Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions

Research output: Contribution to journalArticle

Standard

Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions. / Derkani, Maryam H.; Fletcher, Ashleigh J.; Fedorov, Maxim; Abdallah, Wael; Sauerer, Bastian; Anderson, James; Zhang, Zhenyu J.

In: Colloids and Interfaces, Vol. 3, No. 4, 62, 31.10.2019.

Research output: Contribution to journalArticle

Harvard

APA

Vancouver

Derkani MH, Fletcher AJ, Fedorov M, Abdallah W, Sauerer B, Anderson J et al. Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions. Colloids and Interfaces. 2019 Oct 31;3(4). 62. https://doi.org/10.3390/colloids3040062

Author

Derkani, Maryam H. ; Fletcher, Ashleigh J. ; Fedorov, Maxim ; Abdallah, Wael ; Sauerer, Bastian ; Anderson, James ; Zhang, Zhenyu J. / Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions. In: Colloids and Interfaces. 2019 ; Vol. 3, No. 4.

Bibtex

@article{8349081338aa44938a1541d5591c3a88,
title = "Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions",
abstract = "The influence of different types of salts (NaCl, CaCl 2 , MgCl 2 , NaHCO 3 , and Na 2 SO 4 ) on the surface characteristics of unconditioned calcite and dolomite particles, and conditioned with stearic acid, was investigated. This study used zeta potential measurements to gain fundamental understanding of physico-chemical mechanisms involved in surface charge modification of carbonate minerals in the presence of diluted salt solutions. By increasing the salt concentration of divalent cationic salt solution (CaCl 2 and MgCl 2 ), the zeta potential of calcite particles was altered, resulting in charge reversal from negative to positive, while dolomite particles maintained positive zeta potential. This is due to the adsorption of potential-determining cations (Ca 2+ and Mg 2+ ), and consequent changes in the structure of the diffuse layer, predominantly driven by coulombic interactions. On the other hand, chemical adsorption of potential-determining anions (HCO −3 and SO 2−4 ) maintained the negative zeta potential of carbonate surfaces and increased its magnitude up to 10 mM, before decreasing at higher salt concentrations. Physisorption of stearic acid molecules on the calcite and dolomite surfaces changed the zeta potential to more negative values in all solutions. It is argued that divalent cations (Ca 2+ and Mg 2+ ) would result in positive and neutral complexes with stearic acid molecules, which may result in strongly bound stearic acid films, whereas ions resulting in negative mineral surface charges (SO 2−4 and HCO −3 ) will cause stearic acid films to be loosely bound to the carbonate mineral surfaces. The suggested mechanism for surface charge modification of carbonates, in the presence of different ions, is changes in both distribution of ions in the diffuse layer and its structure as a result of ion adsorption to the crystal lattice by having a positive contribution to the disjoining pressures when changing electrolyte concentration. This work extends the current knowledge base for dynamic water injection design by determining the effect of salt concentration on surface electrostatics. ",
keywords = "calcite, dolomite, stearic acid, zeta potential, electric double layer, disjoining pressure, wettability mechanism, low salinity waterflooding",
author = "Derkani, {Maryam H.} and Fletcher, {Ashleigh J.} and Maxim Fedorov and Wael Abdallah and Bastian Sauerer and James Anderson and Zhang, {Zhenyu J.}",
year = "2019",
month = oct,
day = "31",
doi = "10.3390/colloids3040062",
language = "English",
volume = "3",
journal = "Colloids and Interfaces",
issn = "2504-5377",
publisher = "MDPI",
number = "4",

}

RIS

TY - JOUR

T1 - Mechanisms of Surface Charge Modification of Carbonates in Aqueous Electrolyte Solutions

AU - Derkani, Maryam H.

AU - Fletcher, Ashleigh J.

AU - Fedorov, Maxim

AU - Abdallah, Wael

AU - Sauerer, Bastian

AU - Anderson, James

AU - Zhang, Zhenyu J.

PY - 2019/10/31

Y1 - 2019/10/31

N2 - The influence of different types of salts (NaCl, CaCl 2 , MgCl 2 , NaHCO 3 , and Na 2 SO 4 ) on the surface characteristics of unconditioned calcite and dolomite particles, and conditioned with stearic acid, was investigated. This study used zeta potential measurements to gain fundamental understanding of physico-chemical mechanisms involved in surface charge modification of carbonate minerals in the presence of diluted salt solutions. By increasing the salt concentration of divalent cationic salt solution (CaCl 2 and MgCl 2 ), the zeta potential of calcite particles was altered, resulting in charge reversal from negative to positive, while dolomite particles maintained positive zeta potential. This is due to the adsorption of potential-determining cations (Ca 2+ and Mg 2+ ), and consequent changes in the structure of the diffuse layer, predominantly driven by coulombic interactions. On the other hand, chemical adsorption of potential-determining anions (HCO −3 and SO 2−4 ) maintained the negative zeta potential of carbonate surfaces and increased its magnitude up to 10 mM, before decreasing at higher salt concentrations. Physisorption of stearic acid molecules on the calcite and dolomite surfaces changed the zeta potential to more negative values in all solutions. It is argued that divalent cations (Ca 2+ and Mg 2+ ) would result in positive and neutral complexes with stearic acid molecules, which may result in strongly bound stearic acid films, whereas ions resulting in negative mineral surface charges (SO 2−4 and HCO −3 ) will cause stearic acid films to be loosely bound to the carbonate mineral surfaces. The suggested mechanism for surface charge modification of carbonates, in the presence of different ions, is changes in both distribution of ions in the diffuse layer and its structure as a result of ion adsorption to the crystal lattice by having a positive contribution to the disjoining pressures when changing electrolyte concentration. This work extends the current knowledge base for dynamic water injection design by determining the effect of salt concentration on surface electrostatics.

AB - The influence of different types of salts (NaCl, CaCl 2 , MgCl 2 , NaHCO 3 , and Na 2 SO 4 ) on the surface characteristics of unconditioned calcite and dolomite particles, and conditioned with stearic acid, was investigated. This study used zeta potential measurements to gain fundamental understanding of physico-chemical mechanisms involved in surface charge modification of carbonate minerals in the presence of diluted salt solutions. By increasing the salt concentration of divalent cationic salt solution (CaCl 2 and MgCl 2 ), the zeta potential of calcite particles was altered, resulting in charge reversal from negative to positive, while dolomite particles maintained positive zeta potential. This is due to the adsorption of potential-determining cations (Ca 2+ and Mg 2+ ), and consequent changes in the structure of the diffuse layer, predominantly driven by coulombic interactions. On the other hand, chemical adsorption of potential-determining anions (HCO −3 and SO 2−4 ) maintained the negative zeta potential of carbonate surfaces and increased its magnitude up to 10 mM, before decreasing at higher salt concentrations. Physisorption of stearic acid molecules on the calcite and dolomite surfaces changed the zeta potential to more negative values in all solutions. It is argued that divalent cations (Ca 2+ and Mg 2+ ) would result in positive and neutral complexes with stearic acid molecules, which may result in strongly bound stearic acid films, whereas ions resulting in negative mineral surface charges (SO 2−4 and HCO −3 ) will cause stearic acid films to be loosely bound to the carbonate mineral surfaces. The suggested mechanism for surface charge modification of carbonates, in the presence of different ions, is changes in both distribution of ions in the diffuse layer and its structure as a result of ion adsorption to the crystal lattice by having a positive contribution to the disjoining pressures when changing electrolyte concentration. This work extends the current knowledge base for dynamic water injection design by determining the effect of salt concentration on surface electrostatics.

KW - calcite

KW - dolomite

KW - stearic acid

KW - zeta potential

KW - electric double layer

KW - disjoining pressure

KW - wettability mechanism

KW - low salinity waterflooding

U2 - 10.3390/colloids3040062

DO - 10.3390/colloids3040062

M3 - Article

VL - 3

JO - Colloids and Interfaces

JF - Colloids and Interfaces

SN - 2504-5377

IS - 4

M1 - 62

ER -