In-situ measurements of stress during thermal shock in clad pressure vessel steel using synchrotron X-ray diffraction

Research output: Contribution to journalArticlepeer-review

Authors

  • Sam Oliver
  • Chris Simpson
  • Christina Reinhard
  • Martin Pavier
  • Mahmoud Mostafavi

Colleges, School and Institutes

External organisations

  • University of Bristol
  • Diamond Light Source

Abstract

Thermal shocks are an important incident in operation of a pressure vessel which can have a significant impact on the structural integrity of the vessel. Often experiments that consider the state of the vessel before and after the thermal shock are used to evaluate the effects of the thermal shock. The studies can be complemented by time-resolved numerical simulations, which may be validated against the final state of the vessel obtained experimentally, to infer the transient response of the material. The transient response is important as the material experiences the highest level of stress in a short period which can induce catastrophic failure. This paper reports time-resolved experimental quantification of strain in reactor pressure vessel material during thermal shock measured by in-situ synchrotron diffraction. Specimens were extracted from a plate of nuclear pressure vessel steel with a nickel alloy cladding deposited by overlay welding. The specimens, with and without cracks, were subjected to thermal loading by heating then rapidly quenching the cladding in cold water. Strains were measured during thermal loading at a point near the crack tip from which the stress state around the crack tip was calculated and compared with a transient finite element model of the experiment. It was found that the peak near-tip stress occurred within the first second after the onset of rapid cooling. It was demonstrated from experimental measurements that the peak stress intensity factor occurred during thermal shock, rather than under steady conditions before or after the thermal shock. It was shown that although the finite element simulation predicts the steady state condition of the material after thermal shock, its transient response dependents significantly on a number of inputs with high uncertainty, making its time-resolved results unreliable for high-fidelity integrity assessments.

Bibliographic note

Funding Information: Wood and the Engineering and Physical Sciences Research Council funded this work. Peter James and John Sharples at Wood provided valuable advice and input. We are grateful to Wood for providing the material. Access to the I12 beamline was provide by Diamond Light Source under proposal number 16096. Andrew James and Megan Taylor of the University of Bristol assisted with the experiment at Diamond Light Source. Andrew James also measured the grain size in the material. MM acknowledges the support of The Royal Academy of Engineering through a Senior Research Fellowship. Publisher Copyright: © 2020

Details

Original languageEnglish
Article number106136
Number of pages13
JournalInternational Journal of Mechanical Sciences
Volume192
Early online date8 Oct 2020
Publication statusPublished - 15 Feb 2021

Keywords

  • Cladding, Fracture, Synchrotron X-ray diffraction, Thermal shock, Thermal stress