Browse Publications

  1. 1988
  2. Publications content icon
    Published

    NEW ELECTRO-HYDRAULIC TRIAXIAL TYRE TEST FACILITY FOR LOW-FREQUENCY ROLLING TYRE DYNAMICS.

    Remi Olatunbosun, 1 Jan 1988, In: International Journal of Vehicle Design. 9, 2, p. 242-251 10 p.

    Research output: Contribution to journalArticlepeer-review

  3. 1992
  4. Publications content icon
    Published
  5. 1993
  6. Publications content icon
    Published

    Correlations of pressure drop in packed beds taking into account the effect of confining wall

    Farid Benyahia, 1 Jan 1993, In: International Journal of Heat and Mass Transfer. 36, 2, p. 536-540 5 p.

    Research output: Contribution to journalArticlepeer-review

  7. Publications content icon
    Published

    The effect of mechanical arrangements on the performance of stirred tank systems

    Farid Benyahia, 1 Jan 1993, Experimental Thermal and Fluid Science. Elsevier, p. 489-495 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  8. 1995
  9. Publications content icon
    Published

    Synthesis of refractory metal carbide powders via microwave carbothermal reduction

    Jon Binner, 1995, In: International Journal of Refractory Metals and Hard Materials. 13, 6, p. 353-358 6 p.

    Research output: Contribution to journalArticlepeer-review

  10. 1996
  11. Publications content icon
    Published
  12. 1997
  13. Publications content icon
    Published

    Virtual reality

    Bob Stone, 1 Dec 1997, In: Engineering: for innovators in technology, manufacturing and management. 238, 6, 1 p.

    Research output: Contribution to journalArticlepeer-review

  14. 1999
  15. Publications content icon
    Published

    Effect of fibre reinforcement on the friction and wear of polyamide 66 under dry rolling-sliding contact

    Stephen Kukureka, 1 Jan 1999, In: Tribology International. 32, 2, p. 107-116 10 p.

    Research output: Contribution to journalArticlepeer-review

  16. Publications content icon
    Published

    Hardening response and tempering behaviour of electron beam surface melted Ti-8.5Si alloy

    Hanshan Dong, Xiaoying Li & Thomas Bell, 1 Jan 1999, In: Journal of Alloys and Compounds. 283, 1-2, p. 231-240 10 p.

    Research output: Contribution to journalArticlepeer-review

  17. Publications content icon
    Published

    Structural characteristics of low temperature plasma carburised austenitic stainless steel

    Yong Sun, Xiaoying Li & Thomas Bell, Oct 1999, In: Materials Science and Technology. 15, 10, p. 1171-1178 8 p.

    Research output: Contribution to journalArticlepeer-review

  18. Publications content icon
    Published

    X-ray diffraction characterisation of low temperature plasma nitrided austenitic stainless steels

    Yong Sun, Xiaoying Li & Thomas Bell, 1 Oct 1999, In: Journal of Materials Science. 34, 19, p. 4793-4802 10 p.

    Research output: Contribution to journalArticlepeer-review

  19. 2000
  20. Publications content icon
    Published

    Surface topography and wear mechanisms in polyamide 66 and its composites

    Stephen Kukureka, Christopher Hooke, 1 Jan 2000, In: Journal of Materials Science. 35, 5, p. 1269-1281 13 p.

    Research output: Contribution to journalArticlepeer-review

  21. Publications content icon
    Published
  22. Publications content icon
    Published

    Oxygen boost diffusion for the deep-case hardening of titanium alloys

    Hanshan Dong & Xiaoying Li, 31 Mar 2000, In: Materials Science and Engineering A. 280, 2, p. 303-310 8 p.

    Research output: Contribution to journalArticlepeer-review

  23. Publications content icon
    Published

    Evaluation of damping and elastic properties of composites and composite structures by the resonance technique

    Stephen Kukureka, 1 Aug 2000, In: Journal of Materials Science. 35, 15, p. 3785-3792 8 p.

    Research output: Contribution to journalArticlepeer-review

  24. 2001
  25. Publications content icon
    Published
  26. 2002
  27. Publications content icon
    Published
  28. Publications content icon
    Published
  29. 2003
  30. Publications content icon
    Published

    Modelling of the potential for oxide film entrainment in light metal alloy castings

    William Griffiths, 2003, Modeling of Casting, Welding and Advanced Solidification Processes. Stefanescu, DM., Warren, J. A., Jolly, M. R., Krane, M. J. M., Stefanescu, D. M., Warren, J. A., Jolly, M. R. & Krane, M. J. M. (eds.). p. 415-422 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  31. Publications content icon
    Published

    Hydrogenation properties of nanocrystalline Mg- and Mg2Ni-based compounds modified with platinum group metals (PGMs)

    Allan Walton, 11 Aug 2003, In: Journal of Alloys and Compounds. 356-357, p. 598-602 5 p.

    Research output: Contribution to journalConference articlepeer-review

  32. Publications content icon
    Published

    Disorderly conduct in Bi2Ln2Ti3O 12 Aurivillius phases (Ln = La, Pr, Nd, Sm)

    Joseph Hriljac, 10 Nov 2003, In: Materials Research Society Symposium - Proceedings. 755, p. 335-340 6 p.

    Research output: Contribution to journalConference articlepeer-review

  33. 2004
  34. Publications content icon
    Published

    Mechanically Induced Phase Transformation of α- and β-Tricalcium Phosphate

    Jake Barralet, Liam Grover, 9 Jan 2004, In: Key Engineering Materials. 254-256, p. 277-280 4 p.

    Research output: Contribution to journalConference articlepeer-review

  35. Publications content icon
    Published

    Temperature Dependence of Dynamic Modulus and Damping in Composites and Optical Telecommunication Cables Tested by the Vibration Resonance Technique

    Stephen Kukureka, 1 Mar 2004, Materials Evaluation, 62, 3, p. 376-381 6 p.

    Research output: Contribution to specialist publicationArticle

  36. Publications content icon
    Published

    Mould filling: The critical ingate velocity for aluminium and magnesium alloy castings

    William Griffiths, Oct 2004, In: Foundry Trade Journal. 178, 3618, p. 344-348 5 p.

    Research output: Contribution to journalArticlepeer-review

  37. Publications content icon
    Published
  38. 2005
  39. Publications content icon
    Published
  40. 2006
  41. Publications content icon
    Published

    Observations of intermetallic compound formation of hot dip aluminized steel

    KeeHyun Park, 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 2 ed. Trans Tech Publications Ltd, p. 1871-1876 6 p. (Materials Science Forum; vol. 519-521, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Publications content icon
    Published

    The effect of the die coating on fluidity in the gravity die casting of aluminium

    William Griffiths, Mar 2006, In: Foundry Trade Journal. 180, 3632, p. 61-64 4 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published
  44. Publications content icon
    Published

    Silver zeolites: Iodide occlusion and conversion to sodalite - A potential 129I waste form?

    Joseph Hriljac, 24 Jul 2006, 29th International Symposium on the Scientific Basis for Nuclear Waste Management XXIX. Vol. 932. p. 775-782 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Publications content icon
    Published

    Study of double oxide film defect behaviour in a quiescent aluminium melt

    William Griffiths, Nov 2006, In: Foundry Trade Journal. 180, 3639, p. 296-299 4 p.

    Research output: Contribution to journalArticlepeer-review

  46. Publications content icon
    Published
  47. 2007
  48. Publications content icon
    Published

    Soil electromagnetic mapping for enhanced GPR utility location

    Chris Rogers, Nicole Metje & David Chapman, 2007, International Society for Trenchless Technology - 25th No-Dig International Conference and Exhibition, Roma 07: Mediterranean No-Dig 2007. p. 44-55 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Publications content icon
    Published

    TCDD celebrates as high speed line nears completion

    Felix Schmid, 1 Feb 2007, Railway Gazette International, 163, 2, p. 72-73 2 p.

    Research output: Contribution to specialist publicationArticle

  50. Publications content icon
    Published

    Wicking of liquid polystyrene degradation products into the pattern coating in the lost foam casting process

    William Griffiths, Mar 2007, In: Foundry Trade Journal. 180, 3642, p. 62-65 4 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published

    Morphology and shear viscosity of aqueous two-phase biopolymer-surfactant mixtures

    Fotis Spyropoulos, Ian Norton & Andrzej Pacek, 27 Aug 2007, In: Journal of Rheology. 51, 5, p. 867-881 15 p.

    Research output: Contribution to journalArticlepeer-review

  52. Publications content icon
    Published

    COBBOOM: The Continental Breakup and Birth of Oceans Mission

    Tim Reston, 1 Sep 2007, In: Scientific Drilling. 5, p. 13-25 13 p.

    Research output: Contribution to journalArticlepeer-review

  53. 2008
  54. Publications content icon
    Published

    Model-based condition monitoring at the wheel-rail interface

    Roger Dixon, 16 Sep 2008, In: Vehicle System Dynamics. 46, SUPPL.1, p. 415-430 16 p.

    Research output: Contribution to journalArticlepeer-review

  55. Publications content icon
    Published

    The application of positron emission particle tracking (PEPT) to the study of inclusions in castings

    William Griffiths, David Parker & Marc Hausard, Oct 2008, In: Foundry Trade Journal. 181, 3658, p. 268-271 4 p.

    Research output: Contribution to journalArticlepeer-review

  56. Publications content icon
    Published
  57. Publications content icon
    Published

    Mechanical integrity of hybrid components used in flexible optoelectronic devices

    Stuart Abell & Stephen Kukureka, 1 Dec 2008, Passive and Electromechanical Materials and Integration. p. 121-126 6 p. (Materials Research Society Symposium Proceedings; vol. 1075).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. 2009
  59. Publications content icon
    Published

    Centrifugal casting of complex geometries: Computational modelling and validation experiments

    Dmytro Shevchenko, Nick Humphreys, Paul Withey, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. Cockcroft, S. & Maijer, D. (eds.). The Minerals, Metals and Materials Society, p. 77-84 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Publications content icon
    Published

    Complex free surface flows for mould filling using centrifugal casting

    Nick Humphreys, Nick Green, 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. The Minerals, Metals and Materials Society, p. 459-466 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Publications content icon
    Published

    The mapping the UK underworld project

    Chris Rogers, David Chapman, Alexander Royal & Nicole Metje, 2009, NASTT/ISTT International No-Dig Conference and Show 2009, including the Annual Technical Conference of North American Society for Trenchless Technology, No-Dig 2009. North American Society for Trenchless Technology (NASTT), Vol. 2. p. 1010-1019 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  62. Publications content icon
    Published

    Time-frequency domain incipient fault detection with application to an aviation fuel system

    Simon Blakey, 2009, 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009. British Institute of Non-Destructive Testing, p. 764-775 12 p. (6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Publications content icon
    Published

    Microgravity experiments of single droplet combustion in oscillatory flow at elevated pressure

    Mehdi Jangi, 16 Mar 2009, In: Proceedings of the Combustion Institute. 32, 2, p. 2171-2178 8 p.

    Research output: Contribution to journalArticlepeer-review

  64. Publications content icon
    Published

    Developments in hot-streak simulators for turbine testing

    Imran Qureshi, 1 Jul 2009, In: Journal of Turbomachinery. 131, 3, 031009.

    Research output: Contribution to journalArticlepeer-review

  65. Publications content icon
    Published

    Heat and mass transfer of a fuel droplet evaporating in oscillatory flow

    Mehdi Jangi, 1 Aug 2009, In: International Journal of Heat and Fluid Flow. 30, 4, p. 729-740 12 p.

    Research output: Contribution to journalArticlepeer-review

  66. Publications content icon
    Published

    Variation-based cracked laminate analysis revisited and fundamentally extended

    Farrukh Hafeez, 1 Oct 2009, In: International Journal of Solids and Structures. 46, 20, p. 3505-3515 11 p.

    Research output: Contribution to journalArticlepeer-review

  67. Publications content icon
    Published

    Squeezability. Part 1: A pressing issue

    Simon Blakey, Nov 2009, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 223, 11, p. 2615-2625 11 p.

    Research output: Contribution to journalArticlepeer-review

  68. Publications content icon
    Published

    3D numerical simulation and PEPT experimental investigation of pressurized gas-solid fluidized bed hydrodynamic

    Andy Ingram, 1 Dec 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART C ed. p. 1833-1842 10 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Publications content icon
    Published

    Microstructure-property development in friction stir welds of Al-Mg alloys

    Moataz Attallah & Martin Strangwood, 1 Dec 2009, ASM Proceedings of the International Conference: Trends in Welding Research. p. 358-363 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  70. 2010
  71. Publications content icon
    Published

    Adaptive control of a macro/micro bilateral teleoperation system under variable time delay

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 529-534 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Publications content icon
    Published

    Development and characterization of quasi-optical mesh filters and metastructures for subterahertz and terahertz applications

    Miguel Navarro-Cia, 2010, Key Engineering Materials. Vol. 437. p. 276-280 5 p. (Key Engineering Materials; vol. 437).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Publications content icon
    Published

    Mapping the underworld: Location phase II-latest developments

    Alexander Royal, Philip Atkins, David Chapman, Giulio Curioni, Kae Foo, Nicole Metje, 2010, 28th International No-Dig Conference and Exhibition 2010, NO-DIG 2010. p. 111-120 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  74. Publications content icon
    Published

    Observer-based robust control with adaptive perturbation estimation for a piezoelectric actuator

    Mozafar Saadat, 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 497-505 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Publications content icon
    Published

    Understanding the Directional dependence of intergranular corrosion in aluminium alloys

    Alison Davenport, 2010, Materials Science Forum. Vol. 654-656. p. 946-949 4 p. (Materials Science Forum; vol. 654-656).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Publications content icon
    Published

    Feature recognition & tool path generation for 5 axis step-nc machining of free form / irregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1235-1236 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Publications content icon
    Published

    Integration of cad/ tool path data for 5-axis step-nc machining of free form / irrregular contoured surfaces

    Arivazhagan Anbalagan, 1 Jan 2010, Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, p. 1233-1234 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. Publications content icon
    Published

    Modelling and control of a high redundancy actuator

    Roger Dixon, 1 Feb 2010, In: Mechatronics. 20, 1, p. 102-112 11 p.

    Research output: Contribution to journalArticlepeer-review

  79. Publications content icon
    Published

    Materials testing for finite element tire model

    Xiaoguang Yang, Remi Olatunbosun, 4 Dec 2010, In: SAE International Journal of Materials Manufacture. 3, 1, p. 211-220 10 p.

    Research output: Contribution to journalArticlepeer-review

  80. 2011
  81. Publications content icon
    Published

    Aviation gas turbine alternative fuels: A review

    Simon Blakey, 2011, In: Proceedings of the Combustion Institute. 33, 2, p. 2863-2885 23 p.

    Research output: Contribution to journalArticlepeer-review

  82. Publications content icon
    Published
  83. Publications content icon
    Published

    Preface

    Charalampos Baniotopoulos, 1 Jan 2011, In: International Centre for Mechanical Sciences. Courses and Lectures. 531

    Research output: Contribution to journalEditorialpeer-review

  84. Publications content icon
    Published

    The effect of surface roughness and emissivity on radiator output

    Simon Blakey, Feb 2011, In: Energy and Buildings. 43, 2-3, p. 400-406 7 p.

    Research output: Contribution to journalArticlepeer-review

  85. Publications content icon
    Published
  86. Publications content icon
    Published
  87. Publications content icon
    Published

    The mechanical behaviour of an ultrafine grained Ti-47Al-2Cr (at%) alloy in tension and compression and at different temperatures

    25 May 2011, In: Materials Science and Engineering A. 528, 13-14, p. 4592-4599 8 p.

    Research output: Contribution to journalArticlepeer-review

  88. Publications content icon
    Published

    Analysis on the effect of a nonuniform inlet profile on heat transfer and fluid flow in turbine stages

    Imran Qureshi, 26 May 2011, In: Journal of Turbomachinery. 134, 1, 011012.

    Research output: Contribution to journalArticlepeer-review

  89. Publications content icon
    Published
  90. Publications content icon
    Published
  91. Publications content icon
    Published

    Systems approach for condition management design: JET neutral beam system - A fusion case study

    Roger Dixon, 1 Oct 2011, In: Fusion Engineering and Design. 86, 9-11, p. 2766-2769 4 p.

    Research output: Contribution to journalArticlepeer-review

  92. Publications content icon
    Published

    Architectural optimisation of distributed control systems for aero gas turbine engines using genetic algorithms

    Roger Dixon, 1 Dec 2011, 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  93. 2012
  94. Publications content icon
    Published

    A novel predictive maintenance method for wind turbines based on wavelets transforms

    Mayorkinos Papaelias & Mani Entezami, 1 Jan 2012, 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012. British Institute of Non-Destructive Testing, Vol. 1. p. 15-27 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  95. Publications content icon
    Published

    Waste to power

    Andreas Hornung, 1 Feb 2012, TJ, 11, 2, p. 55-64 10 p.

    Research output: Contribution to specialist publicationArticle

  96. Publications content icon
    E-pub ahead of print

    Quality of service in manufacturing networks: a service framework and its implementation

    Duc Pham, 15 Feb 2012, (E-pub ahead of print) In: The International Journal of Advanced Manufacturing Technology. 63, 9-12, p. 1227-1237 11 p.

    Research output: Contribution to journalArticlepeer-review

  97. Publications content icon
    Published

    Can nanotubes make a lens array?

    Haider Butt, 19 Jun 2012, In: Advanced Materials. 24, 23

    Research output: Contribution to journalArticlepeer-review

  98. Publications content icon
    Published
  99. Publications content icon
    Published

    Structural features and gas tightness of EB-PVD 1Ce10ScSZ electrolyte films

    Robert Steinberger-Wilckens, 1 Sep 2012, In: Materials Science - Poland. 30, 3, p. 170-179 10 p.

    Research output: Contribution to journalArticlepeer-review

  100. Publications content icon
    Published

    Effect of aggressive inlet swirl on heat transfer and aerodynamics in an unshrouded transonic hp turbine

    Imran Qureshi, 4 Sep 2012, In: Journal of Turbomachinery. 134, 6, 061023.

    Research output: Contribution to journalArticlepeer-review

  101. Publications content icon
    Published

    Broadband terahertz plasmonic response of touching InSb disks

    S. M. Hanham, 11 Sep 2012, In: Advanced Materials. 24, 35

    Research output: Contribution to journalArticlepeer-review

  102. Publications content icon
    Published

    Multiresonant broadband optical antennas as efficient tunable nanosources of second harmonic light

    Miguel Navarro-Cia, 12 Sep 2012, In: Nano Letters. 12, 9, p. 4997-5002 6 p.

    Research output: Contribution to journalArticlepeer-review

  103. Publications content icon
    Published

    Characterization of hot-steam oxidation tested chromosiliconized heat-resistant austenitic stainless steel

    Xiaoying Li, Hanshan Dong, 5 Oct 2012, In: MATERIALS TRANSACTIONS. 53, 6, p. 1090-1093 4 p.

    Research output: Contribution to journalArticlepeer-review

  104. Publications content icon
    Published

    Determination of the Failure Stresses for Fluid-filled Microcapsules that Rupture Near the Elastic Regime

    Ruben Mercade-Prieto, Jon Preece & Zhibing Zhang, Nov 2012, In: Experimental Mechanics. 52, 9, p. 1435-1445 11 p.

    Research output: Contribution to journalArticlepeer-review

  105. Publications content icon
    Published
  106. Publications content icon
    Published

    HP Vane Aerodynamics and Heat Transfer in the Presence of Aggressive Inlet Swirl

    Imran Qureshi, 19 Nov 2012, In: Journal of Turbomachinery. 135, 2, 021040.

    Research output: Contribution to journalArticlepeer-review

  107. Publications content icon
    Published

    Adhesion estimation at the wheel-rail interface using advanced model-based filtering

    Roger Dixon, 1 Dec 2012, In: Vehicle System Dynamics. 50, 12, p. 1797-1816 20 p.

    Research output: Contribution to journalArticlepeer-review

  108. Publications content icon
    Published
  109. Publications content icon
    Published

    Investigation of flow boiling heat transfer inside small diameter helically coiled tubes

    Raya Al-Dadah, Saad Mahmoud Mahmoud, 1 Dec 2012, In: International Journal of Refrigeration. 35, 8, p. 2179-2187 9 p.

    Research output: Contribution to journalArticlepeer-review

  110. 2013
  111. Publications content icon
    Published

    A model of inclusion behaviour in liquid aluminium

    David Burnard & William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 92-96 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  112. Publications content icon
    Published

    A study of the behaviour of double oxide films in Al alloy melts

    William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 260-265 6 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  113. Publications content icon
    Published

    Characterisation of nano-sized Al-Mn-(Mg) particles in AZ91 and their effect on Mg17Al12 precipitation

    Ian Jones, 2013, In: Journal of Alloys and Compounds. 579, p. 34-38 5 p.

    Research output: Contribution to journalArticlepeer-review

  114. Publications content icon
    Published

    Comparison of oxide thickness of aluminium and the effects of selected alloying additions

    Elizabeth Hinton, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 180-184 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  115. Publications content icon
    Published

    Development of an apparatus for the degradation of aviation gas turbine Lubricants

    Simon Blakey, 2013, In: Tribology Transactions. 56, 2, p. 215-223 9 p.

    Research output: Contribution to journalArticlepeer-review

  116. Publications content icon
    Published
  117. Publications content icon
    Published

    Investigation of the microstructure and bio-corrosion behaviour of Mg-Zn and Mg-Zn-Ca alloys

    Yu Lu, Yu-Lung Chiu & Ian Jones, 2013, Materials Science Forum. Vol. 765. p. 788-792 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  118. Publications content icon
    Published

    Modelling of the effects of entrainment defects on mechanical properties in a cast Al-Si-Mg alloy

    Yang Yue, William Griffiths, 2013, Materials Science Forum. Vol. 765. p. 225-229 5 p. (Materials Science Forum; vol. 765).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  119. Publications content icon
    Published

    Sol-gel preparation of HAp-coated silica macrospheres from water glass and their protein adsorption

    Artemis Stamboulis, 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 637-640 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  120. Publications content icon
    Published

    Stochastic dynamics of a parametrically base excited rotating pendulum

    P Alevras, 2013, In: Procedia IUTAM. 6, p. 160-168 9 p.

    Research output: Contribution to journalConference articlepeer-review

  121. Publications content icon
    Published

    The effect of hydrogen on porosity formation during electron beam welding of titanium alloys

    Jianglin Huang, Richard Turner, Jean-Christophe Gebelin, Nils Warnken, Martin Strangwood & Roger Reed, 2013, ASM Proceedings of the International Conference: Trends in Welding Research. DebRoy, T., David, S. A., DuPont, J., Koseki, T. & Bhadeshia, H. K. (eds.). ASM International, p. 868-875 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Previous 1 2 3 4 5 6 Next