Effect of ECAP on microstructure and mechanical properties of ZE41 magnesium alloy

Rengen Ding, Chuanwei Chung, Yu-Lung Chiu, Paul Lyon

Research output: Contribution to journalArticlepeer-review

38 Citations (Scopus)

Abstract

A ZE41 alloy was processed by equal channel angular pressing (ECAP) at 320 degrees C and its microstructure and tensile properties were evaluated. It has been observed that the ECAP refines both the grains and precipitates, thus modifying the strength and ductility of the alloy. The sample after 6 passes of ECAP processing has a yield stress of 230 MPa and elongation of 20%, compared with 160 MPa and 8% prior to the ECAP. Two types of twinning, viz. {1 0 (1) over bar 2} and (1 0 (1) over bar 1), were observed. Crown Copyright (C) 2010 Published by Elsevier B.V. All rights reserved.
Original languageEnglish
Pages (from-to)3777-3784
Number of pages8
JournalMaterials Science and Engineering A
Volume527
Issue number16-17
DOIs
Publication statusPublished - 1 Jun 2010

Keywords

  • ZE41
  • ECAP
  • Microstructure
  • Mechanical properties

Fingerprint

Dive into the research topics of 'Effect of ECAP on microstructure and mechanical properties of ZE41 magnesium alloy'. Together they form a unique fingerprint.

Cite this