Xinhua Wu

(Former)

Publications

  1. Chapter › Research
  2. Published

    Developments and prospects for wrought and cast TiAl-based components

    Xinhua Wu, Dawei Hu, , Donka Novovic, Michael Loretto, & , 1 Jan 2005, Recent Advances of Niobium Containing Materials in Europe.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  3. Conference contribution › Research
  4. Published

    The influence of cooling rate and alloy composition on the formation of borides during solidification of boron-containing TiAl alloys

    Dawei Hu, Xinhua Wu, & , 2012, Ti-2011: Proceedings of the 12th World Conference on Titanium. Zhou, L., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing: Science Press, p. 1416-1420 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Paper › Research › Not peer-reviewed
  6. Published

    A preliminary study in Net Shape HIPping of a Ti burn-resistant alloy

    Xinhua Wu, Dawei Hu & Junfa Mei, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  7. Published
  8. Published

    Advances in optimisation of mechanical properties in cast TiAl alloys

    Dawei Hu, Xinhua Wu & Michael Loretto, 1 Jan 2004.

    Research output: Contribution to conference (unpublished)Paper

  9. Published

    Alloy and process development for cost-effective production of TiAl-based components

    Xinhua Wu, Dawei Hu & Michael Loretto, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  10. Published

    An investigation into the response of IMI 550 and Ti64 to high strain rate deformation

    Xinhua Wu, , & Michael Loretto, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  11. Published

    Defect analysis in Ti-based alloys deformed at different strain rates

    Xinhua Wu, Michael Loretto, & , 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  12. Published
  13. Published

    Direct Laser Fabrication of a burn-resistant alloy

    Xinhua Wu, Junfa Mei, & Michael Loretto, 1 Jan 2001.

    Research output: Contribution to conference (unpublished)Paper

  14. Published

    Direct laser fabrication of Ti-based alloys

    Junfa Mei, , , & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  15. Published
  16. Published

    Effect of body motion on propagation path gain at 60 GHz

    Yuriy Nechayev, Xinhua Wu, Costas Constantinou & Peter Hall, 1 Jan 2012, p. 3397-3401. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  17. Published

    Effect of carbon on oxygen segregation in Ti-25V-15Cr-2Al(wt%) alloys

    Tiesheng Rong, Dawei Hu, Yue Li, Ian Jones, Xinhua Wu & Michael Loretto, 1 Jan 2002, p. 691-692. 2 p.

    Research output: Contribution to conference (unpublished)Paper

  18. Published

    Effects of carbon microstructure and mechanical properties of a eutectoid beta titanium alloy

    Ian Jones & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  19. Published

    Heat treatment of cast TiAl-based alloys

    Michael Loretto, Dawei Hu, Aijun Huang & Xinhua Wu, 1 Jan 2004.

    Research output: Contribution to conference (unpublished)Paper

  20. Published

    Microscopic analysis of the segregation in direct laser fabrication (DLF) of alloys

    Junfa Mei, & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  21. Published

    Microstructure and mechanical properties of a laser fabricated Ti alloy

    Xinhua Wu, Junfa Mei, & , 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  22. Published

    Microstructure of Laser Fabricated Ti-6AL-4V Samples

    Junfa Mei, Xinhua Wu & Michael Loretto, 1 Jan 2001, p. 213-218. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  23. Published
  24. Published

    Modelling of the thermal history of components produced by direct laser fabrication

    Junfa Mei, Jianguo Lin & Xinhua Wu, 1 Jan 2003, p. 131-135. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  25. Published

    Modelling the thermal history of components produced by direct laser fabrication

    Junfa Mei, Jianguo Lin & Xinhua Wu, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  26. Published

    Net Shape manufacturing of porous titanium implants using direct laser fabrication

    Junfa Mei & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  27. Published

    Overview of TiAl alloy and processing development

    Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  28. Published

    Pre-yield cracking in TiAl alloys

    Xinhua Wu & Dawei Hu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  29. Published

    Precipitation in carbon-doped Ti-15V-3Cr-3Sn-3Al

    Dawei Hu, , & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  30. Published

    Preliminary estimate for observability of 60 GHz wireless body area networks

    Xinhua Wu, Yuriy Nechayev, Costas Constantinou, Peter Hall, , , & , 1 Jan 2012, p. 110-111. 2 p.

    Research output: Contribution to conference (unpublished)Paper

  31. Published
  32. Published
  33. Published

    Rapid manufacture of burn-resistant Ti components using Direct Laser Fabrication (DLF)

    Xinhua Wu, Michael Loretto, & , 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  34. Published

    Recent advances in TiAl alloy development for casting

    Xinhua Wu, Dawei Hu & Michael Loretto, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  35. Published

    Some recent work on alloy and process development Ti and TiAl alloys

    Michael Loretto, Dawei Hu & Xinhua Wu, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  36. Published

    Some recent work on alloy and process development of Ti and TiAl-based alloys

    Xinhua Wu, Dawei Hu, Junfa Mei & Michael Loretto, 1 Jan 2003, p. 145-152. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  37. Published

    Some recent work on alloy and process devepment Ti and TiAl alloys

    Xinhua Wu, Dawei Hu, Junfa Mei & Michael Loretto, 1 Jan 2003, p. 145-152. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  38. Published

    Tensile Ductility of Cast TiAl Alloys

    Dawei Hu & Xinhua Wu, 1 Jan 2010, p. 1336-1341. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  39. Published

    The Effects of Laser Processing Conditions on the Microstructure of Ti6Al4V Alloy

    Junfa Mei, Xinhua Wu & Michael Loretto, 1 Jan 2001, p. 541. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  40. Published

    The Microstructural Study of a Direct Laser Deposited Ti Alloy

    Xinhua Wu, Junfa Mei, Michael Loretto & , 1 Jan 2001, p. 201-206. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  41. Published
  42. Published

    The defect structure in Ti-6Al-4V and Timetal 550 subjected to medium and high strain rate deformation

    Xinhua Wu, Michael Loretto, , & , 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  43. Published

    The effects of thermal history on microstructures of direct laser fabricated Ti-6Al-4V alloy

    Liang Qian, Junfa Mei & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  44. Published

    The influence of microstructure and residual stress on pre-yield cracking in TiAl-based alloys

    Dawei Hu, Michael Loretto, , , & Xinhua Wu, 1 Jan 2003, p. 1655-1659. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  45. Published
  46. Published

    The influence of oxygen and carbon-content on aging of Ti-15-3

    Dawei Hu, Michael Loretto & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  47. Published
  48. Published

    The influence of surface layer on the properties of HIPped Ti6Al4V

    Weixing Yuan, Junfa Mei, , & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  49. Published

    The influence of surface treatment on pre-yeild cracking in TiAl-based alloys

    Dawei Hu, Michael Loretto, , , & Xinhua Wu, 1 Jan 2003, p. 1655-1660. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  50. Published
  51. Published

    The microstructure of laser fabricated Ti6Al4V

    Junfa Mei & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  52. Article › Research › Not peer-reviewed
  53. Published

    A single step centrifugal casting TiAl automotive valves

    Michael Loretto & Xinhua Wu, 1 Sep 2005, In: Intermetallics. 13, 9, p. 925-928 4 p.

    Research output: Contribution to journalArticle

  54. Published

    Advances in optimisation of mechanical properties in cast TiAl alloys

    Dawei Hu, Xinhua Wu & Michael Loretto, 1 Sep 2005, In: Intermetallics. 13, 9, p. 914-919 6 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 Next