Estimating the hydraulic properties of the fracture network in a sandstone aquifer

Research output: Contribution to journalArticle

Authors

Colleges, School and Institutes

Abstract

The potential hydraulic behaviour of the fracture network in a major Triassic sandstone aquifer in the UK has been evaluated. The properties of the fracture network were determined using results from detailed scan line surveys at 10 sites, television and geophysical borehole logging, and packer testing. Six sets of discontinuities common to all sites were identified and statistically characterised (dip, strike, orientation, density, size, and estimated transmissivity). A discrete fracture network model was then used stochastically to investigate the properties of the network. In general, the network is poorly connected: it is estimated that 9% of the discontinuities intersecting boreholes are transmissive. The hydraulic behaviour of the network is generally dominated by one sub-horizontal bedding plane fracture set, although when present, a relatively infrequent north-south striking, sub-vertical set modifies the bulk flow properties significantly. Ignoring this latter set, the network's minimum representative volume is about 35 x 35 x 35 m. The upscaled permeability is anisotropic, being typically 23 times greater in the horizontal than in the vertical. Tortuosity in the north-south direction is around 1.6.

Details

Original languageEnglish
Pages (from-to)38-57
Number of pages20
JournalJournal of Contaminant Hydrology
Volume93
Publication statusPublished - 15 Aug 2007

Keywords

  • fractured rock, effective permeability, tortuosity, sandstone