A sensitivity analysis of the effect of pumping parameters on hydraulic fracture networks and local stresses during Shale Gas operations

Research output: Contribution to journalArticle

Standard

A sensitivity analysis of the effect of pumping parameters on hydraulic fracture networks and local stresses during Shale Gas operations. / Westwood, Rachel; Toon, Samuel ; Cassidy, Nigel.

In: Fuel, Vol. 203, 01.09.2017, p. 843-852.

Research output: Contribution to journalArticle

Harvard

APA

Vancouver

Author

Bibtex

@article{3b209708f97849e7a654996c4cfa55db,
title = "A sensitivity analysis of the effect of pumping parameters on hydraulic fracture networks and local stresses during Shale Gas operations",
abstract = "The shale gas industry has significant impact on economies around the world, however, it is not without risk. One of the primary concerns is felt seismicity and recent earthquakes, caused by fault reactivation related to hydraulic fracturing operations, have escalated uncertainty about hydraulic fracturing methods. Mitigating these risks is essential for restoring public confidence in this controversial industry. We investigate the effect that changing two operational parameters (flow rate and pumping time) and differential pressure has on the flow distance, fracture network area and the minimum lateral distance that hydraulic fracturing should occur from a pre-existing fault in order not to reactivate it (lateral respect distance); thus reducing the risk of felt seismicity. Sensitivity analyses are conducted using a Monte Carlo approach. The lateral respect distance is obtained from calculations of the Coulomb stress change of the rock surrounding the injection stage, for four stress threshold values obtained from the literature. Results show that the flow rate has the smallest rate of change for fracture area (3700 m2 per 0.01 m3/s) and flow distance (8.3 m per 0.01 m3/s). We find that differential pressure has the largest impact on stimulated fracture area, when less than 2 MPa, at 31,029 m2/MPa. The pumping time has the most significant effect on the flow distance (48 m/hr) and the stress threshold value the most significant effect on the lateral respect distance. This study suggests that to reduce the lateral distance, a compromise is required between flow distance and fracture area. The results obtained by this research provide invaluable guidance for operational practice in determining the potential area of the induced fracture network and generated stress field under realistic hydraulic fracturing conditions, an important aspect for risk assessments.",
keywords = "Hydraulic fracturing, Numerical Modelling, Pumping Parameters, Stress, Shale Gas, Faulting",
author = "Rachel Westwood and Samuel Toon and Nigel Cassidy",
year = "2017",
month = "9",
day = "1",
doi = "10.1016/j.fuel.2017.05.004",
language = "English",
volume = "203",
pages = "843--852",
journal = "Fuel",
issn = "0016-2361",
publisher = "Elsevier Korea",

}

RIS

TY - JOUR

T1 - A sensitivity analysis of the effect of pumping parameters on hydraulic fracture networks and local stresses during Shale Gas operations

AU - Westwood, Rachel

AU - Toon, Samuel

AU - Cassidy, Nigel

PY - 2017/9/1

Y1 - 2017/9/1

N2 - The shale gas industry has significant impact on economies around the world, however, it is not without risk. One of the primary concerns is felt seismicity and recent earthquakes, caused by fault reactivation related to hydraulic fracturing operations, have escalated uncertainty about hydraulic fracturing methods. Mitigating these risks is essential for restoring public confidence in this controversial industry. We investigate the effect that changing two operational parameters (flow rate and pumping time) and differential pressure has on the flow distance, fracture network area and the minimum lateral distance that hydraulic fracturing should occur from a pre-existing fault in order not to reactivate it (lateral respect distance); thus reducing the risk of felt seismicity. Sensitivity analyses are conducted using a Monte Carlo approach. The lateral respect distance is obtained from calculations of the Coulomb stress change of the rock surrounding the injection stage, for four stress threshold values obtained from the literature. Results show that the flow rate has the smallest rate of change for fracture area (3700 m2 per 0.01 m3/s) and flow distance (8.3 m per 0.01 m3/s). We find that differential pressure has the largest impact on stimulated fracture area, when less than 2 MPa, at 31,029 m2/MPa. The pumping time has the most significant effect on the flow distance (48 m/hr) and the stress threshold value the most significant effect on the lateral respect distance. This study suggests that to reduce the lateral distance, a compromise is required between flow distance and fracture area. The results obtained by this research provide invaluable guidance for operational practice in determining the potential area of the induced fracture network and generated stress field under realistic hydraulic fracturing conditions, an important aspect for risk assessments.

AB - The shale gas industry has significant impact on economies around the world, however, it is not without risk. One of the primary concerns is felt seismicity and recent earthquakes, caused by fault reactivation related to hydraulic fracturing operations, have escalated uncertainty about hydraulic fracturing methods. Mitigating these risks is essential for restoring public confidence in this controversial industry. We investigate the effect that changing two operational parameters (flow rate and pumping time) and differential pressure has on the flow distance, fracture network area and the minimum lateral distance that hydraulic fracturing should occur from a pre-existing fault in order not to reactivate it (lateral respect distance); thus reducing the risk of felt seismicity. Sensitivity analyses are conducted using a Monte Carlo approach. The lateral respect distance is obtained from calculations of the Coulomb stress change of the rock surrounding the injection stage, for four stress threshold values obtained from the literature. Results show that the flow rate has the smallest rate of change for fracture area (3700 m2 per 0.01 m3/s) and flow distance (8.3 m per 0.01 m3/s). We find that differential pressure has the largest impact on stimulated fracture area, when less than 2 MPa, at 31,029 m2/MPa. The pumping time has the most significant effect on the flow distance (48 m/hr) and the stress threshold value the most significant effect on the lateral respect distance. This study suggests that to reduce the lateral distance, a compromise is required between flow distance and fracture area. The results obtained by this research provide invaluable guidance for operational practice in determining the potential area of the induced fracture network and generated stress field under realistic hydraulic fracturing conditions, an important aspect for risk assessments.

KW - Hydraulic fracturing

KW - Numerical Modelling

KW - Pumping Parameters

KW - Stress

KW - Shale Gas

KW - Faulting

U2 - 10.1016/j.fuel.2017.05.004

DO - 10.1016/j.fuel.2017.05.004

M3 - Article

VL - 203

SP - 843

EP - 852

JO - Fuel

JF - Fuel

SN - 0016-2361

ER -