A reconfigurable CMOS sensor for tracking, pre-shower and digital electromagnetic calorimetry

Research output: Contribution to journalArticlepeer-review

Standard

A reconfigurable CMOS sensor for tracking, pre-shower and digital electromagnetic calorimetry. / Allport, P.; Benhammadi, S.; Bosley, R.; Dopke, J.; Flynn, S.; Freeman, P.; Gonella, L.; Guerrini, N.; Kopsalis, I.; Nikolopoulos, K.; Phillips, P.; Price, T.; Scott, A.; Sedgwick, I.; Villani, E. G.; Warren, M.; Watson, N.; Wilson, F.; Winter, A.; Worm, S.; Zhang, Z.

In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 978, 164459, 21.10.2020.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Author

Bibtex

@article{ca6e17b1abbc415b9b5038fb1766ad95,
title = "A reconfigurable CMOS sensor for tracking, pre-shower and digital electromagnetic calorimetry",
abstract = "Recent advances in CMOS imaging sensor technology have led to designs able to withstand much higher radiation levels, up to those required at hadron colliders for all but the innermost layers. Also, with stitching, wafer scale devices have been fabricated on the same process as used for the prototypes described in this submission, for applications such as, for example, direct electron detection in transmission electron microscopy. A small sensor prototype has been designed and fabricated in the TowerJazz 180 nm CMOS imaging process. The prototype has a pixel matrix of 64x64 pixels with a pitch of 55 x 55μm and reads out using fast logic at 40 MHz. Each pixel contains four collection electrodes, trimming logic, pre-amplifier, shaper and discriminator with digital output. It can be reconfigured to function as either a binary short strip sensor, for particle tracking including as a pre-shower, or as a pad sensor, counting the number of pixels above threshold for digital calorimetry. As well as providing a seamless transition from outer tracking to EM calorimetry, for optimal use of particle flow algorithms, digital calorimetry also can give excellent energy resolution. This concept is proposed as a possible option for future digital calorimeters able to read-out at LHC collision rates with good radiation hardness and realisable in low cost commercial technologies for equipping large areas. Results on physics performance simulation in a FCC-hh context and the characterisation of the prototype sensor are presented. The summing logic is demonstrated and the analogue pixel performance is validated by illuminating a test pixel within the matrix with a laser of wavelength of 1064 nm. The absolute laser intensity is calibrated such that the injected charge is similar to that expected for a minimum ionising particle. The measured pre-amplifier and shaper signals are compared to Cadence simulations. Laser illuminations in the digital pixel area and the response measured using a threshold scan confirm successful digital functionality in strip and pad operation modes.",
keywords = "Calorimeters, CMOS, Particle physics, Sensors",
author = "P. Allport and S. Benhammadi and R. Bosley and J. Dopke and S. Flynn and P. Freeman and L. Gonella and N. Guerrini and I. Kopsalis and K. Nikolopoulos and P. Phillips and T. Price and A. Scott and I. Sedgwick and Villani, {E. G.} and M. Warren and N. Watson and F. Wilson and A. Winter and S. Worm and Z. Zhang",
year = "2020",
month = oct,
day = "21",
doi = "10.1016/j.nima.2020.164459",
language = "English",
volume = "978",
journal = "Nuclear Instruments & Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors",
issn = "0168-9002",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - A reconfigurable CMOS sensor for tracking, pre-shower and digital electromagnetic calorimetry

AU - Allport, P.

AU - Benhammadi, S.

AU - Bosley, R.

AU - Dopke, J.

AU - Flynn, S.

AU - Freeman, P.

AU - Gonella, L.

AU - Guerrini, N.

AU - Kopsalis, I.

AU - Nikolopoulos, K.

AU - Phillips, P.

AU - Price, T.

AU - Scott, A.

AU - Sedgwick, I.

AU - Villani, E. G.

AU - Warren, M.

AU - Watson, N.

AU - Wilson, F.

AU - Winter, A.

AU - Worm, S.

AU - Zhang, Z.

PY - 2020/10/21

Y1 - 2020/10/21

N2 - Recent advances in CMOS imaging sensor technology have led to designs able to withstand much higher radiation levels, up to those required at hadron colliders for all but the innermost layers. Also, with stitching, wafer scale devices have been fabricated on the same process as used for the prototypes described in this submission, for applications such as, for example, direct electron detection in transmission electron microscopy. A small sensor prototype has been designed and fabricated in the TowerJazz 180 nm CMOS imaging process. The prototype has a pixel matrix of 64x64 pixels with a pitch of 55 x 55μm and reads out using fast logic at 40 MHz. Each pixel contains four collection electrodes, trimming logic, pre-amplifier, shaper and discriminator with digital output. It can be reconfigured to function as either a binary short strip sensor, for particle tracking including as a pre-shower, or as a pad sensor, counting the number of pixels above threshold for digital calorimetry. As well as providing a seamless transition from outer tracking to EM calorimetry, for optimal use of particle flow algorithms, digital calorimetry also can give excellent energy resolution. This concept is proposed as a possible option for future digital calorimeters able to read-out at LHC collision rates with good radiation hardness and realisable in low cost commercial technologies for equipping large areas. Results on physics performance simulation in a FCC-hh context and the characterisation of the prototype sensor are presented. The summing logic is demonstrated and the analogue pixel performance is validated by illuminating a test pixel within the matrix with a laser of wavelength of 1064 nm. The absolute laser intensity is calibrated such that the injected charge is similar to that expected for a minimum ionising particle. The measured pre-amplifier and shaper signals are compared to Cadence simulations. Laser illuminations in the digital pixel area and the response measured using a threshold scan confirm successful digital functionality in strip and pad operation modes.

AB - Recent advances in CMOS imaging sensor technology have led to designs able to withstand much higher radiation levels, up to those required at hadron colliders for all but the innermost layers. Also, with stitching, wafer scale devices have been fabricated on the same process as used for the prototypes described in this submission, for applications such as, for example, direct electron detection in transmission electron microscopy. A small sensor prototype has been designed and fabricated in the TowerJazz 180 nm CMOS imaging process. The prototype has a pixel matrix of 64x64 pixels with a pitch of 55 x 55μm and reads out using fast logic at 40 MHz. Each pixel contains four collection electrodes, trimming logic, pre-amplifier, shaper and discriminator with digital output. It can be reconfigured to function as either a binary short strip sensor, for particle tracking including as a pre-shower, or as a pad sensor, counting the number of pixels above threshold for digital calorimetry. As well as providing a seamless transition from outer tracking to EM calorimetry, for optimal use of particle flow algorithms, digital calorimetry also can give excellent energy resolution. This concept is proposed as a possible option for future digital calorimeters able to read-out at LHC collision rates with good radiation hardness and realisable in low cost commercial technologies for equipping large areas. Results on physics performance simulation in a FCC-hh context and the characterisation of the prototype sensor are presented. The summing logic is demonstrated and the analogue pixel performance is validated by illuminating a test pixel within the matrix with a laser of wavelength of 1064 nm. The absolute laser intensity is calibrated such that the injected charge is similar to that expected for a minimum ionising particle. The measured pre-amplifier and shaper signals are compared to Cadence simulations. Laser illuminations in the digital pixel area and the response measured using a threshold scan confirm successful digital functionality in strip and pad operation modes.

KW - Calorimeters

KW - CMOS

KW - Particle physics

KW - Sensors

UR - http://www.scopus.com/inward/record.url?scp=85089020828&partnerID=8YFLogxK

U2 - 10.1016/j.nima.2020.164459

DO - 10.1016/j.nima.2020.164459

M3 - Article

AN - SCOPUS:85089020828

VL - 978

JO - Nuclear Instruments & Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors

JF - Nuclear Instruments & Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors

SN - 0168-9002

M1 - 164459

ER -