocock, , , , , & Richard Grainger, 28 Jul 2021, In: Chemical communications (Cambridge, England). 57, 59, p. 7252-7255 4 p.

    Research output: Contribution to journalArticlepeer-review

  68. Publications content icon
    Published

    Dislocation density distribution at slip band-grain boundary intersections

    David Collins, , , & , Jan 2020, In: Acta Materialia. 182, p. 172-183 12 p.

    Research output: Contribution to journalArticlepeer-review

  69. Publications content icon
    Published

    Effect of TiSi2 addition on densification of Cerium hexaboride

    1 Jan 2016, In: Ceramics International. 42, 1, p. 891-896 6 p.

    Research output: Contribution to journalArticlepeer-review

  70. Publications content icon
    Published
  71. Publications content icon
    Published

    Effect of graphene nano-platelet reinforcement on the mechanical properties of hot pressed boron carbide based composite

    1 Jun 2018, In: Ceramics International. 44, 8, p. 9830-9838 9 p.

    Research output: Contribution to journalArticlepeer-review

  72. Publications content icon
    Published
  73. Publications content icon
    Published
  74. Publications content icon
    Published
  75. Publications content icon
    Accepted/In press
  76. Publications content icon
    Published
  77. Publications content icon
    E-pub ahead of print
  78. Publications content icon
    Published

    Empirical potentials for modeling solids, surfaces, and clusters

    Roy Johnston & , 1 Jan 1999, In: Journal of Solid State Chemistry. 145, 2, p. 517-540 24 p.

    Research output: Contribution to journalArticlepeer-review

  79. Publications content icon
    Published

    Enhanced light harvesting in mesoporous TiO2/P3HT hybrid solar cells using a porphyrin dye

    Etienne Baranoff, 7 Aug 2011, In: Chemical Communications. 47, 29, p. 8244-8246 3 p.

    Research output: Contribution to journalArticlepeer-review

  80. Publications content icon
    Published

    Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy

    David Collins, , , & , 1 Mar 2017, In: Acta Materialia. 126, p. 361-371 11 p.

    Research output: Contribution to journalArticlepeer-review

  81. Publications content icon
    Published

    Erosion and mechanical properties of hydrothermally-resistant nanostructured zirconia components

    Jon Binner & , 15 Jun 2018, In: Ceramics International. 44, 9, p. 10539-10544 6 p.

    Research output: Contribution to journalArticlepeer-review

  82. Publications content icon
    Published

    Evolution of dynamic fractures in poly(methyl methacrylate)

    Stuart Hillmansen, 1 Dec 2001, In: Plastics, Rubber and Composites Processing and Applications. 30, 2, p. 88-93 6 p.

    Research output: Contribution to journalArticlepeer-review

  83. Publications content icon
    Published

    Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing

    Hany Hassanin, , Moataz Attallah, & , Jul 2017, In: Acta Materialia. 133, p. 269-281 13 p.

    Research output: Contribution to journalArticlepeer-review

  84. Publications content icon
    E-pub ahead of print
  85. Publications content icon
    Published

    Experimental investigation of the scaling laws in laterally indented filament wound tubes supported with V shaped cradles

    Farrukh Hafeez & , 1 Aug 2015, In: Composite Structures. 126, p. 265-284 20 p.

    Research output: Contribution to journalArticlepeer-review

  86. Publications content icon
    Published

    Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying

    Moataz Attallah, 15 Apr 2020, In: Journal of Materials Science and Technology. 43, p. 40-43 4 p.

    Research output: Contribution to journalArticlepeer-review

  87. Publications content icon
    E-pub ahead of print

    First-principles study on ZnV2O6 and Zn2V2O7: Two new photoanode candidates for photoelectrochemical water oxidation

    Shangfeng Du & , 10 Jan 2018, (E-pub ahead of print) In: Ceramics International.

    Research output: Contribution to journalArticlepeer-review

  88. Publications content icon
    Published

    Fluid and particle dynamics in laser powder bed fusion

    Mark Ward, Moataz Attallah & , 1 Jan 2018, In: Acta Materialia. 142, p. 107-120 14 p.

    Research output: Contribution to journalArticlepeer-review

  89. Publications content icon
    E-pub ahead of print

    Formulation of Spinel based Inkjet Inks for Protective Layer Coatings in SOFC Interconnects

    Ahmad El-Kharouf & Robert Steinberger-Wilckens, 19 Jun 2020, (E-pub ahead of print) In: Journal of Colloid and Interface Science. 579, p. 82-95 JCIS-20-2524R1.

    Research output: Contribution to journalArticlepeer-review

  90. Publications content icon
    Published

    Friction and wear properties of zirconium diboride in sliding against WC ball

    1 Nov 2018, In: International Journal of Refractory Metals and Hard Materials. 76, p. 41-48 8 p.

    Research output: Contribution to journalArticlepeer-review

  91. Publications content icon
    Published

    Glass reinforced epoxy tubes subjected to indentation load: A study of scaling effects

    Farrukh Hafeez & , 1 Nov 2014, In: Composite Structures. 117, 1, p. 433-444 12 p.

    Research output: Contribution to journalArticlepeer-review

  92. Publications content icon
    Published

    Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy

    David Collins, , , , & , May 2013, In: Acta Materialia. 61, 9, p. 3378-3391 14 p.

    Research output: Contribution to journalArticlepeer-review

  93. Publications content icon
    Published

    Growth mechanism of subsurface hydrogen cavities in tungsten exposed to low-energy high-flux hydrogen plasma

    Yu-Lung Chiu, , , , , & , 31 Jul 2020, In: Acta Materialia. 193, p. 19-27 9 p.

    Research output: Contribution to journalArticlepeer-review

  94. Publications content icon
    Published

    Heat flux mapping of oxyacetylene flames and their use to characterise Cf-HfB2 composites

    Anish Paul, Jon Binner, , & , 9 Feb 2016, In: Advances in Applied Ceramics. 115, 3, p. 158-165 8 p.

    Research output: Contribution to journalArticlepeer-review

  95. Publications content icon
    E-pub ahead of print

    Heat partition in edge trimming of fiber reinforced polymer composites

    Farrukh Hafeez, 4 Feb 2020, (E-pub ahead of print) In: Journal of Composite Materials. 17 p.

    Research output: Contribution to journalArticlepeer-review

  96. Publications content icon
    Published

    High-speed synchrotron X-ray imaging of glass foaming and thermal conductivity simulation

    Biao Cai, 1 May 2020, In: Acta Materialia. 189, p. 85-92 8 p.

    Research output: Contribution to journalArticlepeer-review

  97. Publications content icon
    Published

    Highlights from Faraday Discussion: Chemistry in the urban atmosphere, United Kingdom, April 2016

    Zongbo Shi, Salim Alam & Irina Nikolova, 4 Jul 2016, In: Chemical Communications. 52, p. 9162-9172 11 p.

    Research output: Contribution to journalArticlepeer-review

  98. Publications content icon
    Published
  99. Publications content icon
    Published
  100. Publications content icon
    E-pub ahead of print

    Influence of novel anode design on the performance and coke resistance towards methane directly-fed solid oxide fuel cells

    Jong-Eun Hong, Robert Steinberger-Wilckens & , 2 Nov 2019, (E-pub ahead of print) In: Ceramics International. p. 1-35 35 p., CERI-D-19-06765.

    Research output: Contribution to journalArticlepeer-review

  101. Publications content icon
    Published

    Inorganic cements for biomedical application: Calcium phosphate, calcium sulphate and calcium silicate

    Parastoo Jamshidi & Liam Grover, 1 Feb 2015, In: Advances in Applied Ceramics. 114, 2, p. 65-76 12 p.

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published

    Laser drilling with a top-hat beam of micro-scale high aspect ratio holes in silicon nitride

    Vahid Nasrollahi, Pavel Penchev, Afif Batal, , Stefan Dimov & , 31 Jul 2020, In: Journal of Materials Processing Technology. 281, p. 1-9 9 p., 116636.

    Research output: Contribution to journalArticlepeer-review

  103. Publications content icon
    Published

    Lattice misfit during ageing of a polycrystalline nickel-base superalloy

    David Collins, , , , , & , Dec 2013, In: Acta Materialia. 61, 20, p. 7791-7804 14 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 Next