Experimental study on the heat transfer characteristics of a low melting point salt in a parabolic trough solar collector system

Yu-ting Wu, Shan-wei Liu, Ya-xuan Xiong, Chong-fang Ma, Yulong Ding

Research output: Contribution to journalArticlepeer-review

41 Citations (Scopus)
522 Downloads (Pure)

Abstract

An experimental system of parabolic trough solar collector and heat transfer was set up with a new molten salt employed as the heat transfer medium (with a melting point of 86 °C and a working temperature upper limit of 550 °C). The circulation of molten salts in the system took place over 1000 h. Experiments were conducted to obtain the heat loss of the Heat Collector Element (HCE), the total heat transfer coefficient of the water-to-salt heat exchanger, and the convective heat transfer coefficients for the low melting point molten salt in a circular tube. The results show that the thermal loss of the tested HCE is higher than that of the PTR70, and the thermal loss at the joints of the collector tube represents about 5% of the total loss in the entire tube. The total heat transfer coefficient of the water-to-salt heat exchanger was between 600 and 1200 W/(m2·k) in the ranges of 10,000 < Re < 21,000 and 9.5 < Pr < 12.2. The experimental data show good agreement with existing well-known correlations presented by the Sieder-Tate equation and the Gnielinski equation. This experimental study on heat loss from molten salt flow in a receiver tube will hopefully serve as a helpful reference for applications in parabolic trough systems.
Original languageEnglish
Pages (from-to)748-754
JournalApplied Thermal Engineering
Volume89
Early online date30 Jun 2015
DOIs
Publication statusPublished - 1 Oct 2015

Keywords

  • Low melting point molten salt
  • Trough solar collector system
  • Heat loss
  • Heat transfer coefficient

Fingerprint

Dive into the research topics of 'Experimental study on the heat transfer characteristics of a low melting point salt in a parabolic trough solar collector system'. Together they form a unique fingerprint.

Cite this