Electrical resistivity tomography array comparisons to detect cleared-wall foundations in brownfield sites

Research output: Contribution to journalArticle

Authors

Colleges, School and Institutes

External organisations

  • Keele University

Abstract

Electrical resistivity surveys are commonly used to detect and characterise near-surface buried objects in commercial developments of brownfield sites. 2D ERT profiles arrays predominate in such surveys due to their relatively rapid deployment, good penetration depths and fast data collection rates. However, there is a need to test the optimum array types in such surveys. A scaled-model was used to simulate a large cleared-building wall foundation in gravel-fill at a test facility, before multiple 2D ERT profiles were acquired using different array configurations. Results were used to generate 2D resistivity models using both least-square smoothness-constraint and robust inversion. 2D profile array comparisons showed that the Wenner and dipole-dipole arrays were the best in detecting the cleared-wall foundation, although dipole-dipole arrays better delineated the top of the wall foundation. This study suggests that both Wenner and dipole-dipole array configurations should be utilised to detect buried wall foundations for 2D resistivity surveys.

Bibliographic note

© 2019 The Author(s). Published by The Geological Society of London. All rights reserved

Details

Original languageEnglish
Number of pages32
JournalQuarterly Journal of Engineering Geology and Hydrogeology
Publication statusPublished - 13 Apr 2019

Keywords

  • near-surface geophysics, brownfield sites, electrical resistivity arrays, wall foundations, ERT, inversion