Ceramic conversion treatment of zirconium alloys to combat corrosion wear

Research output: Contribution to journalArticle

Colleges, School and Institutes

Abstract

A series of ceramic conversion treatments have been conducted on Zr702 and Zr705 zirconium alloys by thermal oxidation at temperatures ranging from 400 to 700 degrees C for 3-30 h. A wide range of material characterisation techniques were used to investigate the microstructure, composition, phase constituent, load bearing capacity and wear properties of the surface treated zirconium alloys. Experimental results show that after ceramic conversion treatments, the surfaces of Zr702 and Zr705 alloys can be converted to a ceramic layer consisting of alpha-ZrO2 and beta-ZrO2; the optimal ceramic conversion treatment conditions for Zr702 and Zr705 alloys are 600 degrees C/10 h and 600 degrees C/3 h respectively; Zr705 alloy has a better response to ceramic conversion treatment than Zr702; and the wear resistance of the optimally treated zirconium alloys can be improved by more than 200 times. The wear mechanisms of both untreated and ceramic conversion treated zirconium alloys are discussed. The dominant wear mechanisms changed from severe adhesive wear for the untreated zirconium alloys to mild abrasive wear for the ceramic conversion treated materials.

Details

Original languageEnglish
Pages (from-to)30-36
Number of pages7
JournalSurface Engineering
Volume26
Issue number1-2
Publication statusPublished - 1 Feb 2010

Keywords

  • Characterisation, Zirconium alloy, Wear, Ceramic conversion treatment