Browse Publications

  1. Publications content icon
    Published

    A comparison of the sensory and rheological properties of molecular and particulate forms of xanthan gum

    Bettina Wolf & , Mar 2014, In: Food Hydrocolloids. 35, p. 85-90 6 p.

    Research output: Contribution to journalArticlepeer-review

  2. Publications content icon
    E-pub ahead of print

    In-situ microwave-assisted catalytic upgrading of heavy oil: Experimental validation and effect of catalyst pore structure on activity

    Abarasi Hart, Joe Wood, & , 22 Oct 2020, (E-pub ahead of print) In: Chemical Engineering Journal. 127420.

    Research output: Contribution to journalArticlepeer-review

  3. Publications content icon
    E-pub ahead of print

    Optical microring resonator based corrosion sensing

    Rajib Ahmed, , Ali Yetisen, , & Haider Butt, 13 Jun 2016, (E-pub ahead of print) In: RSC Advances. 6, 61, p. 56127-56133 7 p.

    Research output: Contribution to journalArticlepeer-review

  4. Publications content icon
    Published

    Supercritical water oxidation as the next generation in Hazardous Waste treatment

    Bushra Al-Duri, & Iain Kings, 1 Jan 2013, Environmental Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future. AIChE, 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Publications content icon
    Published

    Holographic direct pulsed laser writing of two-dimensional nanostructures

    Bader Alqattan, Haider Butt, Aydin Sabouri, Ali Yetisen, Rajib Ahmed & Nasim Mahmoodi, 2016, In: RSC Advances. 6, 112, p. 111269-111275 7 p.

    Research output: Contribution to journalArticlepeer-review

  6. Publications content icon
    Published

    Effect of moderate DC electric field on formation of surfactant-laden drops

    Federico Alberini, Mark Simmons & Nina Kovalchuk, May 2020, In: Chemical Engineering Research and Design. 157, p. 133-141 9 p.

    Research output: Contribution to journalArticlepeer-review

  7. Publications content icon
    Published

    Quantitative Measurements of the Critical Impeller Speed for Solid-Liquid Suspensions

    Federico Alberini, Aug 2019, In: Chemical Engineering & Technology. 42, 8, p. 1643-1653 11 p.

    Research output: Contribution to journalArticlepeer-review

  8. Publications content icon
    Published

    Investigation of surface deposition in a simulated fuel injector feed arm with sudden expansion/contraction

    Simon Blakey, , & , 15 Dec 2016, In: Fuel. 186, p. 534-543 10 p.

    Research output: Contribution to journalArticlepeer-review

  9. Publications content icon
    Published

    Effect of Reactive Sulfur Removal by Activated Carbon on Aviation Fuel Thermal Stability

    Simon Blakey & , 18 Jun 2020, In: Energy and Fuels. 34, 6, p. 6780-6790 11 p.

    Research output: Contribution to journalArticlepeer-review

  10. Publications content icon
    Published

    Construction of a reduced chemical kinetic mechanism for autoxidation of n-paraffinic solvent – A model for aviation fuel

    Simon Blakey & , 15 Jun 2021, In: Fuel. 294, 9 p., 120170.

    Research output: Contribution to journalArticlepeer-review

  11. Publications content icon
    Published
  12. Publications content icon
    Published

    Influence of water model and nanotube rigidity on the density of water in carbon nanotubes

    Alessio Alexiadis & , May 2008, In: Chemical Engineering Science. 63, 10, p. 2793-2797 5 p.

    Research output: Contribution to journalArticlepeer-review

  13. Publications content icon
    Published

    The density of water in carbon nanotubes

    Alessio Alexiadis & , Apr 2008, In: Chemical Engineering Science. 63, 8, p. 2047-2056 10 p.

    Research output: Contribution to journalArticlepeer-review

  14. Publications content icon
    Published

    Self-diffusivity, hydrogen bonding and density of different water models in carbon nanotubes

    Alessio Alexiadis & , Jun 2008, In: Molecular Simulation. 34, 7, p. 671-678 8 p.

    Research output: Contribution to journalArticlepeer-review

  15. Publications content icon
    Published

    Design guidelines for fixed-bed photocatalytic reactors

    Alessio Alexiadis & , Apr 2005, In: Chemical Engineering and Processing. 44, 4, p. 453-459 7 p.

    Research output: Contribution to journalArticlepeer-review

  16. Publications content icon
    Published

    Mathematical modeling of homopolymerization on supported metallocene catalysts

    Alessio Alexiadis, , , , , & , 17 May 2004, In: Macromolecular Materials and Engineering. 289, 5, p. 457-466 10 p.

    Research output: Contribution to journalArticlepeer-review

  17. Publications content icon
    Published

    Reaction kinetics of vanillin hydrodeoxygenation in acidic and nonacidic environments using bimetallic PdRh/Al2O3 catalyst

    Abarasi Hart & Joe Wood, 21 Nov 2019, In: Energy & Fuels. 33, 11, p. 11712-11723 12 p.

    Research output: Contribution to journalArticlepeer-review

  18. Publications content icon
    Published

    Kinetics of vanillin hydrodeoxygenation reaction in an organic solvent using a Pd/C catalyst

    Abarasi Hart & Joe Wood, 21 Aug 2019, In: Industrial & Engineering Chemistry Research. 58, 33, p. 15162-15172 11 p.

    Research output: Contribution to journalArticlepeer-review

  19. Publications content icon

    Prediction of entrained droplet fraction in co-current annular gas–liquid flow in vertical pipes

    1 Jan 2017, In: Experimental Thermal and Fluid Science. 85, p. 287-304 18 p.

    Research output: Contribution to journalArticlepeer-review

  20. Publications content icon
    Published

    Acrylamide-dT: a polymerisable nucleoside for DNA incorporation

    Francia Allabush, Paula Mendes & Jim Tucker, 3 Oct 2019, In: RSC Advances. 9, 54, p. 31511-31516 6 p.

    Research output: Contribution to journalArticlepeer-review

  21. Publications content icon
    E-pub ahead of print
  22. Publications content icon
    Published

    Effectiveness of different transition metal dispersed catalysts for in situ heavy oil upgrading

    Abarasi Hart, Gary Leeke, & Joe Wood, 4 Nov 2015, In: Industrial & Engineering Chemistry Research. 54, 43, p. 10645–10655 11 p.

    Research output: Contribution to journalArticlepeer-review

  23. Publications content icon
    Published

    Modelling, simulation and economical evaluation of dry food manufacture at different production scales

    Estefania Lopez-Quiroga, , Peter Fryer & Serafim Bakalis, 22 Sep 2017, 27th European Symposium on Computer Aided Process Engineering. Espuña, A., Graells, M. & Puigjaner, L. (eds.). Elsevier, p. 787-792 6 p. (Computer Aided Chemical Engineering; vol. 40).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Publications content icon
    Published

    Femtosecond laser directed fabrication of optical diffusers

    Pavel Penchev, Ali Yetisen, Aydin Sabouri, , Stefan Dimov & Haider Butt, 2017, In: RSC Advances. 7, 29, p. 18019-18023 5 p.

    Research output: Contribution to journalArticlepeer-review

  25. Publications content icon
    Published

    A Semi-Automated Workflow for FAIR Maturity Indicators in the Life Sciences

    Iseult Lynch, & , 20 Oct 2020, In: Nanomaterials. 10, 10, p. 1-14 14 p., 2068.

    Research output: Contribution to journalArticlepeer-review

  26. Publications content icon
    Published

    On the permeability of binary packings of spheres

    Farid Benyahia, & , 1 Jan 1992, In: Chemical Engineering & Technology. 15, 1, p. 11-14 4 p.

    Research output: Contribution to journalArticlepeer-review

  27. Publications content icon
    Published

    Food manufacturing & economies of scale: a modelling approach

    Estefania Lopez-Quiroga, Peter Fryer & Serafim Bakalis, 22 Sep 2017, 27th European Symposium on Computer Aided Process Engineering. Espuña, A., Graells, M. & Puigjaner, L. (eds.). Elsevier, p. 913-918 6 p. (Computer Aided Chemical Engineering; vol. 40).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Publications content icon
    Published

    CO2 capture using highly viscous amine blends in nonporous membrane contactors

    Muhammad Awais, & , 1 Mar 2019, In: Chemical Engineering Journal. 359, p. 1581-1591 11 p.

    Research output: Contribution to journalArticlepeer-review

  29. Publications content icon
    Published
  30. Publications content icon
    Published
  31. Publications content icon
    Published

    Reprobing the mechanism of negative thermal expansion in siliceous faujasite

    Joseph Hriljac, 2016, In: RSC Advances. 6, 24, p. 19903-19909 7 p.

    Research output: Contribution to journalArticlepeer-review

  32. Publications content icon
    Published
  33. Publications content icon
    Published

    Modelling and parameter estimation of breakthrough curves for amine-modified activated carbons under pre-combustion carbon capture conditions

    Andy Ingram & Joe Wood, 1 Oct 2019, In: Fuel. 253, p. 1130-1139 10 p.

    Research output: Contribution to journalArticlepeer-review

  34. Publications content icon
    E-pub ahead of print

    Optical glucose sensors based on hexagonally-packed 2.5-dimensional photonic concavities imprinted in phenylboronic acid functionalized hydrogel films

    Ali Yetisen, Umair Hassan & Haider Butt, 23 Nov 2017, (E-pub ahead of print) In: RSC Advances. 7, 85, p. 53916-53924 9 p.

    Research output: Contribution to journalArticlepeer-review

  35. Publications content icon
    Published

    An ester-substituted iridium complex for efficient vacuum-processed organic light-emitting diodes.

    Etienne Baranoff, 17 Jul 2009, In: ChemSusChem. 2, 4, p. 305-308 4 p.

    Research output: Contribution to journalArticlepeer-review

  36. Publications content icon
    Published

    Fluorescent, online monitoring of PLGA degradation for regenerative medicine applications

    Alicia El Haj, 2016, In: RSC Advances. 6, 50, p. 44364-44370 7 p.

    Research output: Contribution to journalArticlepeer-review

  37. Publications content icon
    Published
  38. Publications content icon
    Published

    The effect of near wall hindered diffusion on nanoparticle-electrode impacts: A computational model

    Neil Rees, 8 Feb 2013, In: Journal of Electroanalytical Chemistry. 691, p. 28-34 7 p.

    Research output: Contribution to journalArticlepeer-review

  39. Publications content icon
    E-pub ahead of print
  40. Publications content icon
    Published

    Hydrothermal Liquefaction of Microalgae in a Continuous Stirred-Tank Reactor

    Uschi Hornung, & , 22 Sep 2015, In: Energy and Fuels. 29, 10, p. 6422-6432 11 p.

    Research output: Contribution to journalArticlepeer-review

  41. Publications content icon
    Published

    Osmium Atoms and Os2 Molecules Move Faster on Selenium-Doped Compared to Sulfur-Doped Boronic Graphenic Surfaces

    Andrew Dove, Rachel O'Reilly, , & , 28 Jul 2015, In: Chemistry of Materials. 27, 14, p. 5100-5105 6 p.

    Research output: Contribution to journalArticlepeer-review

  42. Publications content icon
    Published

    Deoxygenation of bio-oil from calcium-rich paper-mill waste

    Hessam Jahangiri, Andreas Hornung & Miloud Ouadi, Jan 2021, In: Chemical Engineering and Technology. 44, 1, p. 194-202 9 p.

    Research output: Contribution to journalArticlepeer-review

  43. Publications content icon
    Published

    Mass transfer studies in pneumatic reactors

    Farid Benyahia, , & , 1 Jan 1996, In: Chemical Engineering and Technology. 19, 5, p. 425-431 7 p.

    Research output: Contribution to journalArticlepeer-review

  44. Publications content icon
    Published

    On the global and local structural properties of packed beds of nonequilateral cylindrical particles

    Farid Benyahia, 1 Jan 1996, In: Particulate Science and Technology. 14, 3, p. 221-237 17 p.

    Research output: Contribution to journalArticlepeer-review

  45. Publications content icon
    Published

    Enhanced voidage correlations for packed beds of various particle shapes and sizes

    Farid Benyahia & , 1 Apr 2005, In: Particulate Science and Technology. 23, 2, p. 169-177 9 p.

    Research output: Contribution to journalArticlepeer-review

  46. Publications content icon
    Published

    Scale effects on hydrodynamic and mass transfer characteristics of external loop airlift reactors

    Farid Benyahia & , 1 Jul 1997, In: Journal of Chemical Technology and Biotechnology. 69, 3, p. 301-308 8 p.

    Research output: Contribution to journalArticlepeer-review

  47. Publications content icon
    Published

    Flowsheeting packages: Reliable or fictitious process models?

    Farid Benyahia, 1 Jan 2000, In: Chemical Engineering Research and Design. 78, 6, p. 840-844 5 p.

    Research output: Contribution to journalArticlepeer-review

  48. Publications content icon
    Published

    Modeling mass and heat transfer in multiphase coffee aroma extraction

    Estefania Lopez-Quiroga, , , , Serafim Bakalis & Peter Fryer, 17 Jun 2020, In: Industrial & Engineering Chemistry Research. 59, 24, p. 11099-11112 14 p.

    Research output: Contribution to journalArticlepeer-review

  49. Publications content icon
    Published

    Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices

    Jong-Eun Hong, , , , Robert Steinberger-Wilckens & , 1 Apr 2020, In: Corrosion Science. 165, 10 p., 108414.

    Research output: Contribution to journalArticlepeer-review

  50. Publications content icon
    Published

    Aviation gas turbine alternative fuels: A review

    Simon Blakey, & , 2011, In: Proceedings of the Combustion Institute. 33, 2, p. 2863-2885 23 p.

    Research output: Contribution to journalArticlepeer-review

  51. Publications content icon
    Published

    Valorisation of rice husks using a TORBED® combustion process

    Rob Sommerville, Neil Rowson, & , 1 May 2017, In: Fuel Processing Technology. 159, p. 247-255 9 p.

    Research output: Contribution to journalArticlepeer-review

  52. Publications content icon
    Published

    CFD-DNS simulation of irregular-shaped particle dissolution

    Hui Cao, , Yongliang Li, & Yulong Ding, Jun 2020, In: Particuology. 50, p. 144-155 12 p.

    Research output: Contribution to journalArticlepeer-review

  53. Publications content icon
    Published

    Chemical control of thermal expansion in cation-exchanged zeolite A

    Joseph Hriljac & Paul Anderson, 25 Feb 2014, In: Chemistry of Materials. 26, 4, p. 1561-1566 6 p.

    Research output: Contribution to journalArticlepeer-review

  54. Publications content icon
    Published

    Design of a Cost-Reduced Flexible Plant for Supercritical Fluid-Assisted Applications

    Valentina Prosapio, Ian Norton & Tom Mills, 21 Jun 2018, In: Chemical Engineering and Technology. 41, 7, p. 1368-1377 10 p.

    Research output: Contribution to journalArticlepeer-review

  55. Publications content icon
    Published

    Acidified/basified gellan gum gels: The role of the structure in drying/rehydration mechanisms

    Valentina Prosapio, Ian Norton & Tom Mills, 1 Sep 2018, In: Food Hydrocolloids. 82, p. 346-354 9 p.

    Research output: Contribution to journalArticlepeer-review

  56. Publications content icon
    Published

    Role of gellan gum microstructure in freeze drying and rehydration mechanisms

    Ian Norton & Tom Mills, Feb 2018, In: Food Hydrocolloids. 75, p. 51-61

    Research output: Contribution to journalArticlepeer-review

  57. Publications content icon
    Published

    Metal-Organic Nanosheets Step into the Spotlight

    Neil Champness, 10 May 2018, In: Chem. 4, 5, p. 933-934 2 p.

    Research output: Contribution to journalShort survey

  58. Publications content icon
    Published
  59. Publications content icon
    Published

    Investigation of surface modifications for combating the molten aluminum corrosion of AISI H13 steel

    Xiaoying Li & Hanshan Dong, Sep 2020, In: Corrosion Science. 174, 108836.

    Research output: Contribution to journalArticlepeer-review

  60. Publications content icon
    Published
  61. Publications content icon
    Published
  62. Publications content icon
    Published
  63. Publications content icon
    Published

    Shear rheology and filament stretching behaviour of xanthan gum and carboxymethyl cellulose solution in presence of saliva

    Bettina Wolf, Oct 2014, In: Food Hydrocolloids. 40, p. 71-75 5 p.

    Research output: Contribution to journalArticlepeer-review

  64. Publications content icon
    Published
  65. Publications content icon
    Published
  66. Publications content icon
    Published
  67. Publications content icon
    Published

    Time-resolved X-ray diffraction of phase transformations in high strength nickel-based superalloys

    David Collins, , , & , 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 277-278 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. Publications content icon
    Published

    Susceptibility of Plasma nitrided 17-4 PH to sulfide stress sracking (SSC) in H2S-containing environments

    Brian Connolly, Xiaoying Li, Hanshan Dong, & , 30 Mar 2017, Corrosion Conference and Expo 2017. National Assoc. of Corrosion Engineers International, p. 3528-3542 15 p. (NACE - International Corrosion Conference Series; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Publications content icon
    Published

    Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling

    Mehdi Jangi & , 7 Jan 2014, In: Combustion Theory and Modelling. 18, 1, p. 65-88 24 p.

    Research output: Contribution to journalArticlepeer-review

  70. Publications content icon
    E-pub ahead of print
  71. Publications content icon
    Published

    Bifunktionelle Synthesebausteine durch hydrothermale Verflüssigung von Organosolv-Lignin

    Uschi Hornung, , & , Sep 2016, In: Chemie-Ingenieur-Technik. 88, 9, 1 p.

    Research output: Contribution to journalAbstractpeer-review

  72. Publications content icon
    Published
  73. Publications content icon
    Published
  74. Publications content icon
    Published

    BiKi Life Sciences: A New Suite for Molecular Dynamics and Related Methods in Drug Discovery

    Giovanni Bottegoni, , & , 26 Feb 2018, In: Journal of Chemical Information and Modeling. 58, 2, p. 219-224 6 p.

    Research output: Contribution to journalArticlepeer-review

  75. Publications content icon
    Published

    Effects of contaminants on the mass-transfer characteristics of a two-impinging-streams gas-liquid reactor

    Chiya Savari, 1 Nov 2011, In: Chemical Engineering and Technology. 34, 11, p. 1797-1806 10 p.

    Research output: Contribution to journalArticlepeer-review

  76. Publications content icon
    Published
  77. Publications content icon
    E-pub ahead of print

    Optical scattering from graphene foam for oil imaging/sensing

    Haider Butt, Aydin Sabouri, , & Kyle Jiang, 28 Jul 2016, (E-pub ahead of print) In: RSC Advances. 6, 76, p. 71867-71874

    Research output: Contribution to journalArticlepeer-review

  78. Publications content icon
    Published

    Graphene nanoribbon based plasmonic Fresnel zone plate lenses

    Haider Butt, Kyle Jiang, , , , & Ali Yetisen, 2017, In: RSC Advances. 7, 27, p. 16594-16601 8 p.

    Research output: Contribution to journalArticlepeer-review

  79. Publications content icon
    Published

    Computational modelling of a graphene Fresnel lens on different substrates

    Ali Yetisen, Kyle Jiang & Haider Butt, 2014, In: RSC Advances. 4, 57, p. 30050-30058 9 p.

    Research output: Contribution to journalArticlepeer-review

  80. Publications content icon
    Published

    Droplet deformation and break-up under shear: Hydrocolloid solution vs. suspension of starch granules

    Bettina Wolf & , 1 May 2011, In: Food Hydrocolloids. 25, 3, p. 495-502 8 p.

    Research output: Contribution to journalArticlepeer-review

  81. Publications content icon
    Published

    Effect of high-methoxy pectin on properties of casein-stabilized emulsions

    Edward Pelan, 1 Jan 1998, In: Food Hydrocolloids. 12, 4, p. 425-432 8 p.

    Research output: Contribution to journalArticlepeer-review

  82. Publications content icon
    Published

    High performance boronic acid-containing hydrogel for biocompatible continuous glucose monitoring

    Ali Yetisen, Haider Butt, , & , 24 Aug 2017, In: RSC Advances. 7, 66, p. 41384-41390 7 p.

    Research output: Contribution to journalArticlepeer-review

  83. Publications content icon
    Published

    New insights into the mechanism of nitrite reduction on a platinum electrode

    Paramaconi Rodriguez, 15 Nov 2010, In: Journal of Electroanalytical Chemistry. 649, 1-2, p. 59-68 10 p.

    Research output: Contribution to journalArticlepeer-review

  84. Publications content icon
    Published

    Translating scientific advances in the AOP framework to decision making for nanomaterials

    Iseult Lynch, , , & , 24 Jun 2020, In: Nanomaterials. 10, 6, 1229.

    Research output: Contribution to journalArticlepeer-review

  85. Publications content icon
    Published

    The effect of sugars on agar fluid gels and the stabilisation of their foams

    Tom Mills, Ian Norton & Abigail Norton-Welch, 1 Feb 2019, In: Food Hydrocolloids. 87, p. 371-381 11 p.

    Research output: Contribution to journalArticlepeer-review

  86. Publications content icon
    Published

    Stabilisation of foams by agar gel particles

    Abigail Norton-Welch, Tom Mills & Ian Norton, 1 Dec 2017, In: Food Hydrocolloids. 73, p. 222-228 7 p.

    Research output: Contribution to journalArticlepeer-review

  87. Publications content icon
    Published

    Upscaling of thermo-catalytic reforming process from lab to pilot scale

    Andreas Hornung, 4 Sep 2019, In: Industrial & Engineering Chemistry Research. 58, 35, p. 15853-15862 10 p.

    Research output: Contribution to journalArticlepeer-review

  88. Publications content icon
    Published

    CPO-27(Ni), aluminium fumarate and MIL-101(Cr) MOF materials for adsorption water desalination

    Raya Al-Dadah, Saad Mahmoud Mahmoud, Paul Anderson, & , 16 Mar 2017, In: Desalination. 406, p. 25-36 12 p.

    Research output: Contribution to journalArticlepeer-review

  89. Publications content icon
    Published

    Flow, turbulence and potential droplet break up mechanisms in an in-line Silverson 150/250 high shear mixer

    Federico Alberini, , & Mark Simmons, Feb 2020, In: Chemical Engineering Science: X. 6, p. 1-22 22 p., 100055.

    Research output: Contribution to journalArticlepeer-review

  90. Publications content icon

    Discharge coefficient of high viscosity liquids through nozzles

    May 2019, In: Experimental Thermal and Fluid Science. 103, p. 1-8 8 p.

    Research output: Contribution to journalArticlepeer-review

  91. Publications content icon
    Published

    Volumetric and viscometric properties of a binary mixture of a model diesel compound with a biobased additive

    Jesus Esteban, Tom Simons, Halina Murasiewicz, & Peter Fryer, 2016, Engineering Sciences and Fundamentals 2016 - Core Programming Area at the 2016 AIChE Annual Meeting. AIChE, Vol. 1. p. 365-367 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Publications content icon
    Published

    Penetration of a non-swelling liquid into a tableted porous medium

    Jesus Esteban, Serafim Bakalis, , & Peter Fryer, 1 Jan 2016, Engineering Sciences and Fundamentals 2016 - Core Programming Area at the 2016 AIChE Annual Meeting. AIChE, p. 286-295 10 p. (Engineering Sciences and Fundamentals 2016 - Core Programming Area at the 2016 AIChE Annual Meeting; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  93. Publications content icon
    Published
  94. Publications content icon
  95. Publications content icon
    Published

    Attachment of solid particles to air bubbles in surfactant-free aqueous solutions

    Xianfeng Fan, Zhibing Zhang, & Neil Rowson, Jul 2004, In: Chemical Engineering Science. 59, 13, p. 2639-2645 7 p.

    Research output: Contribution to journalArticlepeer-review

  96. Publications content icon
    Published

    Rational study of DBU salts for the CO2 insertion into epoxides for the synthesis of cyclic carbonates

    Andrew Dove, 17 Jun 2019, In: ACS Sustainable Chemistry & Engineering. 7, 12, p. 10633-10640 8 p.

    Research output: Contribution to journalArticlepeer-review

  97. Publications content icon
    E-pub ahead of print

    Formulation and additive manufacturing of polysaccharide-surfactant hybrid gels as gelatin analogues in food applications

    Tom Mills, Edward Pelan & Azarmidokht Gholamipour Shirazi, 10 May 2021, (E-pub ahead of print) In: Food Hydrocolloids. 120, 9 p., 106881.

    Research output: Contribution to journalArticlepeer-review

  98. Publications content icon
    Published
  99. Publications content icon
    Published

    Modeling lipid raft domains containing a mono-unsaturated phosphatidylethanolamine species

    Giovanni Bottegoni, 15 Apr 2015, In: RSC Advances. 5, 47, p. 37102-37111 10 p.

    Research output: Contribution to journalArticlepeer-review

  100. Publications content icon
    Published

    New Insights into the Structure of Nanoporous Carbons from NMR, Raman, and Pair Distribution Function Analysis

    Phoebe Allan, , , , , , & , 2 Oct 2015, In: Chemistry of Materials. 27, 19, p. 6848-6857 10 p.

    Research output: Contribution to journalArticlepeer-review

  101. Publications content icon
    Published
  102. Publications content icon
    Published

    The effect of mechanical arrangements on the performance of stirred tank systems

    Farid Benyahia, 1 Jan 1993, Experimental Thermal and Fluid Science. Elsevier, p. 489-495 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  103. Publications content icon
    Published

    Can CFD improve the handling of air, gas and gas-liquid mixtures

    Farid Benyahia, 1 Feb 1993, In: Chemical Engineering Progress. 89, 2, p. 21-26 6 p.

    Research output: Contribution to journalArticlepeer-review

  104. Publications content icon
    Published

    Thermodynamic analysis of (bi)sulphate adsorption on a Pt(1 1 1) electrode as a function of pH

    Paramaconi Rodriguez, 1 Oct 2008, In: Electrochimica Acta. 53, 23, p. 6793-6806 14 p.

    Research output: Contribution to journalArticlepeer-review

  105. Publications content icon
    Published

    Thermal energy storage: Challenges and the role of particle technology

    Yongliang Li, , , , , , & Yulong Ding, 18 May 2014, In: Particuology. 15, p. 2-8 7 p.

    Research output: Contribution to journalReview articlepeer-review

  106. Publications content icon
    Published

    Behavior of Supramolecular Assemblies of Radiometal-Filled and Fluorescent Carbon Nanocapsules In Vitro and In Vivo

    John Fossey, , & , 14 Sep 2017, In: Chem. 3, 3, p. 437-460 24 p.

    Research output: Contribution to journalArticlepeer-review

  107. Publications content icon
    Published

    Designing hydrocolloid based food-ink formulations for extrusion 3D printing

    Azarmidokht Gholamipour Shirazi, Ian Norton & Tom Mills, Oct 2019, In: Food Hydrocolloids. 95, p. 161-167 7 p.

    Research output: Contribution to journalArticlepeer-review

  108. Publications content icon
    Published
  109. Publications content icon
    Published

    Diesel flame lift-off stabilization in the presence of laser-ignition: a numerical study

    Mehdi Jangi & , 21 Sep 2015, In: Combustion Theory and Modelling. 19, 6, p. 696-713 18 p.

    Research output: Contribution to journalArticlepeer-review

  110. Publications content icon
    Published

    Large eddy simulation of air entrainment and mixing in reacting and non-reacting diesel sprays

    Mehdi Jangi, , & , 1 Oct 2014, In: Flow, Turbulence and Combustion. 93, 3, p. 385-404 20 p.

    Research output: Contribution to journalArticlepeer-review

  111. Publications content icon
    Published

    Interfacial and emulsifying properties of mealworm protein at the oil/water interface

    Bettina Wolf, 1 Apr 2018, In: Food Hydrocolloids. 77, p. 57-65 9 p.

    Research output: Contribution to journalArticlepeer-review

  112. Publications content icon
    E-pub ahead of print

    Pulsed discharge regeneration of diesel particulate filters

    Jon Binner, , , , , , & , 20 Jan 2013, (E-pub ahead of print) In: Plasma Chemistry and Plasma Processing. 33, 2, p. 467-477 11 p.

    Research output: Contribution to journalArticlepeer-review

  113. Publications content icon
    Published

    Open-source single-particle analysis for super-resolution microscopy with virusmapper

    Jason Mercer & , 9 Apr 2017, In: Journal of Visualized Experiments. 2017, 122, e55471.

    Research output: Contribution to journalArticlepeer-review

  114. Publications content icon
    E-pub ahead of print

    Total Synthesis and Structural Revision of a Mangrove Alkaloid

    Nigel Simpkins & Alan M Jones, 17 Oct 2017, (E-pub ahead of print) In: RSC Advances. 7, 77, p. 48754-48758 5 p.

    Research output: Contribution to journalArticlepeer-review

  115. Publications content icon
    Published
  116. Publications content icon
    Published
  117. Publications content icon
    E-pub ahead of print

    The effect of splitting timing on mixing in a jet with double injections: A Large-Eddy Simulation Study

    Mehdi Jangi & , 24 Apr 2018, (E-pub ahead of print) In: Flow, Turbulence and Combustion. 15 p.

    Research output: Contribution to journalArticlepeer-review

  118. Publications content icon
    Published
  119. Publications content icon
    Published

    Nuclear wastewater decontamination by 3D printed hierarchical zeolite monoliths

    Tzu-Yu Chen, , & Joseph Hriljac, 5 Feb 2020, In: RSC Advances. 10, 10, p. 5766-5776 11 p.

    Research output: Contribution to journalArticlepeer-review

  120. Publications content icon
    Published
  121. Publications content icon
    Published

    Optimization of the CAPRI process for heavy oil upgrading: Effect of hydrogen and guard bed

    Abarasi Hart, Amjad Shah, Gary Leeke, & Joe Wood, 6 Nov 2013, In: Industrial and Engineering Chemistry Research. 52, 44, p. 15394-15406 13 p.

    Research output: Contribution to journalArticlepeer-review

  122. Publications content icon
    Published

    Morpholino-substituted BODIPY species: Synthesis, structure and electrochemical studies

    Neil Champness, 14 Jan 2020, In: Crystals. 10, 1, 36.

    Research output: Contribution to journalArticlepeer-review

  123. Publications content icon
    Published

    Predicting sensory perceptions of thickened solutions based on rheological analysis

    Bettina Wolf, 1 Dec 2016, In: Food Hydrocolloids. 61, p. 221-232 12 p.

    Research output: Contribution to journalArticlepeer-review

  124. Publications content icon
    Published

    Structural, Magnetic, Magnetocaloric, and Magnetostrictive Properties of Pb1-xSrxMnBO4(x = 0, 0.5, and 1.0)

    Minki Jeong, , & Colin Greaves, 8 Dec 2020, In: Chemistry of Materials. 32, 23, p. 10184-10199 16 p.

    Research output: Contribution to journalArticlepeer-review

  125. Publications content icon
    Published

    The electrochemical reduction kinetics of oxygen in dimethylsulfoxide

    Ruba Hendi, , , & Neil Rees, 15 Nov 2018, In: Journal of Electroanalytical Chemistry. 829, p. 16-19 4 p.

    Research output: Contribution to journalArticlepeer-review

  126. Publications content icon
    E-pub ahead of print

    A triphenylene-based small molecule compatibiliser using incompatible pendent chains

    Antoine Herbaut & Etienne Baranoff, 20 Jan 2016, (E-pub ahead of print) In: RSC Advances. 2016, 13, p. 10655-10661 7 p.

    Research output: Contribution to journalArticlepeer-review

  127. Publications content icon
    Published

    The build-up of detergent agglomerates in an auger filler

    Christopher Hewitt, , Richard Greenwood & Andy Ingram, 15 Feb 2019, In: Powder Technology. 344, p. 628-635 8 p.

    Research output: Contribution to journalArticlepeer-review

  128. Publications content icon
    Published

    Large eddy simulation of bluff body flames close to blow-off using an Eulerian stochastic field method

    Mehdi Jangi, & , Jul 2017, In: Combustion and Flame. 181, p. 1-15 15 p.

    Research output: Contribution to journalArticlepeer-review

  129. Publications content icon
    E-pub ahead of print

    Large Eddy Simulation of bluff-body flame approaching blow-off: a sensitivity study

    Mehdi Jangi, , , , , & , 30 Oct 2018, (E-pub ahead of print) In: Combustion Science and Technology. 28 p.

    Research output: Contribution to journalArticlepeer-review

  130. Publications content icon
    Published

    Extrusion process for the manufacture of beta"-alumina solid electrolyte tubes

    Yu Hu, , & Stuart Blackburn, 31 Mar 2017, In: Journal of Ceramic Science and Technology. 8, 1, p. 25-30 6 p.

    Research output: Contribution to journalArticlepeer-review

  131. Publications content icon
    Published

    Structure-based predictions of activity cliffs

    Giovanni Bottegoni, , & , 28 Apr 2015, In: Journal of Chemical Information and Modeling. 55, 5, p. 1062-1076 15 p.

    Research output: Contribution to journalArticlepeer-review

  132. Publications content icon
    Published

    Manufacturing of agarose-based chromatographic adsorbents with controlled pore and particle sizes

    Andrzej Pacek, James Bowen & Zhibing Zhang, 2012, Annual Technical Conference - ANTEC, Conference Proceedings. Vol. 2. p. 1025-1031 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  133. Publications content icon
    Published

    Thermochemical conversion of biomass and upgrading of bio-products to produce fuels and chemicals

    Hessam Jahangiri, , Andreas Hornung & Miloud Ouadi, 12 Apr 2021, Catalysis for Clean Energy and Environmental Sustainability: Biomass Conversion and Green Chemistry - Volume 1. Pant, K. K., Gupta, S. K. & Ahmad, E. (eds.). 1 ed. Springer, Cham, Vol. 1. p. 1-47 47 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  134. Publications content icon
    Published

    Effects of EGR on the structure and emissions of diesel combustion

    Mehdi Jangi, , & , 11 Jan 2013, In: Proceedings of the Combustion Institute. 34, 2, p. 3091-3098 8 p.

    Research output: Contribution to journalArticlepeer-review

  135. Publications content icon
    Published

    Multidimensional chemistry coordinate mapping approach for combustion modelling with finite-rate chemistry

    Mehdi Jangi & , 1 Dec 2012, In: Combustion Theory and Modelling. 16, 6, p. 1109-1132 24 p.

    Research output: Contribution to journalArticlepeer-review

  136. Publications content icon
    Published

    Effects of fuel cetane number on the structure of diesel spray combustion: An accelerated Eulerian stochastic fields method

    Mehdi Jangi, , & , 1 Jan 2015, In: Combustion Theory and Modelling. 19, 5, p. 549-567 19 p.

    Research output: Contribution to journalArticlepeer-review

  137. Publications content icon
    Published
  138. Publications content icon
    Published

    Development of chemistry coordinate mapping approach for turbulent partially premixed combustion

    Mehdi Jangi, & , 1 Mar 2013, In: Flow, Turbulence and Combustion. 90, 2, p. 285-299 15 p.

    Research output: Contribution to journalArticlepeer-review

  139. Publications content icon
    Published

    Large-eddy simulation of methanol pool fires using an accelerated stochastic fields method

    Mehdi Jangi, & , Nov 2016, In: Combustion and Flame. 173, p. 89-98 10 p.

    Research output: Contribution to journalArticlepeer-review

  140. Publications content icon
    Published

    On the validity of quasi-steady assumption in transient droplet combustion

    Mehdi Jangi, , & , 1 Jan 2009, In: Combustion and Flame. 156, 1, p. 99-105 7 p.

    Research output: Contribution to journalArticlepeer-review

  141. Publications content icon
    Published
  142. Publications content icon
    Published
  143. Publications content icon
    Published
  144. Publications content icon
    Published

    Development of partial miscibility in polycarbonate/polypropylene blends via annealing

    Michael Jenkins, Stephen Kukureka & , 28 Aug 2017, In: Journal of Polymer Engineering. 37, 7, p. 707-714 8 p.

    Research output: Contribution to journalArticlepeer-review

  145. Publications content icon
    Published

    Understanding the dechlorination of chlorinated hydrocarbons in the pyrolysis of mixed plastics

    Guozhan Jiang, , , & Gary Leeke, 1 Feb 2021, In: ACS Sustainable Chemistry and Engineering. 9, 4, p. 1576-1589 14 p.

    Research output: Contribution to journalArticlepeer-review

  146. Publications content icon
    Published

    Molten Solar Salt Pyrolysis of Mixed Plastic Waste: Process Simulation and Technoeconomic Evaluation

    Guozhan Jiang, , & Gary Leeke, 18 Jun 2020, In: Energy and Fuels. 34, 6, p. 7397-7409 13 p.

    Research output: Contribution to journalArticlepeer-review

  147. Publications content icon
    Published

    Experimental investigation on the macroscopic and microscopic spray characteristics of dieseline fuel

    Hongming Xu & , 1 Jul 2017, In: Fuel. 199, p. 478-487 10 p.

    Research output: Contribution to journalArticlepeer-review

  148. Publications content icon
    E-pub ahead of print

    Dialling-in new reactivity into the Shono-type anodic oxidation reaction

    Alan M Jones, 4 Nov 2020, (E-pub ahead of print) In: The Chemical Record.

    Research output: Contribution to journalArticlepeer-review

  149. Publications content icon
    Published

    Optimising the quality of safe food: Computational modelling of a continuous sterilisation process

    Peter Fryer, 1 Mar 1999, In: Chemical Engineering Science. 54, 6, p. 717-730 14 p.

    Research output: Contribution to journalArticlepeer-review

  150. Publications content icon
    Published
  151. Publications content icon
    Published
  152. Publications content icon
    Published

    Stabilisation of oil-in-water emulsions with non-chemical modified gelatinised starch

    Bettina Wolf, 1 Aug 2018, In: Food Hydrocolloids. 81, p. 409-418 10 p.

    Research output: Contribution to journalArticlepeer-review

  153. Publications content icon
    Published

    Flexible corner cube retroreflector array for temperature and strain sensing

    Rajib Ahmed, Ali Yetisen & Haider Butt, 16 Feb 2018, In: RSC Advances. 8, 14, p. 7588-7598 11 p.

    Research output: Contribution to journalArticlepeer-review

  154. Publications content icon
    Published

    Thermal and Thermochemical Energy Conversion and Storage

    Zhu Jiang, , , , , Hui Cao, , , , , Yongliang Li, & Yulong Ding, 2020, ACS Symposium Series. Qin, L. & Fan, L-S. (eds.). American Chemical Society, p. 257-301 45 p. (ACS Symposium Series; vol. 1364).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  155. Publications content icon
    Published

    Marangoni phenomena during droplet formation in microfluidics

    Ioannis Kiratzis, Nina Kovalchuk, Mark Simmons & Daniele Vigolo, 2019, 2019 AIChE Annual Meeting. American Institute of Chemical Engineers, (AIChE Annual Meeting, Conference Proceedings; vol. 2019-November).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  156. Publications content icon
    Published
  157. Publications content icon
    Published

    Mixing by asymmetrical drop coalescence in a microfluidic device

    Nina Kovalchuk, , , Daniele Vigolo & Mark Simmons, 2019, 2019 AIChE Annual Meeting. American Institute of Chemical Engineers, (AIChE Annual Meeting, Conference Proceedings; vol. 2019-November).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  158. Publications content icon
    Published

    Effect of surfactant kinetics on spreading of aqueous trisiloxane solutions

    Nina Kovalchuk, , & Mark Simmons, 2019, 2019 AIChE Annual Meeting. American Institute of Chemical Engineers, (AIChE Annual Meeting, Conference Proceedings; vol. 2019-November).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  159. Publications content icon
    Published
  160. Publications content icon
    Published

    Catalytic hydrogenation of short chain carboxylic acids typical of model compound found in bio-oils

    Ahmed Lawal, Abarasi Hart, , & Joe Wood, 15 May 2019, In: Industrial & Engineering Chemistry Research. 58, 19, p. 7998-8008 11 p.

    Research output: Contribution to journalArticlepeer-review

  161. Publications content icon
    E-pub ahead of print

    Reprint of: Microstructural design of aerated food systems by soft-solid materials

    Aris Lazidis, , Fotis Spyropoulos & Ian Norton, 10 Aug 2017, (E-pub ahead of print) In: Food Hydrocolloids.

    Research output: Contribution to journalArticlepeer-review

  162. Publications content icon
    Published

    Prediction of the knock propensity of biogenous fuel gases: Application of the detonation theory to syngas blends

    Andreas Hornung & , 1 May 2020, In: Fuel. 267, 9 p., 117243.

    Research output: Contribution to journalArticlepeer-review

  163. Publications content icon
    Published
  164. Publications content icon
    Published

    Adhesion tension force between mould and pattern wax in investment castings

    Stuart Blackburn & Stewart Welch, Nov 2015, In: Journal of Materials Processing Technology. 225, p. 369-74 6 p.

    Research output: Contribution to journalArticlepeer-review

  165. Publications content icon
    Published
  166. Publications content icon
    Published

    Predicting upper limb discomfort for plastic surgeons wearing loupes based on multi-objective optimization

    Francois-Xavier Li, & , 21 Nov 2017, In: Cogent Engineering. 4, 1, 1398702.

    Research output: Contribution to journalArticlepeer-review

  167. Publications content icon
    E-pub ahead of print

    Solubility of Azoxystrobin and Benflumetol in compressed CO2 - measured by the static precise mass measuring method

    Tiejun Lu, Stuart Blackburn & Gary Leeke, 20 Dec 2018, (E-pub ahead of print) In: Journal of Chemical and Engineering Data. 64, 1, p. 9-15 7 p.

    Research output: Contribution to journalArticlepeer-review

  168. Publications content icon
    Published
  169. Publications content icon
    Published

    PEPT study of particle cycle and residence time distributions in a Wurster fluid bed

    Andy Ingram, , , & , Mar 2015, In: AIChE Journal. 61, 3, p. 756-768 13 p.

    Research output: Contribution to journalArticlepeer-review

  170. Publications content icon
    Published
  171. Publications content icon
    Published
  172. Publications content icon
    Published

    Morphology analysis on multi-jet flash-boiling sprays under wide ambient pressures

    Hongming Xu & , 1 Jan 2018, In: Fuel. 211, p. 38-47 10 p.

    Research output: Contribution to journalArticlepeer-review

  173. Publications content icon
    E-pub ahead of print

    Effect of emulsified biomass-fuel on the film formation behavior of diesel engine lubricating oil

    Karl Dearn, , , & , 2 Dec 2016, (E-pub ahead of print) In: Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section). 32, 6, p. 1142-1149 8 p.

    Research output: Contribution to journalArticlepeer-review

  174. Publications content icon
    Published
  175. Publications content icon
    E-pub ahead of print

    Heat transfer enhancement in gas-solid flow

    Yongliang Li, Yulong Ding & , 26 Jul 2014, (E-pub ahead of print) In: Huagong Xuebao/CIESC Journal. 65, 7, p. 2485-2494 10 p.

    Research output: Contribution to journalReview articlepeer-review

  176. Publications content icon
    Published

    Experimental study of the effect of ullage height on flame characteristics of pool fires

    Mehdi Jangi, , & , Jun 2020, In: Combustion and Flame. 216, p. 245-255 11 p.

    Research output: Contribution to journalArticlepeer-review

  177. Publications content icon
    Published
  178. Publications content icon
    Published

    A waste cryogenic energy assisted freshwater generator for marine applications

    Dawei Wu, Athanasios Tsolakis & , 15 Mar 2021, In: Desalination. 500, 114898.

    Research output: Contribution to journalArticlepeer-review

  179. Publications content icon
    Published

    Interfacial instabilities due to immiscible fluid displacement in circular and non-circular microchannels

    Nina Kovalchuk, & Mark Simmons, 1 May 2020, In: Experimental Thermal and Fluid Science. 113, p. 1-11 11 p., 110045.

    Research output: Contribution to journalArticlepeer-review

  180. Publications content icon
    Published

    Evolution of gas diffusion layer structures for aligned Pt nanowire electrodes in PEMFC applications

    Robert Steinberger-Wilckens & Shangfeng Du, 20 Jul 2018, In: Electrochimica Acta. 279, p. 99-107 9 p.

    Research output: Contribution to journalArticlepeer-review

  181. Publications content icon
    Published

    Editorial for the special issue From Nanoinformatics to Nanomaterials Risk Assessment and Governance

    Iseult Lynch, , , , & , 7 Jan 2021, In: Nanomaterials. 11, 1, 5 p., 121.

    Research output: Contribution to journalEditorial

  182. Publications content icon
    Published
  183. Publications content icon
    Published

    Deciphering the interplay among multisite phosphorylation, interaction dynamics, and conformational transitions in a tripartite protein system

    Aneika Leney, , & , 27 Jul 2016, In: ACS Central Science. 2, 7, p. 445-455 11 p.

    Research output: Contribution to journalArticlepeer-review

  184. Publications content icon
    Published

    Flow properties of an intact MPL from nano-tomography and pore network modelling

    Kyle Jiang & , 15 Nov 2014, In: Fuel. 136, p. 307-315 9 p.

    Research output: Contribution to journalArticlepeer-review

  185. Publications content icon
    Published
  186. Publications content icon
    Published

    Application of silver in microtubular solid oxide fuel cells

    Artur Majewski & Aman Dhir, Aug 2018, In: Materials for Renewable and Sustainable Energy. 7, 12 p., 16.

    Research output: Contribution to journalArticlepeer-review

  187. Publications content icon
    Published

    Development of patch clamping

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 3-16 14 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  188. Publications content icon
    Published

    Effect of roughness on gigaseal formation

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 29-47 19 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  189. Publications content icon
    Published

    Study of glass micropipettes from tip formation to characterization

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 75-94 20 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  190. Publications content icon
    Published
  191. Publications content icon
    Published
  192. Publications content icon
    Published

    A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions

    Andy Ingram & , 1 Feb 2012, In: Powder Technology. 217, p. 540-547 8 p.

    Research output: Contribution to journalArticlepeer-review

  193. Publications content icon
    Published
  194. Publications content icon
    Published

    Nanocomposites containing neutral blue emitting cyclometalated iridium(III) emitters for oxygen sensing

    Etienne Baranoff, 26 Jun 2012, In: Chemistry of Materials. 24, 12, p. 2330-2338 9 p.

    Research output: Contribution to journalArticlepeer-review

  195. Publications content icon
    Published

    The next-generation predictive tools for multiphase flows

    Mark Simmons, 2 Apr 2014, Sustainable Engineering Forum 2014 - Core Programming Area at the 2014 AIChE Spring Meeting and 10th Global Congress on Process Safety. AIChE, p. 231-238 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  196. Publications content icon
    Published
  197. Publications content icon
    Published

    Correction to structure prediction of Li-Sn and Li-Sb intermetallics for Lithium-Ion batteries anodes

    Andrew Morris, 26 Jul 2018, In: Chemistry of Materials. 30, 15, p. 5516-5517 2 p.

    Research output: Contribution to journalComment/debatepeer-review

  198. Publications content icon
    Published

    Zinc complexes for PLA formation and chemical recycling: towards a circular economy

    Luis Roman Ramirez, , Joe Wood & , 19 Dec 2019, In: ChemSusChem. 12, 24, p. 5233-5238 6 p.

    Research output: Contribution to journalArticlepeer-review

  199. Publications content icon
    Published

    Probing and tuning the permeability of polymersomes

    Amanda K. Pearce, Jeff Foster & Rachel O'Reilly, 27 Jan 2021, In: ACS Central Science. 7, 1, p. 30-38 9 p.

    Research output: Contribution to journalArticlepeer-review

  200. Publications content icon
    Published

    Catalyst: size distribution in self-assembly matters

    Rachel O'Reilly, 14 Mar 2019, In: Chem. 5, 3, p. 487-490 4 p.

    Research output: Contribution to journalArticlepeer-review

  201. Publications content icon
    Published

    Correlation of Physicochemical Properties with the Catalytic Performance of Fe-Doped Titanium Dioxide Powders

    Neil Rowson, , , & , 5 Aug 2015, In: Industrial & Engineering Chemistry Research. 54, 30, p. 7346-7351 6 p.

    Research output: Contribution to journalArticlepeer-review

  202. Publications content icon
    Published

    Influence of pH on the formulation of TiO2 nano-crystalline powders with high photocatalytic activity

    Neil Rowson & , Feb 2014, In: Powder Technology. 253, p. 22-28 7 p.

    Research output: Contribution to journalArticlepeer-review

  203. Publications content icon
    Published

    Eliminating the use of fat in the production of extruded snacks by applying starch coating

    Bettina Wolf, 20 May 2016, Chemical Engineering Transactions Volume 49. Italian Association of Chemical Engineering - AIDIC, p. 625-630 6 p. (Chemical Engineering Transactions; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  204. Publications content icon
    Published

    The effect of anode support on the electrochemical performance of microtubular solid oxide fuel cells fabricated by gel-casting

    M. Elena Navarro, & , 16 Apr 2015, In: RSC Advances. 5, 49, p. 39350-39357 8 p.

    Research output: Contribution to journalArticlepeer-review

  205. Publications content icon
    E-pub ahead of print

    Contact lenses for continuous corneal temperature monitoring

    Haider Butt, Daniele Vigolo & Ali Yetisen, 11 Apr 2019, (E-pub ahead of print) In: RSC Advances. 9, 20, p. 11433-11442 10 p.

    Research output: Contribution to journalArticlepeer-review

  206. Publications content icon
    Published
  207. Publications content icon
    Published

    Effect of chyme viscosity and nutrient feedback mechanism on gastric emptying

    Thomas Moxon, , , Peter Fryer, & Serafim Bakalis, 2 Nov 2017, In: Chemical Engineering Science. 171, p. 318-330 13 p.

    Research output: Contribution to journalArticlepeer-review

  208. Publications content icon
    Published

    Analyzing the effects of stromal cells on the recruitment of leukocytes from flow

    Ed Rainger, Gerard Nash & Helen McGettrick, 7 Jan 2015, In: Journal of Visualized Experiments. 95, e52480.

    Research output: Contribution to journalArticlepeer-review

  209. Publications content icon
    Published
  210. Publications content icon
    Published

    Microstructure, thermo-physical, mechanical and wear properties of in-situ formed boron carbide -Zirconium diboride composite

    1 Jan 2018, In: Ceramics - Silikaty. 62, 1, p. 15-30 16 p.

    Research output: Contribution to journalArticlepeer-review

  211. Publications content icon
    Published
  212. Publications content icon
    Published

    Investigation on heat transfer behaviour of supercritical nitrogen

    Ciprian Negoescu, Yongliang Li, Bushra Al-Duri & Yulong Ding, 2016, Proceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2016. Avestia Publishing, 2 p. HTFF 134

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  213. Publications content icon
    Published

    Mixing studies with elephant ear impellers: Are they low shear agitators?

    Alvin Nienow, , Waldemar Bujalski & Mark Simmons, 1 Dec 2008, AIChE Annual Meeting, Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  214. Publications content icon
    Published

    Poly (vinyl alcohol) modification of low acyl gellan hydrogels for applications in tissue regeneration

    Abigail Norton-Welch, Robin Hancocks & Liam Grover, 5 Dec 2014, In: Food Hydrocolloids. 42, P3, p. 373-377 5 p.

    Research output: Contribution to journalArticlepeer-review

  215. Publications content icon
    Published
  216. Publications content icon
    Published

    Microgravity experiments of single droplet combustion in oscillatory flow at elevated pressure

    Mehdi Jangi, , & , 16 Mar 2009, In: Proceedings of the Combustion Institute. 32, 2, p. 2171-2178 8 p.

    Research output: Contribution to journalArticlepeer-review

  217. Publications content icon
    Accepted/In press
  218. Publications content icon
    Published

    Waste to power

    Andreas Hornung & , 1 Feb 2012, TJ, 11, 2, p. 55-64 10 p.

    Research output: Contribution to specialist publicationArticle

  219. Publications content icon
    Published

    Food and market waste – a pathway to sustainable fuels and waste valorization

    Miloud Ouadi, Asif Bashir, Lais Galileu Speranza, Hessam Jahangiri & Andreas Hornung, 17 Oct 2019, In: Energy & Fuels. 33, 10, p. 9843-9850 8 p.

    Research output: Contribution to journalArticlepeer-review

  220. Publications content icon
    Published
  221. Publications content icon
    Published
  222. Publications content icon
    Published

    Emulsification in Rotor-Stator mixers

    Andrzej Pacek, , & , 29 Jan 2013, Emulsion Formation and Stability. Wiley-VCH Verlag, p. 127-167 41 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  223. Publications content icon
    Published
  224. Publications content icon
    Published

    Tracking pellet motion in a wurster coater using positron emission

    Jonathan Seville, Andy Ingram, & Xianfeng Fan, 1 Dec 2006.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  225. Publications content icon
    Published

    Size and strength distributions of melamine-formaldehyde microcapsules prepared by membrane emulsification

    Jon Preece & Zhibing Zhang, Sep 2012, In: Powder Technology. 227, p. 43-50 8 p.

    Research output: Contribution to journalArticlepeer-review

  226. Publications content icon
    Published

    Structure and mechanical properties of consumer-friendly PMMA microcapsules

    Ruben Mercade-Prieto, , Jon Preece & Zhibing Zhang, 21 Aug 2013, In: Industrial & Engineering Chemistry Research. 52, 33, p. 11253-11265 13 p.

    Research output: Contribution to journalArticlepeer-review

  227. Publications content icon
    Published
  228. Publications content icon
    Published

    Modelling of diesel spray flames under engine-like conditions using an accelerated Eulerian Stochastic Fields method

    Mehdi Jangi, , & , 1 Jul 2018, In: Combustion and Flame. 193, p. 363-383 21 p.

    Research output: Contribution to journalArticlepeer-review

  229. Publications content icon
    Published

    Effects of ambient pressure on ignition and flame characteristics in diesel spray combustion

    Mehdi Jangi, , , & , 1 Feb 2019, In: Fuel. 237, p. 676-685 10 p.

    Research output: Contribution to journalArticlepeer-review

  230. Publications content icon
    Published

    Predicting Cytotoxicity of Metal Oxide Nanoparticles using Isalos Analytics Platform

    Tassos Papadiamantis, , , , , , , , , Eva Valsami-Jones, Iseult Lynch, , & , 13 Oct 2020, In: Nanomaterials. 10, 10, p. 1-19 19 p., 2017.

    Research output: Contribution to journalArticlepeer-review

  231. Publications content icon
    Published

    Metadata Stewardship in Nanosafety Research: Community-Driven Organisation of Metadata Schemas to Support FAIR Nanoscience Data

    Tassos Papadiamantis, , , , , , , , , , , , , & Iseult Lynch, 15 Oct 2020, In: Nanomaterials. 10, 10, p. 1-49 49 p., 2033.

    Research output: Contribution to journalArticlepeer-review

  232. Publications content icon
    Published

    A compact hybrid batch/semi-batch reverse osmosis (HBSRO) system for high-recovery, low-energy desalination

    Kiho Park & Philip Davies, 15 May 2021, In: Desalination. 504, 114976.

    Research output: Contribution to journalArticlepeer-review

  233. Publications content icon
    Published

    Density Functional Theory Calculations on Copper-Mediated Peroxide Decomposition Reactions: Implications for Jet Fuel Autoxidation

    Simon Blakey, & , 18 Jun 2020, In: Energy and Fuels. 34, 6, p. 7439-7447 9 p.

    Research output: Contribution to journalArticlepeer-review

  234. Publications content icon
    Published

    Electrochemical and spectroelectrochemical investigations of perylene peri-tetracarbonyl species

    Neil Champness, 23 Jul 2020, In: Dyes and Pigments. 183, 108735.

    Research output: Contribution to journalArticlepeer-review

  235. Publications content icon
    Published

    Synthesis and applications of anisotropic nanoparticles with precisely defined dimensions

    Amanda K. Pearce, Thomas Wilks, Maria Chiara Arno & Rachel O'Reilly, Jan 2021, In: Nature Reviews Chemistry. 5, 1, p. 21–45 25 p.

    Research output: Contribution to journalReview articlepeer-review

  236. Publications content icon
    Published

    Contact electrification and charge distribution on elongated particles in a vibrating container

    Mike Adams, , & , 24 Mar 2015, In: Chemical Engineering Science. 125, p. 238-247 10 p.

    Research output: Contribution to journalArticlepeer-review

  237. Publications content icon
    Published

    Numerical analysis of contact electrification of non-spherical particles in a rotating drum

    Chuan-yu Wu & Mike Adams, Nov 2015, In: Powder Technology. 285, p. 110-122 13 p.

    Research output: Contribution to journalArticlepeer-review

  238. Publications content icon
    Published

    Mechanistic study of equilibrium and kinetic behaviour of tea cream formation

    Edward Pelan, 1 Jan 1998, In: Food Hydrocolloids. 12, 1, p. 9-15 7 p.

    Research output: Contribution to journalArticlepeer-review

  239. Publications content icon
    Published

    Some molecular and colloidal aspects of tea cream formation

    Edward Pelan & , 1 Jan 1998, In: Food Hydrocolloids. 12, 4, p. 443-450 8 p.

    Research output: Contribution to journalArticlepeer-review

  240. Publications content icon
    E-pub ahead of print

    N-alkanes phase change materials and their microencapsulation for thermal energy storage: A critical review

    Qinghua Yu, Xiaohui She, Yongliang Li & Yulong Ding, 30 May 2018, (E-pub ahead of print) In: Energy and Fuels.

    Research output: Contribution to journalReview articlepeer-review

  241. Publications content icon
    Published

    Novel in situ tribo-catalysis for improved tribological properties of bio-oil model compound

    Karl Dearn, & , 15 Jan 2018, In: Fuel. 212, p. 546-553 8 p.

    Research output: Contribution to journalArticlepeer-review

  242. Publications content icon
    Published

    Particle-stabilized food emulsions

    Roman Pichot, , Ioanna Zafeiri, Fotis Spyropoulos & Ian Norton, 2015, Particle-Stabilized Emulsions and Colloids: Formation and Applications. Ngai, T. & Bon, S. (eds.). 3 ed. Royal Society of Chemistry, Vol. 2015-January. p. 247-282 36 p. (RSC Soft Matter; vol. 2015-January, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  243. Publications content icon
    Published

    The electro-oxidation of dimethylamine borane: Part 2, in situ FTIR on single-crystal gold electrodes

    Paramaconi Rodriguez, 1 Sep 2011, In: Electrochimica Acta. 56, 22, p. 7637-7643 7 p.

    Research output: Contribution to journalArticlepeer-review

  244. Publications content icon
    Published
  245. Publications content icon
    Published

    Analysis of operating conditions of a continuous powder mixer using pept

    Andy Ingram, Jonathan Seville, & , 1 Dec 2008, AIChE100 - 2008 AIChE Annual Meeting, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  246. Publications content icon
    Published

    Supercritical antisolvent coprecipitation mechanisms

    Valentina Prosapio, & , Aug 2018, In: Journal of Supercritical Fluids. 138, p. 247-258 12 p.

    Research output: Contribution to journalArticlepeer-review

  247. Publications content icon
    Accepted/In press

    LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

    Mehdi Jangi, , & , 2020, (Accepted/In press) In: Proceedings of the Combustion Institute.

    Research output: Contribution to journalArticlepeer-review

  248. Publications content icon
    E-pub ahead of print
  249. Publications content icon
    Published

    Simulation study of anomalous thermal properties of molten nitrate salt

    Alessio Alexiadis & Yulong Ding, 1 Jun 2017, In: Powder Technology. 314, p. 660-664

    Research output: Contribution to journalArticlepeer-review

  250. Publications content icon
    Published
  251. Publications content icon
    Published
  252. Publications content icon
    Published

    The effect of limonene on the crystallization of cocoa butter

    Bettina Wolf, 1 Mar 2012, In: JAOCS, Journal of the American Oil Chemists' Society. 89, 3, p. 437-445 9 p.

    Research output: Contribution to journalArticlepeer-review

  253. Publications content icon
    Published
  254. Publications content icon
    Published
  255. Publications content icon
    Published

    Specific surface reactions for identification of platinum surface domains: Surface characterization and electrocatalytic tests

    Paramaconi Rodriguez, 1 Aug 2005, In: Electrochimica Acta. 50, 21, p. 4308-4317 10 p.

    Research output: Contribution to journalArticlepeer-review

  256. Publications content icon
    Published
  257. Publications content icon
    Published

    P-x data of (acetic acid + water) at T = (412.6, 443.2, 483.2) K

    Luis Roman Ramirez & Gary Leeke, 9 Jun 2016, In: Journal of Chemical and Engineering Data. 61, 6, p. 2078-2082 5 p.

    Research output: Contribution to journalArticlepeer-review

  258. Publications content icon
    Accepted/In press
  259. Publications content icon
    Published
  260. Publications content icon
    Published

    A coarse grained model for viscoelastic solids in discrete multiphysics simulations

    Iwan Halim Sahputra, Alessio Alexiadis & Mike Adams, Jun 2020, In: ChemEngineering. 4, 2, p. 1-15 15 p., 30.

    Research output: Contribution to journalArticlepeer-review

  261. Publications content icon
    Published
  262. Publications content icon
    Published

    Development of an experimental procedure for real time investigation of diffusion in foods

    Peter Fryer, Jun 2011, In: Sensing and Instrumentation for Food Quality and Safety. 5, 2, p. 78-89 12 p.

    Research output: Contribution to journalArticlepeer-review

  263. Publications content icon
    Published
  264. Publications content icon
    Published

    Monitoring of liquid sprayed conical spouted beds by recurrence plots

    Chiya Savari, , , , & , 1 Jul 2017, In: Powder Technology. 316, p. 148-156 9 p.

    Research output: Contribution to journalArticlepeer-review

  265. Publications content icon
    Published

    Non-intrusive characterization of particle size changes in fluidized beds using recurrence plots

    Chiya Savari, , & , 26 Apr 2016, In: AIChE Journal. 62, 10, p. 3547-3561 15 p.

    Research output: Contribution to journalArticlepeer-review

  266. Publications content icon
    Published

    Detecting stability of conical spouted beds based on information entropy theory

    Chiya Savari, , , & , 1 Feb 2019, In: Powder Technology. 343, p. 185-193 9 p.

    Research output: Contribution to journalArticlepeer-review

  267. Publications content icon
    Published

    Early detection of agglomeration in conical spouted beds using recurrence plots

    Chiya Savari, , , & , 6 Jul 2016, In: Industrial and Engineering Chemistry Research. 55, 26, p. 7179-7190 12 p.

    Research output: Contribution to journalArticlepeer-review

  268. Publications content icon
    Published

    In Situ Synchrotron X-ray Diffraction Study of the Sol-Gel Synthesis of Fe<inf>3</inf>N and Fe<inf>3</inf>C

    Zoe Schnepp, , , , & , 28 Jul 2015, In: Chemistry of Materials. 27, 14, p. 5094-5099 6 p.

    Research output: Contribution to journalArticlepeer-review

  269. Publications content icon
    Published
  270. Publications content icon
    Published

    Chapter 4 Positron emission imaging in Chemical Engineering

    Jonathan Seville, Andy Ingram, Xianfeng Fan & David Parker, 7 Sep 2009, Characterization of Flow, Particles and Interfaces. Li, J. (ed.). Elsevier, p. 149-178 30 p. (Advances in Chemical Engineering; vol. 37).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  271. Publications content icon
    Published

    Three-dimensional representations of powder mixedness using a positron emission tracking technique

    Jonathan Seville, Xianfeng Fan, Andy Ingram, David Parker, & , 24 Apr 2006.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  272. Publications content icon
    Published

    Experimental optimization of catalytic process in situ for heavy-oil and bitumen upgrading

    Amjad Shah, Robert Fishwick, Gary Leeke, Joe Wood, & , 1 Nov 2011, In: Journal of Canadian Petroleum Technology. 50, 11-12, p. 33-47 15 p.

    Research output: Contribution to journalArticlepeer-review

  273. Publications content icon
    Published

    Carboxyl group enhanced CO tolerant GO supported Pt catalysts: DFT and electrochemical analysis

    Surbhi Sharma, , , , & , 11 Nov 2014, In: Chemistry of Materials. 26, 21, p. 6142-6151 10 p.

    Research output: Contribution to journalArticlepeer-review

  274. Publications content icon
    Published
  275. Publications content icon
    Published
  276. Publications content icon
    Published

    Investigation of deposition in aviation gas turbine fuel nozzles by coupling of experimental data and heat transfer calculations

    Simon Blakey & , 2013, In: Fuel. 106, p. 79-87 9 p.

    Research output: Contribution to journalArticlepeer-review

  277. Publications content icon
    Published

    Exhaust energy recovery via catalytic ammonia decomposition to hydrogen for low carbon clean vehicles

    Sak Sittichompoo, Hadi Nozari, Martin Herreros, , , , & Athanasios Tsolakis, 1 Feb 2021, In: Fuel. 285, 119111.

    Research output: Contribution to journalArticlepeer-review

  278. Publications content icon
    Published
  279. Publications content icon
    Published

    Freeze drying and rehydration of alginate fluid gels

    Fabio Smaniotto, Valentina Prosapio, Ioanna Zafeiri & Fotis Spyropoulos, Feb 2020, In: Food Hydrocolloids. 99, 105352.

    Research output: Contribution to journalArticlepeer-review

  280. Publications content icon
    Published

    Wall material properties of yeast cells: Part 1. Cell measurements and compression experiments

    Zhibing Zhang & Colin Thomas, Jun 2000, In: Chemical Engineering Science. 55, 11, p. 2031-2041 11 p.

    Research output: Contribution to journalArticlepeer-review

  281. Publications content icon
    Published

    Ammonia removal from water using sodium hydroxide modified zeolite mordenite

    Joseph Hriljac, Tzu-Yu Chen, , , & , 2015, In: RSC Advances. 5, 102, p. 83689-83699 11 p.

    Research output: Contribution to journalArticlepeer-review

  282. Publications content icon
    Published

    Lift-off and stabilization of n-heptane combustion in a diesel engine with a multiple-nozzle injection

    Mehdi Jangi, , & , 11 Jan 2013, In: Proceedings of the Combustion Institute. 34, 2, p. 3031-3038 8 p.

    Research output: Contribution to journalArticlepeer-review

  283. Publications content icon
    Published
  284. Publications content icon
    Published

    Bet fat: Eat gel

    Fotis Spyropoulos, 1 Feb 2010, Chemical Engineer, 824, p. 32-34 3 p.

    Research output: Contribution to specialist publicationArticle

  285. Publications content icon
    Published
  286. Publications content icon
    Published

    A Colorful Pallet of B-Phycoerythrin Proteoforms Exposed by a Multimodal Mass Spectrometry Approach

    Aneika Leney & , 9 May 2019, In: Chem. 5, 5, p. 1302-1317 16 p.

    Research output: Contribution to journalArticlepeer-review

  287. Publications content icon
    Published

    The influence of stress on the oxidation of a ni-based superalloy

    Mary Taylor, Hugh Evans, , & , 1 Jul 2019, In: Corrosion Science. 154, p. 277-285 9 p.

    Research output: Contribution to journalArticlepeer-review

  288. Publications content icon
    Published

    Modelling temperature distributions in cooling chocolate moulds

    Peter Fryer, 1 Aug 2000, In: Chemical Engineering Science. 55, 16, p. 3123-3132 10 p.

    Research output: Contribution to journalArticlepeer-review

  289. Publications content icon
    Published
  290. Publications content icon
    Published
  291. Publications content icon
    Published

    Assessing the potential of using chaotic advection flow for thermal food processing in heating tubes

    Mostafa Barigou, May 2016, In: Journal of Food Engineering. 177, p. 9-20 12 p.

    Research output: Contribution to journalArticlepeer-review

  292. Publications content icon
    Published

    Correlating the lifetime and fluorine content of iridium(III) emitters in green light-emitting electrochemical cells

    Etienne Baranoff, & , 27 Aug 2013, In: Chemistry of Materials. 25, 16, p. 3391-3397 7 p.

    Research output: Contribution to journalArticlepeer-review

  293. Publications content icon
    Published
  294. Publications content icon
    Published
  295. Publications content icon
    Published
  296. Publications content icon
    Published

    Computational modelling and characterisation of nanoparticle-based tuneable photonic crystal sensors

    Ali Yetisen, , , , , & Haider Butt, 28 Feb 2014, In: RSC Advances. 4, 21, p. 10454-10461 8 p.

    Research output: Contribution to journalArticlepeer-review

  297. Publications content icon
    Published

    Exfoliation of Layered Na-Ion Anode Material Na2Ti3O7 for Enhanced Capacity and Cyclability

    Phoebe Allan, , , , , , & , 13 Mar 2018, In: Chemistry of Materials. 30, 5, p. 1505-1516 12 p.

    Research output: Contribution to journalArticlepeer-review

  298. Publications content icon
    Published

    Regime map development for continuous twin screw granulation

    Andy Ingram & Jonathan Seville, 14 Jan 2013, In: Chemical Engineering Science. 87, p. 315-326 12 p.

    Research output: Contribution to journalArticlepeer-review

  299. Publications content icon
    Published
  300. Publications content icon
    Published
  301. Publications content icon
    Published

    Investigation of gasoline containing GTL naphtha in a spark ignition engine at full load conditions

    Chongming Wang, , , & Hongming Xu, 15 Apr 2017, In: Fuel. 194, p. 436-447 12 p.

    Research output: Contribution to journalArticlepeer-review

  302. Publications content icon
    Published

    Microscopic investigation of near-field spray characteristics of 2-methylfuran, ethanol and isooctane under flash boiling conditions

    Hongming Xu & , 1 Mar 2018, In: Fuel. 215, p. 142-152 11 p.

    Research output: Contribution to journalArticlepeer-review

  303. Publications content icon
    Published

    Significance of RON and MON to a modern DISI engine

    Chongming Wang, , , & Hongming Xu, 1 Dec 2017, In: Fuel. 209, p. 172-183 12 p.

    Research output: Contribution to journalArticlepeer-review

  304. Publications content icon
    Published

    Alginate/protamine/silica hybrid capsules with ultrathin membranes for laccase immobilization

    Zhibing Zhang, Feb 2013, In: AIChE Journal. 59, 2, p. 380-389 10 p.

    Research output: Contribution to journalArticlepeer-review

  305. Publications content icon
    Published
  306. Publications content icon
    Published

    Self-healing of structural carbon fibres in polymer composites

    Yongjing Wang Wang, , , , & Duc Pham, 1 Jan 2020, In: Cogent Engineering. 1799909.

    Research output: Contribution to journalArticlepeer-review

  307. Publications content icon
    Published

    Dynamic spray development of 2-methylfuran compared to ethanol and isooctane under ultra-high injection pressure

    Hongming Xu & , 15 Dec 2018, In: Fuel. 234, p. 581-591 11 p.

    Research output: Contribution to journalArticlepeer-review

  308. Publications content icon
    Published

    Splash blended ethanol in a spark ignition engine – Effect of RON, octane sensitivity and charge cooling

    Chongming Wang, , , & Hongming Xu, 15 May 2017, In: Fuel. 196, p. 21-31 11 p.

    Research output: Contribution to journalArticlepeer-review

  309. Publications content icon
    Published

    Spray characteristics of a gasoline-diesel blend (ULG75) using high-speed imaging techniques

    Chongming Wang, Amrit Sahu, Carlo Coratella, , & Hongming Xu, 1 Mar 2019, In: Fuel. 239, p. 677-692 16 p.

    Research output: Contribution to journalArticlepeer-review

  310. Publications content icon
    Published

    Electrically Driven N(sp 2)- C(sp 2/3) Bond Cleavage of Sulfonamides

    Alan M Jones, 2 Mar 2020, In: ACS Sustainable Chemistry & Engineering. 8, 8, p. 3487-3493 7 p.

    Research output: Contribution to journalArticlepeer-review

  311. Publications content icon
    Published

    Mechanical characterization of hydrogels and its implications for cellular activities

    Alicia El Haj & , 18 Mar 2014, Hydrogels in Cell-Based Therapies. Connon, C. J. & Hamley, I. W. (eds.). p. 171-190 20 p. (RSC Soft Matter).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  312. Publications content icon
    Published

    Density-driven segregation in binary and ternary granular systems

    Christopher Windows-Yule & David Parker, 1 Jan 2015, In: KONA Powder and Particle Journal. 32, p. 163-175 13 p.

    Research output: Contribution to journalArticlepeer-review

  313. Publications content icon
    Published
  314. Publications content icon
    E-pub ahead of print

    A quantitative determination of lipid bilayer deposition efficiency using AFM

    Mary Wood, , , & , 2 Jun 2021, (E-pub ahead of print) In: RSC Advances. 11, 32, p. 19768-19778 11 p.

    Research output: Contribution to journalArticlepeer-review

  315. Publications content icon
    Published

    110th Anniversary: Slurryability: What Makes a Powder Hard to Incorporate into a Slurry?

    Mark Simmons, Richard Greenwood, & , 7 Aug 2019, In: Industrial & Engineering Chemistry Research. 58, 31, p. 14396-14409 14 p.

    Research output: Contribution to journalArticlepeer-review

  316. Publications content icon
    Published

    Growing collaborations between Chinese and UK young scholars on chemical science and technology

    Yongliang Li & , 5 Jan 2021, In: Frontiers of Chemical Science and Engineering. 15, p. 1-3 3 p.

    Research output: Contribution to journalEditorialpeer-review

  317. Publications content icon
    Published

    LES/TPDF investigation of the effects of ambient methanol concentration on pilot fuel ignition characteristics and reaction front structures

    Mehdi Jangi & , 1 Mar 2021, In: Fuel. 287, 10 p., 119502.

    Research output: Contribution to journalArticlepeer-review

  318. Publications content icon
    Published

    A boronic acid-based fluorescent hydrogel for monosaccharide detection

    Wenbo Chen, , George Williams, , , John Fossey & Tony James, 21 May 2019, In: Frontiers of Chemical Science and Engineering. 2020, p. 112-116

    Research output: Contribution to journalArticlepeer-review

  319. Publications content icon
    Published

    The effect of carbon within corrosion pits of iron in chloride solutions

    Trevor Rayment & Alison Davenport, 4 Jul 2017, In: Corrosion Engineering Science and Technology. 52, 5, p. 383-390 8 p.

    Research output: Contribution to journalArticlepeer-review

  320. Publications content icon
    Published

    Suzuki homo-coupling reaction based fluorescent sensors for monosaccharides

    John Fossey, & , 30 Jul 2014, In: RSC Advances. 4, 66, p. 35238-35241 4 p.

    Research output: Contribution to journalArticlepeer-review

  321. Publications content icon
    Published

    Laminar burning characteristics of upgraded biomass pyrolysis fuel derived from rice husk at elevated pressures and temperatures

    Chongming Wang, Amrit Sahu, Hongming Xu, , & , 15 Dec 2017, In: Fuel. 210, p. 249-261 13 p.

    Research output: Contribution to journalArticlepeer-review

  322. Publications content icon
    Published

    Multiple-particle tracking using the birmingham positron camera

    Zhufang Yang, David Parker, Serafim Bakalis, Xianfeng Fan, Jonathan Seville & Peter Fryer, 27 Apr 2006.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  323. Publications content icon
    Published

    Analysis of fine particle grinding process on vertically stirred media mills

    Neil Rowson, 2016, Particle Technology Forum 2016 - Core Programming Area at the 2016 AIChE Annual Meeting. AIChE, p. 286 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  324. Publications content icon
    Published

    Effect of operating parameters on fine particle grinding in a vertically stirred media mill

    Neil Rowson, & Andy Ingram, 13 Apr 2017, In: Separation Science and Technology . 52, 6, p. 1143-1152 10 p.

    Research output: Contribution to journalArticlepeer-review

  325. Publications content icon
    Published
  326. Publications content icon
    Published

    Contact mechanics of single particle compression and bulk compression of single component and binary mixtures of particles

    Mike Adams & Zhibing Zhang, 2006, AIChE Annual Meeting, Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  327. Publications content icon
    Published

    Influence of pH on fluid gels produced from egg and whey protein isolate

    Tom Mills & Ian Norton, Feb 2021, In: Food Hydrocolloids. 111, 9 p., 106108.

    Research output: Contribution to journalArticlepeer-review

  328. Publications content icon
    Published

    Numerical simulation of combined adsorption desalination and cooling cycles with integrated evaporator/condenser

    Saad Mahmoud Mahmoud & Raya Al-Dadah, 15 Aug 2016, In: Desalination. 392, p. 14-24 11 p.

    Research output: Contribution to journalArticlepeer-review

  329. Publications content icon
    Published

    Investigation of hot-EGR and low pressure injection strategy for a Dieseline fuelled PCI engine

    Soheil Zeraati Rezaei, & Hongming Xu, 1 Nov 2017, In: Fuel. 207, p. 165-178 14 p.

    Research output: Contribution to journalArticlepeer-review

  330. Publications content icon
    Published

    Experimental investigation of particle emissions from a Dieseline fuelled compression ignition engine

    Soheil Zeraati Rezaei, , Martin Herreros, Xiao Ma & Hongming Xu, 1 Sep 2019, In: Fuel. 251, p. 175-186 12 p.

    Research output: Contribution to journalArticlepeer-review

  331. Publications content icon
    Published
  332. Publications content icon
    Published
  333. Publications content icon
    Published

    Improved HRTEM image processing methods and the application on soot nanostructure analysis for GDI engine

    Xiao Ma, , Hongming Xu & , 1 May 2020, In: Fuel. 267, 19 p., 116974.

    Research output: Contribution to journalArticlepeer-review

  334. Publications content icon
    Published

    Impact of Oil Composition on Microwave Heating Behavior of Heavy Oils

    Abarasi Hart, Joe Wood, & , 15 Feb 2018, In: Energy and Fuels. 32, 2, p. 1592-1599 8 p.

    Research output: Contribution to journalArticlepeer-review

  335. Publications content icon
    Published

    Ionic liquid modified Pt/C electrocatalysts for cathode application in proton exchange membrane fuel cells

    Rose Zhang, , , & Shangfeng Du, 1 Dec 2019, In: Frontiers of Chemical Science and Engineering. 13, 4, p. 695-701 7 p.

    Research output: Contribution to journalArticlepeer-review

  336. Publications content icon
    Published

    Reliability of the spherical agglomerate models for catalyst layer in polymer electrolyte membrane fuel cells

    Kyle Jiang & , 24 Apr 2014, In: Electrochimica Acta. 133, p. 475-483 9 p.

    Research output: Contribution to journalArticlepeer-review

  337. Publications content icon
    Published

    Characterization of the breaking force of latex particle aggregates by micromanipulation

    Colin Thomas & Zhibing Zhang, Dec 1999, In: Particle & Particle Systems Characterization. 16, 6, p. 278-283 6 p.

    Research output: Contribution to journalArticlepeer-review

  338. Publications content icon
    Published
  339. Publications content icon
    Published

    Chapter 2 Micromanipulation in Mechanical Characterisation of Single Particles

    Zhibing Zhang, & Colin Thomas, 2009, In: Advances in Chemical Engineering. 37, p. 29-85 57 p.

    Research output: Contribution to journalArticlepeer-review

  340. Publications content icon
    Published

    Mechanical strength of single microcapsules determined by a novel micromanipulation technique

    Zhibing Zhang, & Colin Thomas, Jan 1999, In: Journal of Microencapsulation. 16, 1, p. 117-124 8 p.

    Research output: Contribution to journalArticlepeer-review

  341. Publications content icon
    Published
  342. Publications content icon

    High viscosity effects on characteristics of oil and gas two-phase flow in horizontal pipes

    4 May 2013, In: Chemical Engineering Science. 95, p. 343-352 10 p.

    Research output: Contribution to journalArticlepeer-review