TY - JOUR
T1 - Influence of phase composition and particle size of atomised Ni-Al alloy samples on the catalytic performance of Raney-type nickel catalysts
AU - Devred, F.
AU - Gieske, A.H.
AU - Bakker, J.W.
AU - Nieuwenhuys, B.E.
AU - Adkins, N.
AU - Dahlborg, U.
AU - Bao, C.M.
AU - Calvo-Dahlborg, M.
N1 - Copyright 2009 Elsevier B.V., All rights reserved.
PY - 2009/3/15
Y1 - 2009/3/15
N2 - Hydrogenation of citral has been investigated over Raney-type nickel catalysts prepared from various Ni-Al atomised alloys. These alloys differ in phase composition; in particular in the NiAl concentration. The starting alloys were prepared by gas atomisation or cast and crush process and subsequently activated by a conventional leaching process. The aim was to investigate the influence of the phase composition and the effect of the initial particle size of the alloys on the catalytic performance. It appears that the composition of the initial alloy plays an important role in the catalytic performance of the activated catalysts: catalysts prepared from atomised alloys that contain a higher volume fraction of NiAl in comparison to the standard 50-50 wt% (Ni-68.5 at.% Al) alloy exhibit higher activity. X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and BET measurements were used for surface analysis, bulk analysis and determination of the surface area, respectively. It is proposed that the amount of remaining metallic aluminium after activation influences the catalytic properties. As the concentration of aluminium in the activated catalysts is essentially the same at the near surface, the microstructure of the catalyst, with different concentrations of Al in the bulk may be the origin of the differences in catalytic performance. Advantages of the atomisation process over the traditional cast and crush process are demonstrated.
AB - Hydrogenation of citral has been investigated over Raney-type nickel catalysts prepared from various Ni-Al atomised alloys. These alloys differ in phase composition; in particular in the NiAl concentration. The starting alloys were prepared by gas atomisation or cast and crush process and subsequently activated by a conventional leaching process. The aim was to investigate the influence of the phase composition and the effect of the initial particle size of the alloys on the catalytic performance. It appears that the composition of the initial alloy plays an important role in the catalytic performance of the activated catalysts: catalysts prepared from atomised alloys that contain a higher volume fraction of NiAl in comparison to the standard 50-50 wt% (Ni-68.5 at.% Al) alloy exhibit higher activity. X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and BET measurements were used for surface analysis, bulk analysis and determination of the surface area, respectively. It is proposed that the amount of remaining metallic aluminium after activation influences the catalytic properties. As the concentration of aluminium in the activated catalysts is essentially the same at the near surface, the microstructure of the catalyst, with different concentrations of Al in the bulk may be the origin of the differences in catalytic performance. Advantages of the atomisation process over the traditional cast and crush process are demonstrated.
UR - http://www.scopus.com/inward/record.url?partnerID=yv4JPVwI&eid=2-s2.0-59749084670&md5=137d5462bf437e21b461276379a81d35
U2 - 10.1016/j.apcata.2008.12.039
DO - 10.1016/j.apcata.2008.12.039
M3 - Article
AN - SCOPUS:59749084670
SN - 0926-860X
VL - 356
SP - 154
EP - 161
JO - Applied Catalysis A: General
JF - Applied Catalysis A: General
IS - 2
ER -