Microstructural development in equiatomic multicomponent alloys

Research output: Contribution to journalArticle

Standard

Microstructural development in equiatomic multicomponent alloys. / Cantor, B; Chang, Isaac; Knight, P; Vincent, AJB.

In: Materials Science and Engineering A, Vol. A375-377, 15.07.2004, p. 213-218.

Research output: Contribution to journalArticle

Harvard

APA

Vancouver

Author

Cantor, B ; Chang, Isaac ; Knight, P ; Vincent, AJB. / Microstructural development in equiatomic multicomponent alloys. In: Materials Science and Engineering A. 2004 ; Vol. A375-377. pp. 213-218.

Bibtex

@article{099cadadb5804e058ef70422be80b028,
title = "Microstructural development in equiatomic multicomponent alloys",
abstract = "Multicomponent alloys containing several components in equal atomic proportions have been manufactured by casting and melt spinning, and their microstructures and properties have been investigated by a combination of optical microscopy, scanning electron microscopy, electron probe microanalysis, X-ray diffractrometry and microhardness measurements. Alloys containing 16 and 20 components in equal proportions are multiphase, crystalline and brittle both as-cast and after melt spinning. A five component Fe20Cr20Mn20Ni20Co20 alloy forms a single fcc solid solution which solidifies dendritically. A wide range of other six to nine component late transition metal rich multicomponent alloys exhibit the same majority fcc primary dendritic phase, which can dissolve substantial amounts of other transition metals such as Nb, Ti and V More electronegative elements such as Cu and Ge are less stable in the fcc dendrites and are rejected into the interdendritic regions. The total number of phases is always well below the maximum equilibrium number allowed by the Gibbs phase rule, and even further below the maximum number allowed under non-equilibrium solidification conditions. Glassy structures are not formed by casting or melt spinning of late transition metal rich multicomponent alloys, indicating that the confusion principle does not apply, and other factors are more important in promoting glass formation. (C) 2003 Elsevier B.V. All rights reserved.",
keywords = "multicomponent alloys, equiatomic, casting",
author = "B Cantor and Isaac Chang and P Knight and AJB Vincent",
year = "2004",
month = jul,
day = "15",
doi = "10.1016/j.msea.2003.10.257",
language = "English",
volume = "A375-377",
pages = "213--218",
journal = "Materials Science and Engineering A",
issn = "0921-5093",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Microstructural development in equiatomic multicomponent alloys

AU - Cantor, B

AU - Chang, Isaac

AU - Knight, P

AU - Vincent, AJB

PY - 2004/7/15

Y1 - 2004/7/15

N2 - Multicomponent alloys containing several components in equal atomic proportions have been manufactured by casting and melt spinning, and their microstructures and properties have been investigated by a combination of optical microscopy, scanning electron microscopy, electron probe microanalysis, X-ray diffractrometry and microhardness measurements. Alloys containing 16 and 20 components in equal proportions are multiphase, crystalline and brittle both as-cast and after melt spinning. A five component Fe20Cr20Mn20Ni20Co20 alloy forms a single fcc solid solution which solidifies dendritically. A wide range of other six to nine component late transition metal rich multicomponent alloys exhibit the same majority fcc primary dendritic phase, which can dissolve substantial amounts of other transition metals such as Nb, Ti and V More electronegative elements such as Cu and Ge are less stable in the fcc dendrites and are rejected into the interdendritic regions. The total number of phases is always well below the maximum equilibrium number allowed by the Gibbs phase rule, and even further below the maximum number allowed under non-equilibrium solidification conditions. Glassy structures are not formed by casting or melt spinning of late transition metal rich multicomponent alloys, indicating that the confusion principle does not apply, and other factors are more important in promoting glass formation. (C) 2003 Elsevier B.V. All rights reserved.

AB - Multicomponent alloys containing several components in equal atomic proportions have been manufactured by casting and melt spinning, and their microstructures and properties have been investigated by a combination of optical microscopy, scanning electron microscopy, electron probe microanalysis, X-ray diffractrometry and microhardness measurements. Alloys containing 16 and 20 components in equal proportions are multiphase, crystalline and brittle both as-cast and after melt spinning. A five component Fe20Cr20Mn20Ni20Co20 alloy forms a single fcc solid solution which solidifies dendritically. A wide range of other six to nine component late transition metal rich multicomponent alloys exhibit the same majority fcc primary dendritic phase, which can dissolve substantial amounts of other transition metals such as Nb, Ti and V More electronegative elements such as Cu and Ge are less stable in the fcc dendrites and are rejected into the interdendritic regions. The total number of phases is always well below the maximum equilibrium number allowed by the Gibbs phase rule, and even further below the maximum number allowed under non-equilibrium solidification conditions. Glassy structures are not formed by casting or melt spinning of late transition metal rich multicomponent alloys, indicating that the confusion principle does not apply, and other factors are more important in promoting glass formation. (C) 2003 Elsevier B.V. All rights reserved.

KW - multicomponent alloys

KW - equiatomic

KW - casting

UR - http://www.scopus.com/inward/record.url?scp=3142740222&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2003.10.257

DO - 10.1016/j.msea.2003.10.257

M3 - Article

VL - A375-377

SP - 213

EP - 218

JO - Materials Science and Engineering A

JF - Materials Science and Engineering A

SN - 0921-5093

ER -