Xinhua Wu

(Former)

Publications

  1. 2001
  2. Published

    Direct Laser Fabrication of a burn-resistant alloy

    Xinhua Wu, Junfa Mei, & Michael Loretto, 1 Jan 2001.

    Research output: Contribution to conference (unpublished)Paper

  3. Published
  4. Published

    Microstructure of Laser Fabricated Ti-6AL-4V Samples

    Junfa Mei, Xinhua Wu & Michael Loretto, 1 Jan 2001, p. 213-218. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  5. Published

    The Effects of Laser Processing Conditions on the Microstructure of Ti6Al4V Alloy

    Junfa Mei, Xinhua Wu & Michael Loretto, 1 Jan 2001, p. 541. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  6. Published

    The Microstructural Study of a Direct Laser Deposited Ti Alloy

    Xinhua Wu, Junfa Mei, Michael Loretto & , 1 Jan 2001, p. 201-206. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  7. Published
  8. Published
  9. Published
  10. Published
  11. 2002
  12. Published

    A preliminary study in Net Shape HIPping of a Ti burn-resistant alloy

    Xinhua Wu, Dawei Hu & Junfa Mei, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  13. Published

    An investigation into the response of IMI 550 and Ti64 to high strain rate deformation

    Xinhua Wu, , & Michael Loretto, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  14. Published

    Direct laser fabrication of Ti-based alloys

    Junfa Mei, , , & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  15. Published

    Effect of carbon on oxygen segregation in Ti-25V-15Cr-2Al(wt%) alloys

    Tiesheng Rong, Dawei Hu, Yue Li, Ian Jones, Xinhua Wu & Michael Loretto, 1 Jan 2002, p. 691-692. 2 p.

    Research output: Contribution to conference (unpublished)Paper

  16. Published

    Microscopic analysis of the segregation in direct laser fabrication (DLF) of alloys

    Junfa Mei, & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  17. Published

    Microstructure and mechanical properties of a laser fabricated Ti alloy

    Xinhua Wu, Junfa Mei, & , 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  18. Published
  19. Published

    Net Shape manufacturing of porous titanium implants using direct laser fabrication

    Junfa Mei & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  20. Published

    Pre-yield cracking in TiAl alloys

    Xinhua Wu & Dawei Hu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  21. Published

    Rapid manufacture of burn-resistant Ti components using Direct Laser Fabrication (DLF)

    Xinhua Wu, Michael Loretto, & , 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  22. Published
  23. Published
  24. Published

    The microstructure of laser fabricated Ti6Al4V

    Junfa Mei & Xinhua Wu, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  25. Published

    Direct laser fabrication and microstructure of a burn-resistant Ti alloy

    Xinhua Wu, , Junfa Mei & , 1 May 2002, In: Materials & Design. 23, p. 239-247 9 p.

    Research output: Contribution to journalArticle

  26. Published
  27. 2003
  28. Published
  29. Published

    Alloy and process development for cost-effective production of TiAl-based components

    Xinhua Wu, Dawei Hu & Michael Loretto, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  30. Published

    Defect analysis in Ti-based alloys deformed at different strain rates

    Xinhua Wu, Michael Loretto, & , 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  31. Published

    Modelling of the thermal history of components produced by direct laser fabrication

    Junfa Mei, Jianguo Lin & Xinhua Wu, 1 Jan 2003, p. 131-135. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  32. Published

    Modelling the thermal history of components produced by direct laser fabrication

    Junfa Mei, Jianguo Lin & Xinhua Wu, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  33. Published
  34. Published

    Recent advances in TiAl alloy development for casting

    Xinhua Wu, Dawei Hu & Michael Loretto, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  35. Published

    Some recent work on alloy and process development Ti and TiAl alloys

    Michael Loretto, Dawei Hu & Xinhua Wu, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  36. Published

    Some recent work on alloy and process development of Ti and TiAl-based alloys

    Xinhua Wu, Dawei Hu, Junfa Mei & Michael Loretto, 1 Jan 2003, p. 145-152. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  37. Published

    Some recent work on alloy and process devepment Ti and TiAl alloys

    Xinhua Wu, Dawei Hu, Junfa Mei & Michael Loretto, 1 Jan 2003, p. 145-152. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  38. Published

    The defect structure in Ti-6Al-4V and Timetal 550 subjected to medium and high strain rate deformation

    Xinhua Wu, Michael Loretto, , & , 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  39. Published

    The influence of microstructure and residual stress on pre-yield cracking in TiAl-based alloys

    Dawei Hu, Michael Loretto, , , & Xinhua Wu, 1 Jan 2003, p. 1655-1659. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  40. Published
  41. Published

    The influence of surface treatment on pre-yeild cracking in TiAl-based alloys

    Dawei Hu, Michael Loretto, , , & Xinhua Wu, 1 Jan 2003, p. 1655-1660. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  42. Published
  43. Published
  44. Published
  45. 2004
  46. Published

    Advances in optimisation of mechanical properties in cast TiAl alloys

    Dawei Hu, Xinhua Wu & Michael Loretto, 1 Jan 2004.

    Research output: Contribution to conference (unpublished)Paper

  47. Published

    Alloy and process development of TiAl

    Xinhua Wu, Dawei Hu & Michael Loretto, 1 Jan 2004, In: Journal of Materials Science. 39, 12, p. 3935-3940 6 p.

    Research output: Contribution to journalArticle

  48. Published
  49. Published

    Heat treatment of cast TiAl-based alloys

    Michael Loretto, Dawei Hu, Aijun Huang & Xinhua Wu, 1 Jan 2004.

    Research output: Contribution to conference (unpublished)Paper

  50. Published
  51. Published
  52. Published
  53. Published
  54. Published

    The role of surface condition, residual stress and microstructure on pre-yeild cracking in Ti44Al8Nb1B

    Xinhua Wu, Dawei Hu, , & Michael Loretto, 1 Mar 2004, In: Intermetallics. 12, 3, p. 281-287 7 p.

    Research output: Contribution to journalArticle

  55. Published

    Microstructure and properties of a laser fabricated burn-resistant Ti alloy

    Xinhua Wu, , Junfa Mei & , 1 Apr 2004, In: Materials & Design. 25, 2, p. 137-144 8 p.

    Research output: Contribution to journalArticle

  56. Published

    Microstructures of laser deposited Ti-6Al-4V

    Xinhua Wu, , Junfa Mei, , & , 1 Apr 2004, In: Materials & Design. 25, 2, p. 103-109 7 p.

    Research output: Contribution to journalArticle

  57. Published

    The influence of 0.2wt-%C carbon on the ageing response of Ti-15-3

    Dawei Hu, Michael Loretto & Xinhua Wu, 1 Jun 2004, In: Materials Science and Technology. 20, p. 756-763 8 p.

    Research output: Contribution to journalArticle

  58. Published
  59. 2005
  60. Published

    Developments and prospects for wrought and cast TiAl-based components

    Xinhua Wu, Dawei Hu, , Donka Novovic, Michael Loretto, & , 1 Jan 2005, Recent Advances of Niobium Containing Materials in Europe.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  61. Published

    Effects of carbon microstructure and mechanical properties of a eutectoid beta titanium alloy

    Ian Jones & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  62. Published
  63. Published

    Overview of TiAl alloy and processing development

    Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  64. Published

    Precipitation in carbon-doped Ti-15V-3Cr-3Sn-3Al

    Dawei Hu, , & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  65. Published

    The effects of thermal history on microstructures of direct laser fabricated Ti-6Al-4V alloy

    Liang Qian, Junfa Mei & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  66. Published

    The influence of oxygen and carbon-content on aging of Ti-15-3

    Dawei Hu, Michael Loretto & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  67. Published

    The influence of surface layer on the properties of HIPped Ti6Al4V

    Weixing Yuan, Junfa Mei, , & Xinhua Wu, 1 Jan 2005.

    Research output: Contribution to conference (unpublished)Paper

  68. Published

    Response of titanium alloys to high strain rate deformation

    Xinhua Wu, 1 Feb 2005, In: Materials Science and Technology. 21, 2, p. 225-231 7 p.

    Research output: Contribution to journalArticle

  69. Published

    TEM characterisation of Widmanstatten microstructures in TiAl-based alloys

    Dawei Hu, & Xinhua Wu, 1 Feb 2005, In: Intermetallics. 13, 2, p. 211-216 6 p.

    Research output: Contribution to journalArticle

  70. Published

    Microstructural refinement in cast TiAl alloys by solid state transformation

    Xinhua Wu & Dawei Hu, 1 Apr 2005, In: Scripta Materialia. 52, 8, p. 731-734 4 p.

    Research output: Contribution to journalArticle

  71. Published
  72. Published

    A single step centrifugal casting TiAl automotive valves

    Michael Loretto & Xinhua Wu, 1 Sep 2005, In: Intermetallics. 13, 9, p. 925-928 4 p.

    Research output: Contribution to journalArticle

  73. Published

    Advances in optimisation of mechanical properties in cast TiAl alloys

    Dawei Hu, Xinhua Wu & Michael Loretto, 1 Sep 2005, In: Intermetallics. 13, 9, p. 914-919 6 p.

    Research output: Contribution to journalArticle

  74. Published

    Gamma titanium aluminide-TNB

    Xinhua Wu, 1 Sep 2005, In: Intermetallics. 13, 9, p. 959-964 6 p.

    Research output: Contribution to journalArticle

  75. Published

    The influence of oxygen and carbon-content on aging of Ti-15-3

    Dawei Hu & Xinhua Wu, 1 Dec 2005, In: Journal of Materials Engineering and Performance. 14, 6, p. 728-734 7 p.

    Research output: Contribution to journalArticlepeer-review

  76. 2006
  77. Published
  78. Published
  79. Published

    Microstructural study of pre-yielding and pre-yield cracking in TiAl-based alloys

    Xinhua Wu, Hui Jiang, , Dawei Hu, & Michael Loretto, 1 Jan 2006, In: Intermetallics. 14, 1, p. 91-101 11 p.

    Research output: Contribution to journalArticle

  80. Published

    Pre-yielding and pre-yield cracking in TiAl-based alloys

    Dawei Hu, Aijun Huang, , & Xinhua Wu, 1 Jan 2006, In: Intermetallics. 14, 1, p. 82-90 9 p.

    Research output: Contribution to journalArticle

  81. Published

    Precipitation in carbon-doped Ti-15V-3Cr-3Sn-3Al

    Dawei Hu, , & Xinhua Wu, 1 Jan 2006, In: Rare Metal Materials and Engineering. 35, p. 225-229 5 p.

    Research output: Contribution to journalArticle

  82. Published

    Sulphide/phosphide precipitation associated with carbon saturation in Ti-15V-3Cr-3Sn-3Al-0.2C

    Dawei Hu, , & Xinhua Wu, 9 Mar 2006, In: Journal of Alloys and Compounds. 413, 1-2, p. 77-84 8 p.

    Research output: Contribution to journalArticle

  83. Published

    Influence of surface layer on properties of hipped Ti-6Al-V-4

    Junfa Mei, , , Michael Loretto, & Xinhua Wu, 1 May 2006, In: Materials Science and Technology. 22, 5, p. 553-560 8 p.

    Research output: Contribution to journalArticle

  84. Published
  85. Published

    Effect of boron and alpha grain size on massive transformation in Ti-46Al-8Nb alloys

    Dawei Hu, , Milorad Novovic & Xinhua Wu, 1 Jul 2006, In: Intermetallics. 14, 7, p. 818-825 8 p.

    Research output: Contribution to journalArticle

  86. Published

    The role of oxygen content and cooling rate on transformations in TiAl-based alloys

    Michael Loretto, Dawei Hu, & Xinhua Wu, 1 Jul 2006, In: Intermetallics. 14, 7, p. 838-847 10 p.

    Research output: Contribution to journalArticle

  87. Published

    Microstructure study of direct laser fabricated Ti alloys using powder and wire

    Fude Wang, Junfa Mei & Xinhua Wu, 1 Nov 2006, In: Applied Surface Science. 253, 3, p. 1424-1430 7 p.

    Research output: Contribution to journalArticle

  88. Published

    Analytical electron microscopy of C-free and C-containing Ti-15-3

    Xinhua Wu, , Qiang Li, , Dawei Hu & Michael Loretto, 1 Dec 2006, In: Acta Materialia. 54, 20, p. 5433-5448 16 p.

    Research output: Contribution to journalArticle

  89. 2007
  90. Published

    Ageing of C-containing and C-free Ti-15Cr and Ti-15-3

    Xinhua Wu, , Dawei Hu, Aijun Huang, & Michael Loretto, 1 Jan 2007, In: Materials Science Forum. 539-543, 3, p. 3595-3600 6 p.

    Research output: Contribution to journalArticle

  91. Published

    Beta phase decomposition in a TiAl alloy during continuous cooling

    Dawei Hu, Hui Jiang, Michael Loretto & Xinhua Wu, 1 Jan 2007, In: Materials Science Forum. 539-543, 3, p. 3625-3630 6 p.

    Research output: Contribution to journalArticle

  92. Published

    Compositionally graded Ti6A14V+TiC made by direct laser fabrication using powder and wire

    Fude Wang, Junfa Mei & Xinhua Wu, 1 Jan 2007, In: Materials & Design. 28, 7, p. 2040-2046 7 p.

    Research output: Contribution to journalArticle

  93. Published
  94. Published

    The influence of pressure on solid-state tansformations in Ti-46Al-8Nb

    Dawei Hu, Michael Loretto, Junfa Mei & Xinhua Wu, 1 Feb 2007, In: Scripta Materialia. 56, 4, p. 253-256 4 p.

    Research output: Contribution to journalArticle

  95. Published

    On the massive phase transformation regime in TiAl alloys: the alloying effect on massive/lamellar competition

    Dawei Hu, & Xinhua Wu, 1 Mar 2007, In: Intermetallics. 15, 3, p. 327-332 6 p.

    Research output: Contribution to journalArticle

  96. Published
  97. Published

    A review of laser fabrication of metallic engineering components and of materials

    Xinhua Wu, 1 Jun 2007, In: Materials Science and Technology. 23, 6, p. 631-640 10 p.

    Research output: Contribution to journalReview article

  98. Published

    The influence of interrupted cooling on the massive transformation in Ti46Al8Nb

    Dawei Hu, Michael Loretto & Xinhua Wu, 1 Sep 2007, In: Intermetallics. 15, 9, p. 1147-1155 9 p.

    Research output: Contribution to journalArticle

  99. 2008
  100. Published

    Direct laser fabrication of Ti6Al4V/TiB

    Fude Wang, Junfa Mei & Xinhua Wu, 1 Jan 2008, In: Journal of Materials Processing Technology. 195, 1-3, p. 321-326 6 p.

    Research output: Contribution to journalArticle

  101. Published
  102. 2009
  103. Published
  104. Published
  105. Published

    Characterization of microplasticity in TiAl-based alloys

    Dawei Hu, Xinhua Wu, Michael Loretto, & , 1 Mar 2009, In: Acta Materialia. 57, 5, p. 1357-1366 10 p.

    Research output: Contribution to journalArticle

  106. Published

    The formation of grain boundary gamma during cooling of Ti46Al8Nb

    Aijun Huang, Dawei Hu, Michael Loretto & Xinhua Wu, 1 May 2009, In: Intermetallics. 17, 5, p. 285-290 6 p.

    Research output: Contribution to journalArticle

  107. Published

    Thermal stability of the omega phase in Zr-containing TiAl alloys

    Dawei Hu & Xinhua Wu, 1 May 2009, In: Journal of Alloys and Compounds. 475, 1-2, p. 134-138 5 p.

    Research output: Contribution to journalArticle

  108. Published

    Oxidation-induced embrittlement of TiAl alloys

    Xinhua Wu, Aijun Huang, Dawei Hu & Michael Loretto, 1 Jul 2009, In: Intermetallics. 17, 7, p. 540-552 13 p.

    Research output: Contribution to journalArticle

  109. Published
  110. Published

    Net gains

    Xinhua Wu, 1 Nov 2009, In: Materials World. 17, 11, p. 34-36 3 p.

    Research output: Contribution to journalArticle

  111. 2010
  112. Published

    Tensile Ductility of Cast TiAl Alloys

    Dawei Hu & Xinhua Wu, 1 Jan 2010, p. 1336-1341. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  113. Published
  114. Published

    Nucleation of massive gamma during air cooling of Ti46Al8Ta

    Xinjiang Hao, , Nicholas Wain, Dawei Hu, Michael Loretto & Xinhua Wu, 1 May 2010, In: Intermetallics. 18, 5, p. 938-944 7 p.

    Research output: Contribution to journalArticle

  115. Published

    The influence of carbon on precipitation of alpha in Ti-5Al-5Mo-5V-3Cr

    Nicholas Wain, Xinjiang Hao, & Xinhua Wu, 1 Nov 2010, In: Materials Science and Engineering A. 527, 29-30, p. 7673-7683 11 p.

    Research output: Contribution to journalArticle

  116. 2011
  117. Published
  118. 2012
  119. Published

    The influence of cooling rate and alloy composition on the formation of borides during solidification of boron-containing TiAl alloys

    Dawei Hu, Xinhua Wu, & , 2012, Ti-2011: Proceedings of the 12th World Conference on Titanium. Zhou, L., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing: Science Press, p. 1416-1420 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  120. Published

    Effect of body motion on propagation path gain at 60 GHz

    Yuriy Nechayev, Xinhua Wu, Costas Constantinou & Peter Hall, 1 Jan 2012, p. 3397-3401. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  121. Published

    Preliminary estimate for observability of 60 GHz wireless body area networks

    Xinhua Wu, Yuriy Nechayev, Costas Constantinou, Peter Hall, , , & , 1 Jan 2012, p. 110-111. 2 p.

    Research output: Contribution to conference (unpublished)Paper

  122. 2013
  123. Published
  124. Published
  125. 2014
  126. Published

    High cycle fatigue and fracture behaviour of a hot isostatically pressed nickel-based superalloy

    Chunlei Qiu & Xinhua Wu, Jan 2014, In: Philosophical Magazine. 94, 3, p. 242-264

    Research output: Contribution to journalArticlepeer-review

  127. Published