Browse Publications

  1. Chapter › Research
  2. Publications content icon
    Published

    Analysis of the movement variability in dance activities using wearable sensors

    Chris Baber, 1 Jan 2017, Biosystems and Biorobotics. Springer, p. 149-154 6 p. (Biosystems and Biorobotics; vol. 16).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  3. Publications content icon
    Published

    Current Knowledge in Hygienic Design: Can We Minimise Fouling and Speed Cleaning?

    Peter Fryer, Phillip Robbins, 1 Jan 2013, Food Engineering Series. Springer Vieweg, p. 209-227 19 p. (Food Engineering Series).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Publications content icon
    Published

    Dynamic discrete dislocation plasticity

    Benat Gurrutxaga Lerma, 21 Nov 2014, Advances in Applied Mechanics. C ed. Academic Press Inc., Vol. 47. p. 93-224 132 p. (Advances in Applied Mechanics; vol. 47, no. C).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  5. Publications content icon
    Published

    Environmental nanomechanical testing of polymers and nanocomposites

    Hanshan Dong, 2014, Nanomechanical Analysis Nanomechanical Analysis Materials. Springer Verlag, p. 63-84 22 p. (Solid Mechanics and its Applications; vol. 203).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  6. Publications content icon
    E-pub ahead of print

    Identifying motor units in longitudinal studies with high-density surface electromyography

    Eduardo Martinez Valdes, Deborah Falla, 13 Oct 2016, (E-pub ahead of print) Converging Clinical and Engineering Research on Neurorehabilitation II: Proceedings of the 3rd International Conference on NeuroRehabilitation (ICNR2016), October 18-21, 2016, Segovia, Spain. Ibanez, J., Gonzalez-Vargas, J., Azorin, J. M., Akay, M. & Pons, J. L. (eds.). Springer, Vol. 15. p. 147-151 5 p. (Biosystems and Biorobotics; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  7. Publications content icon
    Published

    The effect of mechanical arrangements on the performance of stirred tank systems

    Farid Benyahia, 1 Jan 1993, Experimental Thermal and Fluid Science. Elsevier, p. 489-495 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  8. Conference contribution › Research
  9. Publications content icon
    Published

    3D numerical simulation and PEPT experimental investigation of pressurized gas-solid fluidized bed hydrodynamic

    Andy Ingram, 1 Dec 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART C ed. p. 1833-1842 10 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Publications content icon
    Published

    A comparison of full scale and model scale measurements of train aerodynamic characteristics

    Christopher Baker, Andrew Quinn, Hassan Hemida, Mark Sterling, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 637-648 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Publications content icon
    Published

    A methodology for workspace identification of parallel robots using parametric sweep search method

    Mozafar Saadat, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Publications content icon
    Published

    A model of inclusion behaviour in liquid aluminium

    David Burnard & William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 92-96 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Publications content icon
    Published

    A novel predictive maintenance method for wind turbines based on wavelets transforms

    Mayorkinos Papaelias & Mani Entezami, 1 Jan 2012, 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012. British Institute of Non-Destructive Testing, Vol. 1. p. 15-27 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Publications content icon
    Published

    A performance and emission investigation of a marine diesel fuelled with B20, B50 and B100 microalgae (Schizochytrium sp.) oil without chemical additive

    Dawei Wu, 2020, RINA, Royal Institution of Naval Architects - International Conference on LNG/LPG and Alternative Fuel Ships 2020, Papers. Royal Institution of Naval Architects, p. 49-52 4 p. (RINA, Royal Institution of Naval Architects - International Conference on LNG/LPG and Alternative Fuel Ships 2020, Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Publications content icon
    Published

    A process model for electron beam welding with variable thickness

    Jianglin Huang, Jean-Christophe Gebelin, Richard Turner, 2 Aug 2013, Physical and Numerical Simulation of Materials Processing VII. p. 538-543 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Publications content icon
    Published

    A study of the behaviour of double oxide films in Al alloy melts

    William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 260-265 6 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Publications content icon
    Published

    A study on MR brake for an anti-lock braking system of a passenger vehicle

    Saikat Dutta, 10 Jul 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Publications content icon
    Published

    Adaptive control of a macro/micro bilateral teleoperation system under variable time delay

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 529-534 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Publications content icon
    Published

    Adsorption ice making and freeze water desalination using Metal Organic Framework materials

    Raya Al-Dadah, Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 54-58 5 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Publications content icon
    Published

    An investigation into double oxide film defects in aluminium alloys

    William Griffiths, 2014, Materials Science Forum. Trans Tech Publications Inc, Vol. 783-786. p. 142-147 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Publications content icon
    Published

    Applications and systematic errors of X-ray computed tomography associated with dimensional metrology

    Moataz Attallah, 2016, 55th Annual Conference of the British Institute of Non-Destructive Testing, NDT 2016. British Institute of Non-Destructive Testing, p. 337-345 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Publications content icon
    Published

    Architectural optimisation of distributed control systems for aero gas turbine engines using genetic algorithms

    Roger Dixon, 1 Dec 2011, 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Publications content icon
    Published

    Centrifugal casting of complex geometries: Computational modelling and validation experiments

    Dmytro Shevchenko, Nick Humphreys, Paul Withey, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. Cockcroft, S. & Maijer, D. (eds.). The Minerals, Metals and Materials Society, p. 77-84 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Publications content icon
    Published

    Co-simulation Testing of Data Communication System Supporting CBTC

    Xinnan Lyu, David Kirkwood, Lei Chen, Costas Constantinou & Clive Roberts, 30 Oct 2015, IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC. Institute of Electrical and Electronics Engineers (IEEE), Vol. 2015-October. p. 2665-2670 6 p. 7313520

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Publications content icon
    Published

    Comparison of oxide thickness of aluminium and the effects of selected alloying additions

    Elizabeth Hinton, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 180-184 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. Publications content icon
    Published

    Complex free surface flows for mould filling using centrifugal casting

    Nick Humphreys, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. The Minerals, Metals and Materials Society, p. 459-466 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  27. Publications content icon
    Published

    Condition monitoring of hydraulic power units in industrial wind turbines

    Mani Entezami, Stuart Hillmansen, Paul Weston & Mayorkinos Papaelias, 1 Jan 2013, 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013. British Institute of Non-Destructive Testing, Vol. 1. p. 289-302 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Publications content icon
    Published

    Design, construction and operation of a REPOINT laboratory demonstrator

    Roger Dixon, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 221-231 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Publications content icon
    Published

    Determination of the magnitude of interfacial air-gap and heat transfer during ingot casting into permanent metal moulds by numerical and experimental techniques

    Mark Ward & Roger Reed, 30 Aug 2013, Light Metals Technology 2013. p. 276-280 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Publications content icon
    Published

    Development and characterization of quasi-optical mesh filters and metastructures for subterahertz and terahertz applications

    Miguel Navarro-Cia, 2010, Key Engineering Materials. Vol. 437. p. 276-280 5 p. (Key Engineering Materials; vol. 437).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  31. Publications content icon
    Published

    Development of Small-Scale Axial Turbine for solar powered Brayton Cycle

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 170-175 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  32. Publications content icon
    Published

    Development of micro-scale radial inflow turbine for organic Rankine cycle

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 164-169 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Publications content icon
    Published

    Discrete adjoint sensitivities for the real-time optimal control of large district heating networks during failure events

    Adriano Sciacovelli, 11 Nov 2016, Energy. American Society of Mechanical Engineers(ASME), 13 p. V06AT08A028. (ASME 2016 International Mechanical Engineering Congress and Exposition; vol. 6A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Publications content icon
    Published

    Dynamic modelling of updraft gasifiers: Incidence of feedstock quality and operational variables in the transient model structure

    Roger Dixon, 11 Oct 2017, ASME Proceedings: Modeling and Validation. American Society of Mechanical Engineers(ASME), Vol. 3. 10 p. DSCC2017-5142

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  35. Publications content icon
    Published

    Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718

    Miren Aristizabal Segarra, Michael Loretto, Moataz Attallah, 1 Oct 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Publications content icon
    Published

    Effect of cellular dislocation structure on the strength of additively manufactured 316L stainless steel

    Sam Cruchley & Yu-Lung Chiu, 5 Jan 2021, THERMEC 2021: International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 1576-1584 9 p. (Materials Science Forum; vol. 1016).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Publications content icon
    Published

    Effect of hydrophobicity on enhancement of condensation heat transfer-numerical-investigation

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 190-195 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Publications content icon
    Published

    Effect of novel alternative fuels and compositions on vibrations of a gas turbine engine

    Simon Blakey, 2014, 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 2014. American Institute of Aeronautics and Astronautics Inc. (AIAA), (50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 2014).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Publications content icon
    Published

    Energy harvesting from torsional vibrations using a nonlinear oscillator

    P Alevras, 21 Aug 2016, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers(ASME), Vol. 8. p. V008T10A001 9 p. DETC2016-59467

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Publications content icon
    Published

    Feature recognition & tool path generation for 5 axis step-nc machining of free form / irregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1235-1236 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. Publications content icon
    Published

    Impact of Automation on the Capacity of a Mainline Railway: A Preliminary Hypothesis and Methodology

    Gemma Nicholson, Clive Roberts & Bob Stone, 30 Oct 2015, Proceedings - 2015 IEEE 18th International Conference on Intelligent Transportation Systems: Smart Mobility for Safety and Sustainability, ITSC 2015. Institute of Electrical and Electronics Engineers (IEEE), Vol. 2015-October. p. 2097-2102 6 p. 7313431

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Publications content icon
    Published

    Impact of advanced blade configuration on small scale cryogenic axial turbine performance

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 248-253 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Publications content icon
    Published

    Improved melting and solidification in thermal energy storage through topology optimization of highly conductive fins

    Adriano Sciacovelli, 9 Jul 2017, Aerospace Heat Transfer; Computational Heat Transfer; Education; Environmental Heat Transfer; Fire and Combustion Systems; Gas Turbine Heat Transfer; Heat Transfer in Electronic Equipment; Heat Transfer in Energy Systems. American Society of Mechanical Engineers(ASME), 11 p. V001T09A018. (ASME 2017 Heat Transfer Summer Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Publications content icon
    Published

    Increasing the reliability of industrial multi-MW wind turbines

    Farzad Hayati, Hanshan Dong & Mayorkinos Papaelias, 12 Sep 2016, 55th Annual Conference of the British Institute of Non-Destructive Testing, NDT 2016. British Institute of Non-Destructive Testing, p. 102-113 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Publications content icon
    Published

    Influence of internal heat source on double-diffusive soret induced convection in a binary fluid

    Jamal Uddin, 14 Dec 2015, ICREM7 2015 - Proceedings of the 7th International Conference on Research and Education in Mathematics: Empowering Mathematical Sciences through Research and Education. Institute of Electrical and Electronics Engineers (IEEE), p. 88-92 5 p. 7357032

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Publications content icon
    Published

    Influence of microwave assisted freezing parameters on ice crystal growth

    Patricia Andreu Cabedo, Estefania Lopez-Quiroga, 2020, 6th IIR Conference on Sustainability and the Cold Chain, ICCC 2020 - Proceedings. International Institute of Refrigeration, p. 140-146 7 p. (Refrigeration Science and Technology; vol. 2020-August).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Publications content icon
    Published

    Integration of cad/ tool path data for 5-axis step-nc machining of free form / irrregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1233-1234 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Publications content icon
    Published

    Introduction of materials modelling into processing simulation

    Richard Turner, 2 Aug 2013, Physical and Numerical Simulation of Materials Processing VII. p. 266-276 11 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Publications content icon
    Published

    Inverse dynamic and control of a hybrid parallel robot

    Mozafar Saadat, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Publications content icon
    Published

    Investigation of the microstructure and bio-corrosion behaviour of Mg-Zn and Mg-Zn-Ca alloys

    Yu Lu, Yu-Lung Chiu & Ian Jones, 2013, Materials Science Forum. Vol. 765. p. 788-792 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. Publications content icon
    Published

    Investigation on heat transfer behaviour of supercritical nitrogen

    Ciprian Negoescu, Yongliang Li, Bushra Al-Duri & Yulong Ding, 2016, Proceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2016. Avestia Publishing, 2 p. HTFF 134

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. Publications content icon
    Published

    Lean principles and sustainable operation of high-speed railways

    Gemma Nicholson, Felix Schmid, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 815-824 10 p. (Stephenson Conference Research for Railways 2015; vol. 2015-April).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  53. Publications content icon
    Published

    Linear friction welding of titanium alloys for aeroengine applications: Modelling and validation

    Moataz Attallah, Jean-Christophe Gebelin, Roger Reed, 31 Jul 2013, ASM Proceedings of the International Conference: Trends in Welding Research. p. 886-892 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  54. Publications content icon
    Published

    Liquid nitrogen air conditioning system for domestic application

    Abdalqader Ahmad, Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 291-296 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Publications content icon
    Published

    Low frequency operation of Modular Multilevel Converters with embedded battery cells for traction drives

    Pietro Tricoli, 1 Aug 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). Institute of Electrical and Electronics Engineers (IEEE), p. 1375-1382 8 p. 7525982

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Publications content icon
    Published

    Mapping the underworld: Location phase II-latest developments

    Alexander Royal, Philip Atkins, David Chapman, Giulio Curioni, Kae Foo, Nicole Metje, 2010, 28th International No-Dig Conference and Exhibition 2010, NO-DIG 2010. p. 111-120 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Publications content icon
    Published

    Maximise the regenerative braking energy using linear programming

    Shaofeng Lu, Paul Weston & Ning Zhao, 20 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 2499-2504 6 p. 6958090. (IEEE Conference on Intelligent Transportation Systems (ITSC)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Publications content icon
    Published

    Mechanical integrity of hybrid components used in flexible optoelectronic devices

    Stuart Abell & Stephen Kukureka, 1 Dec 2008, Passive and Electromechanical Materials and Integration. p. 121-126 6 p. (Materials Research Society Symposium Proceedings; vol. 1075).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Publications content icon
    Published

    Microstructure-property development in friction stir welds of Al-Mg alloys

    Moataz Attallah & Martin Strangwood, 1 Dec 2009, ASM Proceedings of the International Conference: Trends in Welding Research. p. 358-363 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Publications content icon
    Published

    Model based control of permanent magnet AC servo motor drives

    Pietro Tricoli, 2 Feb 2017, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers (IEEE), 7837185

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Publications content icon
    Published

    Model-based fault detection on a non-linear rotor system

    Ramakrishnan Ambur, 1 Jan 2015, Proceedings of the 9th IFToMM International Conference on Rotor Dynamics. Kluwer Academic Publishers, Vol. 21. p. 679-688 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  62. Publications content icon
    Published

    Modelling of the effects of entrainment defects on mechanical properties in a cast Al-Si-Mg alloy

    Yang Yue, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 225-229 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Publications content icon
    Published

    Modelling of the potential for oxide film entrainment in light metal alloy castings

    William Griffiths, 2003, Modeling of Casting, Welding and Advanced Solidification Processes. Stefanescu, DM., Warren, J. A., Jolly, M. R., Krane, M. J. M., Stefanescu, D. M., Warren, J. A., Jolly, M. R. & Krane, M. J. M. (eds.). p. 415-422 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  64. Publications content icon
    E-pub ahead of print

    Modelling the relationship(s) between safety and operational performance

    Anson Jack & Felix Schmid, 14 Jun 2018, (E-pub ahead of print) Proceedings of the 2018 Joint Rail Conference. American Society of Mechanical Engineers(ASME), (2018 Joint Rail Conference, JRC 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  65. Publications content icon
    Published

    Motion simulation of a hybrid parallel robot for ankle rehabilitation

    Mozafar Saadat & Alireza Rastegarpanah, 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  66. Publications content icon
    Published

    Novel adsorption system for cooling and power generation utilizing low grade heat sources

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 334-339 6 p. (International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  67. Publications content icon
    Published

    Numerical investigation of the two stage Wankel expander performance

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 9 Jan 2017, 2016 International Conference for Students on Applied Engineering (ICSAE). Al-Shibaany, Z. Y. A. & Hameed, A. F. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 345-350 6 p. ( International Conference for Students on Applied Engineering (ICSAE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. Publications content icon
    Published

    Observations of intermetallic compound formation of hot dip aluminized steel

    KeeHyun Park, 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 2 ed. Trans Tech Publications Ltd, p. 1871-1876 6 p. (Materials Science Forum; vol. 519-521, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Publications content icon
    Published

    Observer-based robust control with adaptive perturbation estimation for a piezoelectric actuator

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 497-505 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  70. Publications content icon
    Published

    One-dimensional and three-dimensional numerical optimization and comparison of single-stage supersonic and dual-stage transonic radial inflow turbines for the ORC

    Saad Mahmoud Mahmoud, Raya Al-Dadah, 1 Nov 2016, ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers(ASME), 15 p. V001T08A017. (ASME Power Conference (POWER); vol. 2016-January).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. Publications content icon
    Published

    Particle motion observed inside a laboratory-scale Knelson Concentrator using positron emission particle tracking

    Neil Rowson, 2014, IMPC 2014 - 27th International Mineral Processing Congress. Gecamin

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Publications content icon
    Published

    Path’s slicing analysis as a therapist’s intervention tool for robotic rehabilitation

    Mozafar Saadat, Alireza Rastegarpanah & Marco Maddalena, 2018, Advances in Service and Industrial Robotics - Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer, p. 901-910 10 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Publications content icon
    Published

    Railway vertical alignment optimisation at stations to minimise energy

    Tingyu Xin, Christian Roberts, Stuart Hillmansen, Libei Chen, 14 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 2119-2124 6 p. 6958016

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  74. Publications content icon
    Published

    Silver zeolites: Iodide occlusion and conversion to sodalite - A potential 129I waste form?

    Joseph Hriljac, 24 Jul 2006, 29th International Symposium on the Scientific Basis for Nuclear Waste Management XXIX. Vol. 932. p. 775-782 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Publications content icon
    Published

    Soil electromagnetic mapping for enhanced GPR utility location

    Chris Rogers, Nicole Metje & David Chapman, 2007, International Society for Trenchless Technology - 25th No-Dig International Conference and Exhibition, Roma 07: Mediterranean No-Dig 2007. p. 44-55 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Publications content icon
    Published

    Sol-gel preparation of HAp-coated silica macrospheres from water glass and their protein adsorption

    Artemis Stamboulis, 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 637-640 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Publications content icon
    Published

    State-observers for differential flatness model based-control of high-performance DC servomotor drives

    Pietro Tricoli, 2 Feb 2017, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers (IEEE), 7837481

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. Publications content icon
    Published

    Synthesis of pure dicalcium silicate powder by the pechini method and characterization of hydrated cement

    Gurpreet Chouhan & Liam Grover, 1 Jan 2014, Energy, Environment and Functional Materials. Trans Tech Publications Ltd, p. 387-394 8 p. (Materials Science Forum; vol. 787).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  79. Publications content icon
    Published

    The Mitigation Technology of Typical Low-Frequency Voltage Fluctuation in China Electrified Railway

    Pietro Tricoli, Stuart Hillmansen & Clive Roberts, 27 Aug 2018, SPEEDAM 2018 - Proceedings: International Symposium on Power Electronics, Electrical Drives, Automation and Motion. Institute of Electrical and Electronics Engineers (IEEE), p. 632-637 6 p. 8445197

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  80. Publications content icon
    Published

    The effect of hydrogen on porosity formation during electron beam welding of titanium alloys

    Jianglin Huang, Richard Turner, Jean-Christophe Gebelin, Nils Warnken, Martin Strangwood & Roger Reed, 2013, ASM Proceedings of the International Conference: Trends in Welding Research. DebRoy, T., David, S. A., DuPont, J., Koseki, T. & Bhadeshia, H. K. (eds.). ASM International, p. 868-875 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. Publications content icon
    Published

    The mapping the UK underworld project

    Chris Rogers, David Chapman, Alexander Royal & Nicole Metje, 2009, NASTT/ISTT International No-Dig Conference and Show 2009, including the Annual Technical Conference of North American Society for Trenchless Technology, No-Dig 2009. North American Society for Trenchless Technology (NASTT), Vol. 2. p. 1010-1019 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  82. Publications content icon
    Published

    The response of entrainment defect distribution to varied fluid flow parameters in the high pressure die casting of Al alloys

    William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 326-330 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  83. Publications content icon
    Published

    The variability of generalised cost weighting parameters

    Felix Schmid, 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 609-622 14 p. (Stephenson Conference Research for Railways 2015; vol. 2015-April).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Publications content icon
    Published

    Time-frequency domain incipient fault detection with application to an aviation fuel system

    Simon Blakey, 2009, 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009. British Institute of Non-Destructive Testing, p. 764-775 12 p. (6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  85. Publications content icon
    Published

    Train trajectory optimisation of ATO systems for metro lines

    Ning Zhao, Clive Roberts, Stuart Hillmansen, Lei Chen, Zhongbei Tian, Tingyu Xin, 14 Nov 2014, 2014 17th IEEE International Conference on Intelligent Transportation Systems, ITSC 2014. Institute of Electrical and Electronics Engineers (IEEE), p. 1796-1801 6 p. 6957953

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Publications content icon
    Published

    Understanding the Directional dependence of intergranular corrosion in aluminium alloys

    Alison Davenport, 2010, Materials Science Forum. Vol. 654-656. p. 946-949 4 p. (Materials Science Forum; vol. 654-656).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  87. Publications content icon
    Published

    VFH+ based shared control for remotely operated mobile robots

    Manolis Chiou & Rustam Stolkin, 4 Nov 2020, 2020 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2020. Marques, L., Khonji, M. & Dias, J. (eds.). Institute of Electrical and Electronics Engineers (IEEE), p. 366-373 8 p. 9292585. (2020 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2020).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  88. Publications content icon
    Published

    Vibration minimization on a rotor system with adaptive algorithms using self-sensing piezoelectric actuators

    Ramakrishnan Ambur, 16 Sep 2016, Proceedings of VIRM 11- Vibrations in Rotating Machinery.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  89. Publications content icon
    Published

    Vibrational Analysis during Cell Injection in ICSI Operation

    Ferhat Sadak, Mozafar Saadat, Amir Hajiyavand, 3 Oct 2018, MARSS 2018 - International Conference on Manipulation, Automation and Robotics at Small Scales. Fatikow, S., Haliyo, S., Arai, F. & Sill, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 8481184. (MARSS 2018 - International Conference on Manipulation, Automation and Robotics at Small Scales).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  90. Publications content icon

    Viscous liquid-gas flow in horizontal pipelines: Experiments and multiphase flow simulator assessment

    1 Jan 2015, BHR Group - 17th International Conference on Multiphase Technology 2015. BHR Group Limited, p. 283-296 14 p. (BHR Group - 17th International Conference on Multiphase Technology 2015).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. Paper › Research › Peer-reviewed
  92. Publications content icon
    Published

    Semi-active vibration isolation of a quarter car model under random road excitations using magnetorheological damper

    Saikat Dutta, 1 Jan 2013, p. 999-1005. 7 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  93. Abstract › Research › Peer-reviewed
  94. Publications content icon
    Published

    Modeling of Contact Patch in Dual-Chamber Pneumatic Tyres

    Archie Kubba, Ammar Kubba, Remi Olatunbosun & Carl Anthony, 13 Sep 2016, p. 1.3-1.3. 1 p.

    Research output: Contribution to conference (unpublished)Abstractpeer-review

  95. Article › Research › Peer-reviewed
  96. Publications content icon
    Published
  97. Publications content icon
    Published

    A compact hybrid batch/semi-batch reverse osmosis (HBSRO) system for high-recovery, low-energy desalination

    Kiho Park & Philip Davies, 15 May 2021, In: Desalination. 504, 114976.

    Research output: Contribution to journalArticlepeer-review

  98. Publications content icon
    Published
  99. Publications content icon
    Published
  100. Publications content icon
    Published
  101. Publications content icon
    Published

    A finite-element-based approach to characterising FTire model for extended range of operation conditions

    Remi Olatunbosun, 5 Dec 2017, In: Vehicle System Dynamics. 55, 3, p. 295-312 18 p.

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published
  103. Publications content icon
    Published
  104. Publications content icon
    Published
  105. Publications content icon
    Published

    A modelling approach to yield strength optimisation in a nickel-base superalloy

    David Collins, Mar 2014, In: International Journal of Plasticity. 54, p. 96-112 17 p.

    Research output: Contribution to journalArticlepeer-review

  106. Publications content icon
    Published
  107. Publications content icon
    E-pub ahead of print

    A neural network driving curve generation method for the heavy-haul train

    Lei Chen, 4 May 2016, (E-pub ahead of print) In: Advances in Mechanical Engineering. 8, 5, p. 1-14 14 p.

    Research output: Contribution to journalArticlepeer-review

  108. Publications content icon
    Published
  109. Publications content icon
    Published
  110. Publications content icon
    Published

    A new test apparatus to measure the adhesive shear strength of impact ice on titanium 6Al-4V alloy

    Benat Gurrutxaga Lerma, 1 Jun 2019, In: Engineering Fracture Mechanics. 214, p. 212-222 11 p.

    Research output: Contribution to journalArticlepeer-review

  111. Publications content icon
    Published
  112. Publications content icon
    Published
  113. Publications content icon
    Published
  114. Publications content icon
    Published
  115. Publications content icon
    Published
  116. Publications content icon
    Published

    A stochastic study of the collective effect of random distributions of dislocations

    Benat Gurrutxaga Lerma, 1 Mar 2019, In: Journal of the Mechanics and Physics of Solids. 124, p. 10-34 25 p.

    Research output: Contribution to journalArticlepeer-review

  117. Publications content icon
    Published

    A topology-based model for railway train control systems

    Felix Schmid, Lei Chen, Clive Roberts, 1 Jan 2013, In: IEEE Transactions on Intelligent Transportation Systems. 14, 2, p. 819-827 9 p., 6423284.

    Research output: Contribution to journalArticlepeer-review

  118. Publications content icon
    Published

    A waste cryogenic energy assisted freshwater generator for marine applications

    Dawei Wu, Athanasios Tsolakis, 15 Mar 2021, In: Desalination. 500, 114898.

    Research output: Contribution to journalArticlepeer-review

  119. Publications content icon
    Published
  120. Publications content icon
    Published
  121. Publications content icon
    Published

    Abrasive machining of advanced aerospace alloys and composites

    Leung Soo, 21 Aug 2015, In: CIRP Annals - Manufacturing Technology. 64, 2, p. 581-604 24 p.

    Research output: Contribution to journalArticlepeer-review

  122. Publications content icon
    Published

    Absolute instability of free-falling viscoelastic liquid jets with surfactants

    Jamal Uddin, 10 Jan 2020, In: Physics of Fluids. 32, 1, p. 1-14 14 p., 013102.

    Research output: Contribution to journalArticlepeer-review

  123. Publications content icon
    Published

    Access point deployment optimization in CBTC data communication system

    Costas Constantinou, Lei Chen, Zhongbei Tian & Clive Roberts, 1 Jun 2018, In: IEEE Transactions on Intelligent Transportation Systems. 19, 6, p. 1985-1995 11 p., 8115216.

    Research output: Contribution to journalArticlepeer-review

  124. Publications content icon
    Published
  125. Publications content icon
    Published

    Active-screen plasma multi-functionalization of graphene oxide for supercapacitor application

    Shaojun Qi, Xiao Tao, Xiaoying Li & Hanshan Dong, Feb 2021, In: Journal of Materials Science. 56, 4, p. 3296-3311 16 p.

    Research output: Contribution to journalArticlepeer-review

  126. Publications content icon
    Published

    Adhesion estimation at the wheel-rail interface using advanced model-based filtering

    Roger Dixon, 1 Dec 2012, In: Vehicle System Dynamics. 50, 12, p. 1797-1816 20 p.

    Research output: Contribution to journalArticlepeer-review

  127. Publications content icon
    Published

    Adiabatic shear banding and the micromechanics of plastic flow in metals

    Benat Gurrutxaga Lerma, 1 Feb 2018, In: International Journal of Solids and Structures. 132-133, p. 153-170 18 p.

    Research output: Contribution to journalArticlepeer-review

  128. Publications content icon
    Published

    Aerodynamic forces on generic buildings subject to transient, downburst-type winds

    Mike Jesson, Mark Sterling, 1 Feb 2015, In: Journal of Wind Engineering and Industrial Aerodynamics. 137, p. 58-68 11 p.

    Research output: Contribution to journalArticlepeer-review

  129. Publications content icon
    Published
  130. Publications content icon
    Published

    Air conditioning and power generation for residential applications using liquid nitrogen

    Abdalqader Ahmad, Raya Al-Dadah & Saad Mahmoud Mahmoud, 15 Dec 2016, In: Applied Energy. 184, p. 630-640 11 p.

    Research output: Contribution to journalArticlepeer-review

  131. Publications content icon
    Published
  132. Publications content icon
    Published
  133. Publications content icon
    Published

    An experimental and theoretical investigation of particle-wall impacts in a T-junction

    Daniele Vigolo, Jul 2013, In: Journal of Fluid Mechanics. 727, p. 236-255 20 p.

    Research output: Contribution to journalArticlepeer-review

  134. Publications content icon
    Published
  135. Publications content icon
    Published

    An experimental study on particle evolution in the exhaust gas of a direct injection SI engine

    Haoye Liu, Chongming Wang, Hongming Xu & Xiao Ma, 15 Feb 2020, In: Applied Energy. 260, 114220.

    Research output: Contribution to journalArticlepeer-review

  136. Publications content icon
    Published
  137. Publications content icon
    E-pub ahead of print
  138. Publications content icon
    E-pub ahead of print
  139. Publications content icon
    Published
  140. Publications content icon
    Published

    Analysis of the robustness of terminal turnaround arrangements for railways

    Gemma Nicholson, Clive Roberts & Felix Schmid, 28 Jan 2016, In: IET Intelligent Transport Systems. 10, 1, p. 41-49 9 p.

    Research output: Contribution to journalArticlepeer-review

  141. Publications content icon
    Published

    Analysis on the effect of a nonuniform inlet profile on heat transfer and fluid flow in turbine stages

    Imran Qureshi, 26 May 2011, In: Journal of Turbomachinery. 134, 1, 011012.

    Research output: Contribution to journalArticlepeer-review

  142. Publications content icon
    Published

    Anomalously large spectral shifts near the quantum tunnelling limit in plasmonic rulers with subatomic resolution

    Angela Demetriadou, 13 Mar 2019, In: Nano Letters. 19, 3, p. 2051-2058 8 p.

    Research output: Contribution to journalArticlepeer-review

  143. Publications content icon
    Published
  144. Publications content icon
    Published

    Art on the Nanoscale and Beyond

    Ali Yetisen, Haider Butt, 2 Mar 2016, In: Advanced Materials. 28, 9, p. 1724–1742

    Research output: Contribution to journalArticlepeer-review

  145. Publications content icon
    Published

    Assessing energy storage technology options using a multi-criteria decision analysis-based framework

    Daniel Murrant & Jonathan Radcliffe, 1 Dec 2018, In: Applied Energy. 231, p. 788-802 15 p.

    Research output: Contribution to journalArticlepeer-review

  146. Publications content icon
    Published

    Assessment of X-ray diffraction and crystal plasticity lattice strain evolutions under biaxial loading

    David Collins, Aug 2016, In: International Journal of Plasticity. 83, p. 1-18 18 p.

    Research output: Contribution to journalArticlepeer-review

  147. Publications content icon
    Published

    Assessment of gasoline direct injector fouling effects on fuel injection, engine performance and emissions

    Mohammadreza Anbari Attar, Hongming Xu, 15 Jun 2018, In: Applied Energy. 220, p. 351-374 24 p.

    Research output: Contribution to journalArticlepeer-review

  148. Publications content icon
    Published

    Aviation gas turbine alternative fuels: A review

    Simon Blakey, 2011, In: Proceedings of the Combustion Institute. 33, 2, p. 2863-2885 23 p.

    Research output: Contribution to journalArticlepeer-review

  149. Publications content icon
    Published

    Benchmarking protocol for grasp planning algorithms

    Yasemin Bekiroglu, Naresh Marturi & Rustam Stolkin, Apr 2020, In: IEEE Robotics and Automation Letters. 5, 2, p. 315-322 8 p., 8917672.

    Research output: Contribution to journalArticlepeer-review

  150. Publications content icon
    Published

    Beneficiation of the Nechalacho rare earth deposit. Part 1: Gravity and magnetic separation

    Neil Rowson, 1 Dec 2016, In: Minerals Engineering. 99, p. 111-122 12 p.

    Research output: Contribution to journalArticlepeer-review

  151. Publications content icon
    Published
  152. Publications content icon
    Published

    Broadband terahertz plasmonic response of touching InSb disks

    S. M. Hanham, 11 Sep 2012, In: Advanced Materials. 24, 35

    Research output: Contribution to journalArticlepeer-review

  153. Publications content icon
    Published
  154. Publications content icon
    Published

    COBBOOM: The Continental Breakup and Birth of Oceans Mission

    Tim Reston, 1 Sep 2007, In: Scientific Drilling. 5, p. 13-25 13 p.

    Research output: Contribution to journalArticlepeer-review

  155. Publications content icon
    Published

    CPO-27(Ni), aluminium fumarate and MIL-101(Cr) MOF materials for adsorption water desalination

    Raya Al-Dadah, Saad Mahmoud Mahmoud, Paul Anderson, 16 Mar 2017, In: Desalination. 406, p. 25-36 12 p.

    Research output: Contribution to journalArticlepeer-review

  156. Publications content icon
    Published

    Can nanotubes make a lens array?

    Haider Butt, 19 Jun 2012, In: Advanced Materials. 24, 23

    Research output: Contribution to journalArticlepeer-review

  157. Publications content icon
    Published

    Capillary-scale solid rebounds: experiments, modelling and simulations

    Carlos Galeano Rios, 10 Apr 2021, In: Journal of Fluid Mechanics. 912, 31 p., A17.

    Research output: Contribution to journalArticlepeer-review

  158. Publications content icon
    Published
  159. Publications content icon
    Published
  160. Publications content icon
    Published

    Characterisation of nano-sized Al-Mn-(Mg) particles in AZ91 and their effect on Mg17Al12 precipitation

    Ian Jones, 2013, In: Journal of Alloys and Compounds. 579, p. 34-38 5 p.

    Research output: Contribution to journalArticlepeer-review

  161. Publications content icon
    Published
  162. Publications content icon
    Published

    Characterization of hot-steam oxidation tested chromosiliconized heat-resistant austenitic stainless steel

    Xiaoying Li, Hanshan Dong, 5 Oct 2012, In: MATERIALS TRANSACTIONS. 53, 6, p. 1090-1093 4 p.

    Research output: Contribution to journalArticlepeer-review

  163. Publications content icon
    Published

    Characterizing external flashing jet from single-hole GDI injector

    Hongming Xu, 1 Jun 2018, In: International Journal of Heat and Mass Transfer. 121, p. 924-932 9 p.

    Research output: Contribution to journalArticlepeer-review

  164. Publications content icon
    Published
  165. Publications content icon
    Published
  166. Publications content icon
    Published
  167. Publications content icon
    Published
  168. Publications content icon
    Published

    Concentrated vertical jetting mechanism for isotropically focused Zno/Si surface acoustic waves

    Mehdi Jangi, 1 May 2019, In: International Journal of Multiphase Flow. 114, p. 1-8 8 p.

    Research output: Contribution to journalArticlepeer-review

  169. Publications content icon
    Published

    Condition monitoring for a neutral beam injector cryopumping system

    Roger Dixon, 11 Mar 2013, In: Fusion Engineering and Design. 88, 6-8, p. 1236-1239 4 p.

    Research output: Contribution to journalArticlepeer-review

  170. Publications content icon
    Published

    Control and dynamics of a SDOF system with piecewise linear stiffness and combined external excitations

    P Alevras, 1 Jan 2014, In: Probabilistic Engineering Mechanics. 35, p. 118-124 7 p.

    Research output: Contribution to journalArticlepeer-review

  171. Publications content icon
    Published

    Control of a shimmy vibration in vehicle steering system using a magneto-rheological damper

    Saikat Dutta, 1 Feb 2018, In: JVC/Journal of Vibration and Control. 24, 4, p. 797-807 11 p.

    Research output: Contribution to journalArticlepeer-review

  172. Publications content icon
    E-pub ahead of print
  173. Publications content icon
    Published

    Correlations of pressure drop in packed beds taking into account the effect of confining wall

    Farid Benyahia, 1 Jan 1993, In: International Journal of Heat and Mass Transfer. 36, 2, p. 536-540 5 p.

    Research output: Contribution to journalArticlepeer-review

  174. Publications content icon
    Published
  175. Publications content icon
    Published

    Cr-Mo-V-W: A new refractory and transition metal high-entropy alloy system

    Sandy Knowles, 1 Jan 2019, In: Scripta Materialia. 158, p. 141-145 5 p.

    Research output: Contribution to journalArticlepeer-review

  176. Publications content icon
    Published

    Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy

    Moataz Attallah, 15 Jul 2019, In: Materials and Design. 174, 107793.

    Research output: Contribution to journalArticlepeer-review

  177. Publications content icon
    Published

    Critical dimension for the dislocation structure in deformed copper micropillars

    Yu-Lung Chiu, Ian Jones, 1 Apr 2019, In: Scripta Materialia. 163, p. 137-141 5 p.

    Research output: Contribution to journalArticlepeer-review

  178. Publications content icon
    Published
  179. Publications content icon
    Published

    DC-electro softening in soda lime silicate glass: an electro-thermal analysis

    Jon Binner, 1 Jul 2018, In: Scripta Materialia. 151, p. 14-18 5 p.

    Research output: Contribution to journalArticlepeer-review

  180. Publications content icon
    Published
  181. Publications content icon
    Published

    Densification, Microstructural Evolution, Mechanical Properties and Oxidation Study of CrB2 + EuB6 Composite

    1 May 2018, In: Journal of Materials Engineering and Performance. 27, 5, p. 2457-2465 9 p.

    Research output: Contribution to journalArticlepeer-review

  182. Publications content icon
    Published

    Design and validation of a nonlinear vibration absorber to attenuate torsional oscillations of propulsion systems

    P Alevras, 5 Feb 2020, In: Nonlinear Dynamics. 100, 1, p. 33-49 17 p.

    Research output: Contribution to journalArticlepeer-review

  183. Publications content icon
    E-pub ahead of print

    Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachinery

    Kyle Jiang, 15 Mar 2018, (E-pub ahead of print) In: Propulsion and Power Research. 7, 1, p. 19-29 11 p.

    Research output: Contribution to journalArticlepeer-review

  184. Publications content icon
    Published
  185. Publications content icon
    Published

    Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material

    Manuel Banzhaf, 5 Dec 2019, In: Materials and Design. 183, 12 p., 108154.

    Research output: Contribution to journalArticlepeer-review

  186. Publications content icon
    Published
  187. Publications content icon
    Published

    Determination of the Failure Stresses for Fluid-filled Microcapsules that Rupture Near the Elastic Regime

    Ruben Mercade-Prieto, Jon Preece & Zhibing Zhang, Nov 2012, In: Experimental Mechanics. 52, 9, p. 1435-1445 11 p.

    Research output: Contribution to journalArticlepeer-review

  188. Publications content icon
    Published
  189. Publications content icon
    Published

    Development and experimental validation of a real-time analytical model for different intelligent tyre concepts

    Remi Olatunbosun, 2 Dec 2019, In: Vehicle System Dynamics. 57, 12, p. 1970-1988 19 p.

    Research output: Contribution to journalArticlepeer-review

  190. Publications content icon
    Published
  191. Publications content icon
    Published
  192. Publications content icon
    Accepted/In press

    Development of an Apparatus for Testing of High-Temperature Static Seals

    Simon Blakey, 2020, (Accepted/In press) In: Tribology Transactions.

    Research output: Contribution to journalArticlepeer-review

  193. Publications content icon
    Published

    Development of an apparatus for the degradation of aviation gas turbine Lubricants

    Simon Blakey, 2013, In: Tribology Transactions. 56, 2, p. 215-223 9 p.

    Research output: Contribution to journalArticlepeer-review

  194. Publications content icon
    Published

    Developments in hot-streak simulators for turbine testing

    Imran Qureshi, 1 Jul 2009, In: Journal of Turbomachinery. 131, 3, 031009.

    Research output: Contribution to journalArticlepeer-review

  195. Publications content icon
    E-pub ahead of print
  196. Publications content icon
    Published

    Direct laser fabrication of three dimensional components using SC420 stainless steel

    Xinjiang Hao, Nicholas Wain, Xiao Wu & Moataz Attallah, 1 May 2013, In: Materials and Design. 47, p. 731-736 6 p.

    Research output: Contribution to journalArticlepeer-review

  197. Publications content icon
    Published

    Direct mineral tracer activation in positron emission particle tracking of a flotation cell

    Thomas Leadbeater, Neil Rowson, 1 Jan 2017, In: Minerals Engineering. 100, p. 155-165 11 p.

    Research output: Contribution to journalArticlepeer-review

  198. Publications content icon
    Published
  199. Publications content icon

    Discharge coefficient of high viscosity liquids through nozzles

    May 2019, In: Experimental Thermal and Fluid Science. 103, p. 1-8 8 p.

    Research output: Contribution to journalArticlepeer-review

  200. Publications content icon
    Published
  201. Publications content icon
    E-pub ahead of print
  202. Publications content icon
    Published

    Dynamic contact strain measurement by time-resolved stroboscopic energy dispersive synchrotron X-ray diffraction

    David Collins, 1 Apr 2017, In: Strain. 53, 2, e12221.

    Research output: Contribution to journalArticlepeer-review

  203. Publications content icon
    Published

    Dynamics of a parametric rotating pendulum under a realistic wave profile

    P Alevras, 1 Jun 2016, In: International Journal of Dynamics and Control. 4, 2, p. 233-238 6 p.

    Research output: Contribution to journalArticlepeer-review

  204. Publications content icon
    Published

    Dynamics of the N-pendulum and its application to a wave energy converter concept

    P Alevras, 1 Dec 2013, In: International Journal of Dynamics and Control. 1, 4, p. 290-299 10 p.

    Research output: Contribution to journalArticlepeer-review

  205. Publications content icon
    Published

    Effect of aggressive inlet swirl on heat transfer and aerodynamics in an unshrouded transonic hp turbine

    Imran Qureshi, 4 Sep 2012, In: Journal of Turbomachinery. 134, 6, 061023.

    Research output: Contribution to journalArticlepeer-review

  206. Publications content icon
    Published

    Effect of bridge abutment length on turbulence structure and flow through the opening

    Bruno Fraga, 1 Jun 2019, In: Journal of Hydraulic Engineering. 145, 6, 04019024.

    Research output: Contribution to journalArticlepeer-review

  207. Publications content icon
    Published

    Effect of fibre reinforcement on the friction and wear of polyamide 66 under dry rolling-sliding contact

    Stephen Kukureka, 1 Jan 1999, In: Tribology International. 32, 2, p. 107-116 10 p.

    Research output: Contribution to journalArticlepeer-review

  208. Publications content icon
    Published
  209. Publications content icon
    Published

    Effect of grain size reduction of AA2124 aluminum alloy powder compacted by spark plasma sintering

    Moataz Attallah, 5 Oct 2014, In: Journal of Alloys and Compounds. 609, p. 215-221 7 p.

    Research output: Contribution to journalArticlepeer-review

  210. Publications content icon
    Published
  211. Publications content icon
    Published
  212. Publications content icon
    Published
  213. Publications content icon
    Published
  214. Publications content icon
    E-pub ahead of print
  215. Publications content icon
    Published

    Effects of EGR on the structure and emissions of diesel combustion

    Mehdi Jangi, 11 Jan 2013, In: Proceedings of the Combustion Institute. 34, 2, p. 3091-3098 8 p.

    Research output: Contribution to journalArticlepeer-review

  216. Publications content icon
    Published
  217. Publications content icon
    Published
  218. Publications content icon
    Published
  219. Publications content icon
    Published

    Electricity consumption probability density forecasting method based on LASSO-Quantile Regression Neural Network

    Shuo Wang, 1 Jan 2019, In: Applied Energy. 233-234, p. 565-575 11 p.

    Research output: Contribution to journalArticlepeer-review

  220. Publications content icon
    Published

    Electrochemical detection of baicalein based on a three-dimensional micromixer

    Yongliang Li, Dec 2020, In: Journal of Micromechanics and Microengineering. 30, 12, 125017.

    Research output: Contribution to journalArticlepeer-review

  221. Publications content icon
    Published

    Electromagnetic functionalization of wide-bandgap dielectric oxides by boron interstitial doping

    Andrew Morris & 2 others, , 26 Sep 2018, In: Advanced Materials. 30, 39, 9 p., 1802025.

    Research output: Contribution to journalArticlepeer-review

  222. Publications content icon
    Published
  223. Publications content icon
    Published

    Energy poverty and indoor cooling: an overlooked issue in Europe

    Harriet Thomson, Stefan Bouzarovski & Saska Petrova, 1 Aug 2019, In: Energy and Buildings. 196, p. 21-29 9 p.

    Research output: Contribution to journalArticlepeer-review

  224. Publications content icon
    E-pub ahead of print

    Energy-efficient heating strategies of diesel oxidation catalyst for low emissions vehicles

    Omid Doustdar, Athanasios Tsolakis, 1 Sep 2021, In: Energy. 230, 19 p., 120819.

    Research output: Contribution to journalArticlepeer-review

  225. Publications content icon
    Published
  226. Publications content icon
    Published
  227. Publications content icon
    Published
  228. Publications content icon
    Published

    Evaluation of damping and elastic properties of composites and composite structures by the resonance technique

    Stephen Kukureka, 1 Aug 2000, In: Journal of Materials Science. 35, 15, p. 3785-3792 8 p.

    Research output: Contribution to journalArticlepeer-review

  229. Publications content icon
    Published

    Evaluation of superabrasive grinding points for the machining of hardened steel

    Richard Hood, Fernanda Medina Medina Aguirre, Luis Soriano Gonzalez & Leung Soo, 4 Jul 2019, In: CIRP Annals. 68, 1, p. 329-332 4 p.

    Research output: Contribution to journalArticlepeer-review

  230. Publications content icon
    E-pub ahead of print
  231. Publications content icon
    Published
  232. Publications content icon
    Published
  233. Publications content icon
    Published

    Experimental and numerical characterization of sub-zero phase change materials for cold thermal energy storage

    Yongliang Li, 1 Oct 2020, In: Applied Energy. 275, 115131.

    Research output: Contribution to journalArticlepeer-review

  234. Publications content icon
    Published
  235. Publications content icon
    Published
  236. Publications content icon
    Published

    Experimental investigation of a rotating parametric pendulum

    P Alevras, 10 Jul 2015, In: Nonlinear Dynamics. 81, 1-2, p. 201-213 13 p.

    Research output: Contribution to journalArticlepeer-review

  237. Publications content icon
    Published
  238. Publications content icon
    Published
  239. Publications content icon
    Published

    Experimental observations of the behaviour of a bubble inside a circular rigid tube

    Qian Wang, 1 Dec 2019, In: International Journal of Multiphase Flow. 121, 9 p., 103096.

    Research output: Contribution to journalArticlepeer-review

  240. Publications content icon
    Published
  241. Publications content icon
    Published

    Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying

    Moataz Attallah, 15 Apr 2020, In: Journal of Materials Science and Technology. 43, p. 40-43 4 p.

    Research output: Contribution to journalArticlepeer-review

  242. Publications content icon
    Published

    Fatigue crack growth behaviour in single-colony lamellar structure of Ti–6Al–4V

    Rengen Ding, Paul Bowen, 1 May 2019, In: Scripta Materialia. 165, p. 107-111 5 p.

    Research output: Contribution to journalArticlepeer-review

  243. Publications content icon
    Published

    Feasibility of a kneeling train to improve platform-train interface for passenger boarding and alighting

    Ramakrishnan Ambur, 1 Oct 2020, In: IET Intelligent Transport Systems. 14, 10, p. 1163-1170 8 p.

    Research output: Contribution to journalArticlepeer-review

  244. Publications content icon
    Published

    Finite element analysis of nanosecond pulsed laser ablation of various materials

    Rajib Ahmed & Haider Butt, 31 Dec 2017, In: World Journal of Engineering. 14, 6, p. 489-496 8 p.

    Research output: Contribution to journalArticlepeer-review

  245. Publications content icon
    Published
  246. Publications content icon
    Published

    Flame kernel evolution and shock wave propagation with laser ignition in ethanol-air mixtures

    Amrit Sahu & Hongming Xu, 1 Jan 2019, In: Applied Energy. 233-234, p. 86-98 13 p.

    Research output: Contribution to journalArticlepeer-review

  247. Publications content icon
    Published
  248. Publications content icon
    Published

    Fracture of three-dimensional lattices manufactured by selective laser melting

    Sheng Li, Moataz Attallah, 15 Dec 2019, In: International Journal of Solids and Structures. 180-181, p. 147-159 13 p.

    Research output: Contribution to journalArticlepeer-review

  249. Publications content icon
    Published

    Friction and wear properties of zirconium diboride in sliding against WC ball

    1 Nov 2018, In: International Journal of Refractory Metals and Hard Materials. 76, p. 41-48 8 p.

    Research output: Contribution to journalArticlepeer-review

  250. Publications content icon
    Published

    GPU computing for accelerating the numerical Path Integration approach

    P Alevras, 15 Jul 2016, In: Computers and Structures. 171, p. 46-53 8 p.

    Research output: Contribution to journalArticlepeer-review

  251. Publications content icon
    Published

    Graded structure of laser direct manufacturing bulk metallic glass

    Yu-Lung Chiu, 1 Dec 2018, In: Intermetallics. 103, p. 67-71 5 p.

    Research output: Contribution to journalArticlepeer-review

  252. Publications content icon
    Published

    Grain growth on reheating for an as-cast Al-Nb-containing steel with segregated composition

    Martin Strangwood, 24 Mar 2019, In: Materials Science and Technology (United Kingdom). 35, 5, p. 615-627 13 p.

    Research output: Contribution to journalArticlepeer-review

  253. Publications content icon
    Published
  254. Publications content icon
    Published

    Guest-tunable dielectric sensing using a single Crystal of HKUST-1

    Hamish Yeung, 23 Jul 2020, In: Advanced Materials Interfaces. 7, 14, 6 p., 2000408.

    Research output: Contribution to journalArticlepeer-review

  255. Publications content icon
    Published

    Gusset plate connections for naturally buckling braces

    Konstantinos Skalomenos, 1 Aug 2017, In: Journal of Structural Engineering (United States). 143, 8, 10 p., 04017065.

    Research output: Contribution to journalArticlepeer-review

  256. Publications content icon
    Published

    HP Vane Aerodynamics and Heat Transfer in the Presence of Aggressive Inlet Swirl

    Imran Qureshi, 19 Nov 2012, In: Journal of Turbomachinery. 135, 2, 021040.

    Research output: Contribution to journalArticlepeer-review

  257. Publications content icon
    Published

    Hardening response and tempering behaviour of electron beam surface melted Ti-8.5Si alloy

    Hanshan Dong, Xiaoying Li & Thomas Bell, 1 Jan 1999, In: Journal of Alloys and Compounds. 283, 1-2, p. 231-240 10 p.

    Research output: Contribution to journalArticlepeer-review

  258. Publications content icon
    Published
  259. Publications content icon
    Published

    Heat and mass transfer of a fuel droplet evaporating in oscillatory flow

    Mehdi Jangi, 1 Aug 2009, In: International Journal of Heat and Fluid Flow. 30, 4, p. 729-740 12 p.

    Research output: Contribution to journalArticlepeer-review

  260. Publications content icon
    E-pub ahead of print

    Heat partition in edge trimming of fiber reinforced polymer composites

    Farrukh Hafeez, 4 Feb 2020, (E-pub ahead of print) In: Journal of Composite Materials. 17 p.

    Research output: Contribution to journalArticlepeer-review

  261. Publications content icon
    Published
  262. Publications content icon
    Published

    Height-finding for automotive THz radars

    Alex Bystrov, Edward Hoare, Marina Gashinova, Mike Cherniakov, Mar 2019, In: IEEE Transactions on Intelligent Transportation Systems . 20, 3, p. 1170 - 1180

    Research output: Contribution to journalArticlepeer-review

  263. Publications content icon
    Published

    High density micro-pyramids with silicon nanowire array for photovoltaic applications

    Miguel Navarro-Cia, 5 Dec 2014, In: Nanotechnology. 25, 48, 485202.

    Research output: Contribution to journalArticlepeer-review

  264. Publications content icon
    Published

    High performance cutting of advanced aerospace alloys and composite materials

    Leung Soo, 21 Aug 2015, In: CIRP Annals - Manufacturing Technology. 64, 2, p. 557-580 24 p.

    Research output: Contribution to journalArticlepeer-review

  265. Publications content icon
    E-pub ahead of print
  266. Publications content icon
    Published

    How strong is the temperature increase due to a moving dislocation?

    Benat Gurrutxaga Lerma, 1 Mar 2017, In: International Journal of Solids and Structures. 108, p. 263-274 12 p.

    Research output: Contribution to journalArticlepeer-review

  267. Publications content icon
    Published

    How to directly observe Landau levels in driven-dissipative strained honeycomb lattices

    Hannah M Price, 25 Sep 2015, In: 2D Materials. 2, 3, 034015.

    Research output: Contribution to journalArticlepeer-review

  268. Publications content icon
    Published

    Hydrogen, bifilms and mechanical properties of al castings

    William Griffiths, 27 Apr 2014, In: The International Journal of Cast Metals Research. 27, 5, p. 282-287 6 p.

    Research output: Contribution to journalArticlepeer-review

  269. Publications content icon
    E-pub ahead of print

    Hysteretic performance of stainless steel double extended end-plate beam-to-column joints subject to cyclic loading

    Marios Theofanous, Jul 2021, In: Thin-Walled Structures. 164, 16 p., 107787.

    Research output: Contribution to journalArticlepeer-review

  270. Publications content icon
    Published

    IEEE International Conference on Intelligent Rail Transportation [Conference Report]

    Felix Schmid, 20 Jan 2014, In: IEEE Intelligent Transportation Systems Magazine. 6, 1, p. 74-75 2 p., 6717161.

    Research output: Contribution to journalArticlepeer-review

  271. Publications content icon
    Published

    Image processing for measuring damage and delamination in glass reinforced epoxy

    Farrukh Hafeez, 26 Jan 2016, In: Journal of Testing and Evaluation. 44, 2, p. 995-1008 14 p.

    Research output: Contribution to journalArticlepeer-review

  272. Publications content icon
    Published

    Impact of injector tip deposits on gasoline direct injection engine combustion, fuel economy and emissions

    Xiao Ma & Hongming Xu, 15 Mar 2020, In: Applied Energy. 262, 114538.

    Research output: Contribution to journalArticlepeer-review

  273. Publications content icon
    Published
  274. Publications content icon
    Published

    Implementing an integrated meter and sensor system (IMSS) in existing social housing stock

    Rosie Day, 1 Jan 2019, In: Energy and Buildings. 182, p. 274-286 13 p.

    Research output: Contribution to journalArticlepeer-review

  275. Publications content icon
    Published

    Improved scheme of membership function optimisation for fuzzy air-fuel ratio control of GDI engines

    Ji Li, Quan Zhou & Hongming Xu, 1 Jan 2019, In: IET Intelligent Transport Systems. 13, 1, p. 209-217 9 p.

    Research output: Contribution to journalArticlepeer-review

  276. Publications content icon
    Published

    Improving PEM water electrolyser’s performance by magnetic field application

    Neil Rees & Ahmad El-Kharouf, 15 Apr 2020, In: Applied Energy. 264, 8 p., 114721.

    Research output: Contribution to journalArticlepeer-review

  277. Publications content icon
    Published
  278. Publications content icon
    Published
  279. Publications content icon
    Published
  280. Publications content icon
    Published
  281. Publications content icon
    Published
  282. Publications content icon
    Published
  283. Publications content icon
    Published

    Increasing the Regenerative Braking Energy for Railway Vehicles

    Paul Weston, Stuart Hillmansen & Clive Roberts, Dec 2014, In: IEEE Transactions on Intelligent Transportation Systems . 15, 6, p. 2506-2515 10 p.

    Research output: Contribution to journalArticlepeer-review

  284. Publications content icon
    Published
  285. Publications content icon
    Published
  286. Publications content icon
    Published
  287. Publications content icon
    Published
  288. Publications content icon
    Published
  289. Publications content icon
    Published
  290. Publications content icon
    Published
  291. Publications content icon
    Published
  292. Publications content icon
    Published
  293. Publications content icon
    Published
  294. Publications content icon
    Published

    Interfacial instabilities due to immiscible fluid displacement in circular and non-circular microchannels

    Nina Kovalchuk & Mark Simmons, 1 May 2020, In: Experimental Thermal and Fluid Science. 113, p. 1-11 11 p., 110045.

    Research output: Contribution to journalArticlepeer-review

  295. Publications content icon
    Published

    Investigation of Ethanol/metal organic frameworks for low temperature adsorption cooling applications

    Raya Al-Dadah, Saad Mahmoud Mahmoud, Dec 2013, In: Applied Energy. 112, p. 1025-1031 7 p.

    Research output: Contribution to journalArticlepeer-review

  296. Publications content icon
    Published
  297. Publications content icon
    Published

    Investigation of aviation lubricant aging under engine representative conditions

    Simon Blakey, 4 May 2021, In: Tribology Transactions. 64, 3, p. 501-512 12 p.

    Research output: Contribution to journalArticlepeer-review

  298. Publications content icon
    Published

    Investigation of flow boiling heat transfer inside small diameter helically coiled tubes

    Raya Al-Dadah, Saad Mahmoud Mahmoud, 1 Dec 2012, In: International Journal of Refrigeration. 35, 8, p. 2179-2187 9 p.

    Research output: Contribution to journalArticlepeer-review

  299. Publications content icon
    Published
  300. Publications content icon
    Published
  301. Publications content icon
    Published
  302. Publications content icon
    Published

    Investigations on wear and liquid metal corrosion behavior of aluminized IN-RAFMS

    1 Mar 2018, In: Fusion Engineering and Design. 128, p. 204-214 11 p.

    Research output: Contribution to journalArticlepeer-review

  303. Publications content icon
    E-pub ahead of print

    Iterative DC Optimal Power Flow Considering Transmission Network Loss

    Ying Xue & Xiao-Ping Zhang, 9 May 2016, (E-pub ahead of print) In: Electric Power Components and Systems. 44, 9, p. 955-965 11 p.

    Research output: Contribution to journalArticlepeer-review

  304. Publications content icon
    Published

    Kink boundaries and their role in dynamic recrystallisation of a Mg-Zn-Y alloy

    Yu-Lung Chiu, 1 Feb 2019, In: Materials Characterization. 148, p. 233-242 10 p.

    Research output: Contribution to journalArticlepeer-review

  305. Publications content icon
    Accepted/In press

    LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

    Mehdi Jangi, 2020, (Accepted/In press) In: Proceedings of the Combustion Institute.

    Research output: Contribution to journalArticlepeer-review

  306. Publications content icon
    Published

    Large eddy simulation of n-Dodecane spray combustion in a high pressure combustion vessel

    Mehdi Jangi, 1 Oct 2014, In: Applied Energy. 136, p. 373-381 9 p.

    Research output: Contribution to journalArticlepeer-review

  307. Publications content icon
    Published
  308. Publications content icon
    Accepted/In press
  309. Publications content icon
    E-pub ahead of print

    Laser powder bed fusion in high-pressure atmospheres

    Mark Ward, Moataz Attallah, 7 Aug 2018, (E-pub ahead of print) In: The International Journal of Advanced Manufacturing Technology. 13 p.

    Research output: Contribution to journalArticlepeer-review

  310. Publications content icon
    Published
  311. Publications content icon
    Published
  312. Publications content icon
    Published

    Lift-off and stabilization of n-heptane combustion in a diesel engine with a multiple-nozzle injection

    Mehdi Jangi, 11 Jan 2013, In: Proceedings of the Combustion Institute. 34, 2, p. 3031-3038 8 p.

    Research output: Contribution to journalArticlepeer-review

  313. Publications content icon
    Accepted/In press
  314. Publications content icon
    Published

    Liquid air energy storage flexibly coupled with LNG regasification for improving air liquefaction

    Xiaohui She, Yongliang Li & Yulong Ding, 15 Sep 2019, In: Applied Energy. 250, p. 1190-1201 12 p.

    Research output: Contribution to journalArticlepeer-review

  315. Publications content icon
    Published

    Local description of foam flow, deformation and pressure drop in narrow constricted channels

    Mandar Badve & Mostafa Barigou, Jul 2020, In: International Journal of Multiphase Flow. 128, 13 p., 103279.

    Research output: Contribution to journalArticlepeer-review

  316. Publications content icon
    Published

    Low grade heat driven adsorption system for cooling and power generation with small-scale radial inflow turbine

    Raya Al-Dadah & Saad Mahmoud Mahmoud, 1 Dec 2016, In: Applied Energy. 183, p. 1302-1316 15 p.

    Research output: Contribution to journalArticlepeer-review

  317. Publications content icon
    Published

    Machine learning aided identification of train weights from railway sleeper vibration

    Sakdirat Kaewunruen, 1 Mar 2021, In: Insight - Non-Destructive Testing and Condition Monitoring. 63, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticlepeer-review

  318. Publications content icon
    Published

    Machine learning of electro-hydraulic motor dynamics

    Luca Baronti, Marco Castellani & Duc Pham, Jan 2020, In: SN Applied Sciences. 2, 12 p., 130.

    Research output: Contribution to journalArticlepeer-review

  319. Publications content icon
    Published

    Materials for hydrogen-based energy storage – past, recent progress and future outlook

    & 18 others, , Joshua Makepeace, 25 Jun 2020, In: Journal of Alloys and Compounds. 827, 39 p., 153548.

    Research output: Contribution to journalArticlepeer-review

  320. Publications content icon
    Published

    Materials testing for finite element tire model

    Xiaoguang Yang, Remi Olatunbosun, 4 Dec 2010, In: SAE International Journal of Materials Manufacture. 3, 1, p. 211-220 10 p.

    Research output: Contribution to journalArticlepeer-review

  321. Publications content icon
    Published
  322. Publications content icon
    Published
  323. Publications content icon
    E-pub ahead of print
  324. Publications content icon
    Published
  325. Publications content icon
    Published
  326. Publications content icon
    E-pub ahead of print
  327. Publications content icon
    E-pub ahead of print
  328. Publications content icon
    Published

    Merging toughness and oxidation resistance in a light ZrB2 composite

    Vinu Venkatachalam, Jon Binner, 5 Dec 2019, In: Materials and Design. 183, p. 1-12 12 p., 108078.

    Research output: Contribution to journalArticlepeer-review

  329. Publications content icon
    Published

    Metal-organic framework materials for adsorption heat pumps

    Raya Al-Dadah, Saad Mahmoud Mahmoud, 1 Jan 2020, In: Energy. 190, 16 p., 116356.

    Research output: Contribution to journalArticlepeer-review

  330. Publications content icon
    Published
  331. Publications content icon
    Published

    Microgravity experiments of single droplet combustion in oscillatory flow at elevated pressure

    Mehdi Jangi, 16 Mar 2009, In: Proceedings of the Combustion Institute. 32, 2, p. 2171-2178 8 p.

    Research output: Contribution to journalArticlepeer-review

  332. Publications content icon
    Published
  333. Publications content icon
    Published
  334. Publications content icon
    Published

    Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition

    Chunlei Qiu & Moataz Attallah, 15 Sep 2016, In: Materials Letters. 179, p. 104-108 5 p.

    Research output: Contribution to journalArticlepeer-review

  335. Publications content icon
    E-pub ahead of print

    Microstructural design of printed graphite electrodes for lithium-ion batteries

    Dominika Gastol, Carl Reynolds & Emma Kendrick, Jul 2021, In: Materials and Design. 205, 13 p., 109720.

    Research output: Contribution to journalArticlepeer-review

  336. Publications content icon
    Published

    Microstructural evolution of Alloy 709 during aging

    Rengen Ding, Hangyue Li, Suyang Yu & Paul Bowen, Aug 2019, In: Materials Characterization. 154, p. 400-423 24 p.

    Research output: Contribution to journalArticlepeer-review

  337. Publications content icon
    Published

    Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles

    Sandy Knowles, 5 Dec 2014, In: Journal of Alloys and Compounds. 615, S1, p. S401-S405 5 p.

    Research output: Contribution to journalArticlepeer-review

  338. Publications content icon
    Published

    Microstructure and microhardness of Ti6246 linear friction weld

    Yu-Lung Chiu, Hangyue Li & Paul Bowen, 1 Feb 2013, In: Materials Science and Engineering A. 562, p. 17-24 8 p.

    Research output: Contribution to journalArticlepeer-review

  339. Publications content icon
    Published
  340. Publications content icon
    E-pub ahead of print
  341. Publications content icon
    Published

    Model-based condition monitoring at the wheel-rail interface

    Roger Dixon, 16 Sep 2008, In: Vehicle System Dynamics. 46, SUPPL.1, p. 415-430 16 p.

    Research output: Contribution to journalArticlepeer-review

  342. Publications content icon
    Published
  343. Publications content icon
    Published
  344. Publications content icon
    Published

    Modelling and control of a high redundancy actuator

    Roger Dixon, 1 Feb 2010, In: Mechatronics. 20, 1, p. 102-112 11 p.

    Research output: Contribution to journalArticlepeer-review

  345. Publications content icon
    Published

    Modelling the variation of suction pressure during caisson installation in sand using FLAC3D

    Asaad Faramarzi, 3 Oct 2017, In: Ships and Offshore Structures. 12, 7, p. 893-899 7 p.

    Research output: Contribution to journalArticlepeer-review

  346. Publications content icon
    Published

    Modelling wind fields and debris flight in tornadoes

    Christopher Baker & Mark Sterling, 1 Sep 2017, In: Journal of Wind Engineering and Industrial Aerodynamics. 168, p. 312-321 10 p.

    Research output: Contribution to journalArticlepeer-review

  347. Publications content icon
    Published

    Models for estimation of creep forces in the wheel/rail contact under varying adhesion levels

    Roger Dixon, 7 Apr 2014, In: Vehicle System Dynamics. 52, Supplement 1, p. 370-386 17 p.

    Research output: Contribution to journalArticlepeer-review

  348. Publications content icon
    Published

    Morphology and shear viscosity of aqueous two-phase biopolymer-surfactant mixtures

    Fotis Spyropoulos, Ian Norton & Andrzej Pacek, 27 Aug 2007, In: Journal of Rheology. 51, 5, p. 867-881 15 p.

    Research output: Contribution to journalArticlepeer-review

  349. Publications content icon
    Published
  350. Publications content icon
    Published

    Mould filling: The critical ingate velocity for aluminium and magnesium alloy castings

    William Griffiths, Oct 2004, In: Foundry Trade Journal. 178, 3618, p. 344-348 5 p.

    Research output: Contribution to journalArticlepeer-review

  351. Publications content icon
    Published
  352. Publications content icon
    Published

    Multi-point forming using mesh-type elastic cushion: modelling and experimentation

    Duc Pham, Hany Hassanin & Khamis Essa, 1 Aug 2019, In: The International Journal of Advanced Manufacturing Technology. 103, 5-8, p. 2079–2090 12 p.

    Research output: Contribution to journalArticlepeer-review

  353. Publications content icon
    Published

    Multi-step reinforcement learning for model-free predictive energy management of an electrified off-highway vehicle

    Quan Zhou, Ji Li, Bin Shuai, Hongming Xu, 1 Dec 2019, In: Applied Energy. 255, 12 p., 113755.

    Research output: Contribution to journalArticlepeer-review

  354. Publications content icon
    Published
  355. Publications content icon
    Published

    Multiresonant broadband optical antennas as efficient tunable nanosources of second harmonic light

    Miguel Navarro-Cia, 12 Sep 2012, In: Nano Letters. 12, 9, p. 4997-5002 6 p.

    Research output: Contribution to journalArticlepeer-review

  356. Publications content icon
    Published
  357. Publications content icon
    Published

    NEW ELECTRO-HYDRAULIC TRIAXIAL TYRE TEST FACILITY FOR LOW-FREQUENCY ROLLING TYRE DYNAMICS.

    Remi Olatunbosun, 1 Jan 1988, In: International Journal of Vehicle Design. 9, 2, p. 242-251 10 p.

    Research output: Contribution to journalArticlepeer-review

  358. Publications content icon
    Published
  359. Publications content icon
    Published

    New traction motor sizing strategy for an HEV/EV based on an overcurrent-tolerant prediction model

    Hongming Xu, Quan Zhou, Remi Olatunbosun, 1 Jan 2019, In: IET Intelligent Transport Systems. 13, 1, p. 168-174 7 p.

    Research output: Contribution to journalArticlepeer-review

  360. Publications content icon
    Published
  361. Publications content icon
    Published

    Nonlinear buckling instabilities of interspersed railway tracks

    Sakdirat Kaewunruen & Charalampos Baniotopoulos, Jun 2021, In: Computers & Structures. 249, 106516.

    Research output: Contribution to journalArticlepeer-review

  362. Publications content icon
    E-pub ahead of print

    Nonlinear vibration mitigation of a crane's payload using pendulum absorber

    P Alevras, Jul 2021, In: Mechanical Systems and Signal Processing. 156, 20 p., 107558.

    Research output: Contribution to journalArticlepeer-review

  363. Publications content icon
    Published

    Novel high strength titanium-titanium composites produced using field-assisted sintering technology (FAST)

    Sandy Knowles, 15 Jan 2019, In: Scripta Materialia. 159, p. 51-57 7 p.

    Research output: Contribution to journalArticlepeer-review

  364. Publications content icon
    Published

    Novel hybrid manufacturing process of CM247LC and multi-material blisks

    Luke Carter, Nicholas Adkins, Khamis Essa & Moataz Attallah, 1 May 2020, In: Micromachines. 11, 5, 492.

    Research output: Contribution to journalArticlepeer-review

  365. Publications content icon
    Published

    Novel implementation of natural fibro-granular materials as acoustic absorbers

    Charalampos Baniotopoulos, 1 Oct 2018, In: Noise and Vibration Worldwide. 49, 9-10, p. 311-316 6 p.

    Research output: Contribution to journalArticlepeer-review

  366. Publications content icon
    Published

    Novel key parameter for eutectic nitrates based nanofluids selection for concentrating solar power (CSP) system

    Zhu Jiang, M. Elena Navarro & Yulong Ding, 1 Feb 2019, In: Applied Energy. 235, p. 529-542 14 p.

    Research output: Contribution to journalArticlepeer-review

  367. Publications content icon
    Published

    Nucleation mechanism of intra-granular blisters in tungsten exposed to hydrogen plasma

    Yu-Lung Chiu, Oct 2020, In: Scripta Materialia. 187, p. 243-249 7 p.

    Research output: Contribution to journalArticlepeer-review

  368. Publications content icon
    Published

    Nucleation mode particle evolution in a gasoline direct injection engine with/without a three-way catalyst converter

    Haoye Liu, Hongming Xu, Xiao Ma, 1 Feb 2020, In: Applied Energy. 259, 10 p., 114211.

    Research output: Contribution to journalArticlepeer-review

  369. Publications content icon
    Published

    Numerical analysis of deposit effect on nozzle flow and spray characteristics of GDI injectors

    Hongming Xu, 15 Oct 2017, In: Applied Energy. 204, p. 1215-1224 10 p.

    Research output: Contribution to journalArticlepeer-review

  370. Publications content icon
    Published
  371. Publications content icon
    Published
  372. Publications content icon
    Published
  373. Publications content icon
    Published

    Numerical investigation on flashing jet behaviors of single-hole GDI injector

    Hongming Xu, 1 Mar 2019, In: International Journal of Heat and Mass Transfer. 130, p. 50-59 10 p.

    Research output: Contribution to journalArticlepeer-review

  374. Publications content icon
    Published
  375. Publications content icon
    Published

    Numerical simulation of combined adsorption desalination and cooling cycles with integrated evaporator/condenser

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 15 Aug 2016, In: Desalination. 392, p. 14-24 11 p.

    Research output: Contribution to journalArticlepeer-review

  376. Publications content icon
    E-pub ahead of print
  377. Publications content icon
    Published
  378. Publications content icon
    Published
  379. Publications content icon
    Published

    On large eddy simulation of diesel spray for internal combustion engines

    Mehdi Jangi, Jun 2015, In: International Journal of Heat and Fluid Flow. 53, p. 68-80 13 p.

    Research output: Contribution to journalArticlepeer-review

  380. Publications content icon
    Published

    On the Approximation of Two-Dimensional Transient Pipe Flow Using a Modified Wave Propagation Algorithm

    Soroosh Sharifi, 7 Feb 2018, In: Journal of Fluids Engineering. 140, 7, 071402.

    Research output: Contribution to journalArticlepeer-review

  381. Publications content icon
    Published

    On the design of steel lattice telecommunication towers

    Charalampos Baniotopoulos, Aug 2014, In: Journal of Structural Engineering (India). 41, 3, p. 214-226 13 p.

    Research output: Contribution to journalArticlepeer-review

  382. Publications content icon
    Published

    On the dynamics of a nonlinear energy harvester with multiple resonant zones

    P Alevras, 1 May 2018, In: Nonlinear Dynamics. 92, 3, p. 1271-1286 16 p.

    Research output: Contribution to journalArticlepeer-review

  383. Publications content icon
    Published
  384. Publications content icon
    Published
  385. Publications content icon
    Published

    On the transient dynamic antiplane contact problem in the presence of dry friction and slip

    Benat Gurrutxaga Lerma, 1 Oct 2019, In: International Journal of Solids and Structures. 170, p. 142-156 15 p.

    Research output: Contribution to journalArticlepeer-review

  386. Publications content icon
    Published

    Oxygen boost diffusion for the deep-case hardening of titanium alloys

    Hanshan Dong & Xiaoying Li, 31 Mar 2000, In: Materials Science and Engineering A. 280, 2, p. 303-310 8 p.

    Research output: Contribution to journalArticlepeer-review

  387. Publications content icon
    Published

    Parallel monitoring for the next generation of train control systems

    Lei Chen, 1 Feb 2015, In: IEEE Transactions on Intelligent Transportation Systems. 16, 1, p. 330-338 9 p., 6857336.

    Research output: Contribution to journalArticlepeer-review

  388. Publications content icon
    Published

    Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion

    Dawei Wu, 15 Feb 2021, In: Energy. 217, 119357.

    Research output: Contribution to journalArticlepeer-review

  389. Publications content icon
    Published

    Parametric pendulum based wave energy converter

    P Alevras, 15 Jan 2018, In: Mechanical Systems and Signal Processing. 99, p. 504-515 12 p.

    Research output: Contribution to journalArticlepeer-review

  390. Publications content icon
    Published

    Partial Train Speed Trajectory Optimization Using Mixed-Integer Linear Programming

    Paul Weston, 1 Oct 2016, In: IEEE Transactions on Intelligent Transportation Systems. 17, 10, p. 2911-2920 10 p., 7433411.

    Research output: Contribution to journalArticlepeer-review

  391. Publications content icon
    Published
  392. Publications content icon
    Published

    Path-planning of a hybrid parallel robot using stiffness and workspace for foot rehabilitation

    Mozafar Saadat, 1 Jan 2018, In: Advances in Mechanical Engineering. 10, 1, p. 1-10 10 p.

    Research output: Contribution to journalArticlepeer-review

  393. Publications content icon
    Published

    Pendulum's rotational motion governed by a stochastic Mathieu equation

    P Alevras, 1 Jan 2013, In: Probabilistic Engineering Mechanics. 31, p. 12-18 7 p.

    Research output: Contribution to journalArticlepeer-review

  394. Publications content icon
    Published
  395. Publications content icon
    E-pub ahead of print
  396. Publications content icon
    Published

    Performance analysis of nonlinear vibration isolator with magneto-rheological damper

    Saikat Dutta, 29 Sep 2014, In: Journal of Sound and Vibration. 333, 20, p. 5097-5114 18 p.

    Research output: Contribution to journalArticlepeer-review

  397. Publications content icon
    Published

    Performance of LiFePO4 batteries in parallel based on connection topology

    Yongliang Li & Yulong Ding, 15 Oct 2019, In: Applied Energy. 252, 113407.

    Research output: Contribution to journalArticlepeer-review

  398. Publications content icon
    Published
  399. Publications content icon
    Published

    Phase equilibria in the Fe-Mo-Ti ternary system at 1000 °C

    Sandy Knowles, 1 Nov 2016, In: International Journal of Refractory Metals and Hard Materials. 60, p. 160-168 9 p.

    Research output: Contribution to journalArticlepeer-review

  400. Publications content icon
    Published
  401. Publications content icon
    Published

    Porosity control in 316L stainless steel using cold and hot isostatic pressing

    Khamis Essa, Parastoo Jamshidi, Ji Zou, Moataz Attallah, 15 Jan 2018, In: Materials and Design. 138, p. 21-29 9 p.

    Research output: Contribution to journalArticlepeer-review

  402. Publications content icon
    Published

    Powder-based laser hybrid additive manufacturing of metals: a review

    Prveen Bidare, Stefan Dimov & Khamis Essa, May 2021, In: The International Journal of Advanced Manufacturing Technology. 114, 1-2, p. 63-96 34 p.

    Research output: Contribution to journalArticlepeer-review

  403. Publications content icon

    Prediction of entrained droplet fraction in co-current annular gas–liquid flow in vertical pipes

    1 Jan 2017, In: Experimental Thermal and Fluid Science. 85, p. 287-304 18 p.

    Research output: Contribution to journalArticlepeer-review

  404. Publications content icon
    E-pub ahead of print

    Prediction of influence of operating conditions and tyre design parameters on tyre cornering characteristics

    Remi Olatunbosun, 5 Mar 2017, (E-pub ahead of print) In: International Journal of Vehicle Performance. 3, 2, p. 127-141 15 p.

    Research output: Contribution to journalArticlepeer-review

  405. Publications content icon
    Published
  406. Publications content icon
    Published
  407. Publications content icon
    Published

    Pressureless sintering of chromium diboride using spark plasma sintering facility

    1 Aug 2016, In: International Journal of Refractory Metals and Hard Materials. 58, p. 165-171 7 p.

    Research output: Contribution to journalArticlepeer-review

  408. Publications content icon
    Published

    Primary carbide transformation in a high performance micro-alloy at 1000 °C

    Minshi Wang, Ian Jones & Yu-Lung Chiu, 15 Apr 2019, In: Journal of Alloys and Compounds. 781, p. 751-760 10 p.

    Research output: Contribution to journalArticlepeer-review

  409. Publications content icon
    Published
  410. Publications content icon
    E-pub ahead of print
  411. Publications content icon
    Published

    Prospects and challenges of graphene in biomedical applications

    Hanene Ali-Boucetta, 24 Apr 2013, In: Advanced Materials. 25, 16, p. 2258-2268 11 p.

    Research output: Contribution to journalArticlepeer-review

  412. Publications content icon
    E-pub ahead of print

    Quality of service in manufacturing networks: a service framework and its implementation

    Duc Pham, 15 Feb 2012, (E-pub ahead of print) In: The International Journal of Advanced Manufacturing Technology. 63, 9-12, p. 1227-1237 11 p.

    Research output: Contribution to journalArticlepeer-review

  413. Publications content icon
    Published

    Radiative decay of the nonlinear oscillations of an adiabatic spherical bubble at small Mach number

    Warren Smith & Qian Wang, 25 Feb 2018, In: Journal of Fluid Mechanics. 837, p. 1-18 18 p.

    Research output: Contribution to journalArticlepeer-review

  414. Publications content icon
    Published
  415. Publications content icon
    Published
  416. Publications content icon
    Published
  417. Publications content icon
    Published
  418. Publications content icon
    Published
  419. Publications content icon
    Published
  420. Publications content icon
    Published

    Real-time monitoring and hydrodynamic scaling of shear exfoliated graphene

    Jason Stafford, 25 Feb 2021, In: 2D Materials. 8, 2, 025029.

    Research output: Contribution to journalArticlepeer-review

  421. Publications content icon
    Published
  422. Publications content icon
    Published
  423. Publications content icon
    Published

    Reusable, robust, and accurate laser-generated photonic nanosensor

    Ali Yetisen, Haider Butt, 11 Jun 2014, In: Nano Letters. 14, 6, p. 3587-3593 7 p.

    Research output: Contribution to journalArticlepeer-review

  424. Publications content icon
    Published

    Road edge recognition using the Stripe Hough Transform from millimeter-wave radar images

    Edward Hoare & Marina Gashinova, 1 Apr 2015, In: IEEE Transactions on Intelligent Transportation Systems . 16, 2, p. 825-833 9 p., 6882781.

    Research output: Contribution to journalArticlepeer-review

  425. Publications content icon
    Published
  426. Publications content icon
    Published

    Role of TiF3 catalyst in the tribological properties of biofuel soot-contaminated liquid paraffin

    Karl Dearn & Hongming Xu, 1 Sep 2014, In: Tribology International. 77, p. 122-131 10 p.

    Research output: Contribution to journalArticlepeer-review

  427. Publications content icon
    Published

    Scratch Testing of Hot-Pressed Monolithic Chromium Diboride (CrB2) and CrB2 + MoSi2 Composite

    1 Oct 2017, In: Journal of Materials Engineering and Performance. 26, 10, p. 5043-5055 13 p.

    Research output: Contribution to journalArticlepeer-review

  428. Publications content icon
    Published

    Secondary phase area fraction determination using SEM-EDS quantitative mapping

    Ian Jones, Sep 2020, In: Materials Characterization. 167, 110506.

    Research output: Contribution to journalArticlepeer-review

  429. Publications content icon
    Published
  430. Publications content icon
    Published
  431. Publications content icon
    Published
  432. Publications content icon
    Published
  433. Publications content icon
    Published
  434. Publications content icon
    Published