Dynamic monitoring of curing photoactive resins: A methods comparison

Research output: Contribution to journalArticle

Standard

Dynamic monitoring of curing photoactive resins: A methods comparison. / Rosentritt, M; Shortall, Adrian; Palin, William.

In: Dental Materials, Vol. 26, No. 6, 01.06.2010, p. 565-570.

Research output: Contribution to journalArticle

Harvard

APA

Vancouver

Author

Bibtex

@article{e99d7b2cd93e45039041a4fa374e6736,
title = "Dynamic monitoring of curing photoactive resins: A methods comparison",
abstract = "Ojective. The aim of this investigation was to determine reaction enthalpy, ion viscosity and curing light transmission changes of unfilled methacrylate-based systems in order to compare methods that monitor photoactive resin polymerization. Methods. Photoinitiator (0.2%, w/v, camphoroquinone), accelerator (0.3%, w/v, amine) and inhibitor (ranging from 0 to 1%, w/v, butylated hydroxytoluene, BHT) were incorporated in an experimental BisGMA/TEGDMA co-monomer mixture (50/50, w/v). The concentration of BHT was varied from 0.00, 0.01, 0.05, 0.10, 0.50 to 1.00% (w/v). Light transmission (LT), reaction enthalpy (UV-differential scanning calorimetry, DSC), and ion viscosity (dielectrical analysis, DEA) were determined during irradiation of the resins (40 s; halogen light curing-unit). Statistical analysis was performed using two-way ANOVA followed by post hoc tests (alpha = 0.05). Curve fitting and regression calculation were done. Results. There was no significant change in the time to reach the maximum rate of polymerization (reaction time) in the individual systems up to a BHT concentration of 0.05% (P > 0.05). Starting at a concentration of 0.10% BHT an increase in time of reaction could be found from 4.0 s (LT), 4.07 s (DEA) and 4.9 s (DSC) to a maximum of 7.4 s (DSC), 9.43 s (DEA) and 9.67 s (LT). Linear increase (y = 5.588 x x) in time to the maximum speed of reaction could be found with a correlation of R-2 = 0.992. Conclusions. The speed of polymerization reaction is strongly influenced by BHT concentration. The linear relationship should allow for the prediction of the speed of reaction during blending of a methacrylate-based resin. The three test systems allow for monitoring the complex polymerization kinetics of unfilled methacrylate-based systems. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.",
keywords = "DEA, BHT, Photoactive resin, Inhibitor, Real-time reaction, Light transmission, DSC",
author = "M Rosentritt and Adrian Shortall and William Palin",
year = "2010",
month = jun,
day = "1",
doi = "10.1016/j.dental.2010.02.006",
language = "English",
volume = "26",
pages = "565--570",
journal = "Dental Materials",
issn = "0109-5641",
publisher = "Elsevier",
number = "6",

}

RIS

TY - JOUR

T1 - Dynamic monitoring of curing photoactive resins: A methods comparison

AU - Rosentritt, M

AU - Shortall, Adrian

AU - Palin, William

PY - 2010/6/1

Y1 - 2010/6/1

N2 - Ojective. The aim of this investigation was to determine reaction enthalpy, ion viscosity and curing light transmission changes of unfilled methacrylate-based systems in order to compare methods that monitor photoactive resin polymerization. Methods. Photoinitiator (0.2%, w/v, camphoroquinone), accelerator (0.3%, w/v, amine) and inhibitor (ranging from 0 to 1%, w/v, butylated hydroxytoluene, BHT) were incorporated in an experimental BisGMA/TEGDMA co-monomer mixture (50/50, w/v). The concentration of BHT was varied from 0.00, 0.01, 0.05, 0.10, 0.50 to 1.00% (w/v). Light transmission (LT), reaction enthalpy (UV-differential scanning calorimetry, DSC), and ion viscosity (dielectrical analysis, DEA) were determined during irradiation of the resins (40 s; halogen light curing-unit). Statistical analysis was performed using two-way ANOVA followed by post hoc tests (alpha = 0.05). Curve fitting and regression calculation were done. Results. There was no significant change in the time to reach the maximum rate of polymerization (reaction time) in the individual systems up to a BHT concentration of 0.05% (P > 0.05). Starting at a concentration of 0.10% BHT an increase in time of reaction could be found from 4.0 s (LT), 4.07 s (DEA) and 4.9 s (DSC) to a maximum of 7.4 s (DSC), 9.43 s (DEA) and 9.67 s (LT). Linear increase (y = 5.588 x x) in time to the maximum speed of reaction could be found with a correlation of R-2 = 0.992. Conclusions. The speed of polymerization reaction is strongly influenced by BHT concentration. The linear relationship should allow for the prediction of the speed of reaction during blending of a methacrylate-based resin. The three test systems allow for monitoring the complex polymerization kinetics of unfilled methacrylate-based systems. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

AB - Ojective. The aim of this investigation was to determine reaction enthalpy, ion viscosity and curing light transmission changes of unfilled methacrylate-based systems in order to compare methods that monitor photoactive resin polymerization. Methods. Photoinitiator (0.2%, w/v, camphoroquinone), accelerator (0.3%, w/v, amine) and inhibitor (ranging from 0 to 1%, w/v, butylated hydroxytoluene, BHT) were incorporated in an experimental BisGMA/TEGDMA co-monomer mixture (50/50, w/v). The concentration of BHT was varied from 0.00, 0.01, 0.05, 0.10, 0.50 to 1.00% (w/v). Light transmission (LT), reaction enthalpy (UV-differential scanning calorimetry, DSC), and ion viscosity (dielectrical analysis, DEA) were determined during irradiation of the resins (40 s; halogen light curing-unit). Statistical analysis was performed using two-way ANOVA followed by post hoc tests (alpha = 0.05). Curve fitting and regression calculation were done. Results. There was no significant change in the time to reach the maximum rate of polymerization (reaction time) in the individual systems up to a BHT concentration of 0.05% (P > 0.05). Starting at a concentration of 0.10% BHT an increase in time of reaction could be found from 4.0 s (LT), 4.07 s (DEA) and 4.9 s (DSC) to a maximum of 7.4 s (DSC), 9.43 s (DEA) and 9.67 s (LT). Linear increase (y = 5.588 x x) in time to the maximum speed of reaction could be found with a correlation of R-2 = 0.992. Conclusions. The speed of polymerization reaction is strongly influenced by BHT concentration. The linear relationship should allow for the prediction of the speed of reaction during blending of a methacrylate-based resin. The three test systems allow for monitoring the complex polymerization kinetics of unfilled methacrylate-based systems. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

KW - DEA

KW - BHT

KW - Photoactive resin

KW - Inhibitor

KW - Real-time reaction

KW - Light transmission

KW - DSC

U2 - 10.1016/j.dental.2010.02.006

DO - 10.1016/j.dental.2010.02.006

M3 - Article

C2 - 20226516

VL - 26

SP - 565

EP - 570

JO - Dental Materials

JF - Dental Materials

SN - 0109-5641

IS - 6

ER -