Mike Adams

Publications

  1. Published
  2. Published

    An experimental study of the variability in the properties and quality of wet granules

    Mike Adams, & , 25 Feb 2004, In: Powder Technology. 140, 3, p. 209-216 8 p.

    Research output: Contribution to journalArticle

  3. Published

    Experimental study of single granule impact breakage

    Mike Adams, & , 1 Jul 2005, In: Chemical Engineering Science. 60, p. 4005-4018 14 p.

    Research output: Contribution to journalArticle

  4. Published

    Impact deformation and rebound of wet granules

    Mike Adams, , & , 25 Feb 2004, In: Powder Technology. 140, 3, p. 248-257 10 p.

    Research output: Contribution to journalArticle

  5. Published

    Roll Pressing

    Mike Adams, Jonathan Seville, , & , 1 Jan 2008, Handbook of Powder Technology. Vol. 11.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  6. Published

    Influence of utlrasonics on upsetting of a model paste

    Mike Adams, 1 May 2002, In: Ultrasonics. 40, p. 43-48 6 p.

    Research output: Contribution to journalArticle

  7. Published

    Discrete particle-continuum fluid modelling of gas-solid fluidised beds

    David Kafui, Colin Thornton & Mike Adams, 1 Jul 2002, In: Chemical Engineering Science. 57, p. 2395-2410 16 p.

    Research output: Contribution to journalArticle

  8. Published
  9. Published
  10. Published

    Discrete element simulations of a high-shear mixer

    David Parker, Mike Adams & Jonathan Seville, 1 Jun 2004, In: Advanced Powder Technology. 15, 3, p. 297-309 13 p.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    The influence of DEM simulation parameters on the particle behaviour in a V-mixer

    David Parker, , Mike Adams & Jonathan Seville, 1 Sep 2002, In: Chemical Engineering Science. 57(17), 17, p. 3621-3638 18 p.

    Research output: Contribution to journalArticle

  12. Published

    Non-Equilibrium Particle Motion in the Vicinity of a Single Blade

    David Parker, Adam Burbidge, Mike Adams & Jonathan Seville, 29 May 2003, In: Powder Technology. 132, 1, p. 1-9 9 p.

    Research output: Contribution to journalArticle

  13. Published

    Discrete element simulations of a high shear mixer

    David Parker, Mike Adams & Jonathan Seville, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  14. Published

    On the squeeze flow of a power-law fluid between rigid spheres

    Mike Adams, 1 Sep 2001, In: Journal of Non-Newtonian Fluid Mechanics. 100, p. 151-164 14 p.

    Research output: Contribution to journalArticle

  15. Published

    Roller compaction: Ribbon splitting and sticking

    Mike Adams, , & , 25 Mar 2019, In: International Journal of Pharmaceutics. 559, p. 156-172 17 p.

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Effect of impeller speed on mechanical and dissolution properties of high-shear granules

    Mike Adams, & , 1 Nov 2010, p. 305-315. 11 p.

    Research output: Contribution to conference (unpublished)Paper

  17. Published

    Effect of impeller speed on mechanical properties of granules in high shear granulation

    Mike Adams, & , 1 Jan 2009.

    Research output: Contribution to conference (unpublished)Paper

  18. Published

    The coefficient of restitution of different representative types of granules

    Mike Adams, & , 1 Jan 2007, In: Chemical Engineering Science. 62, p. 437-450 14 p.

    Research output: Contribution to journalArticle

  19. Published

    Impact behaviour of different types of granules

    Mike Adams, & , 1 Jan 2005, p. 11-12. 2 p.

    Research output: Contribution to conference (unpublished)Abstract

  20. Published

    Effect of impeller speed on mechanical properties of granules in high shear granulation

    Mike Adams, & , 1 Jan 2009, In: Chemical Engineering Science. 164, p. 305-315 11 p.

    Research output: Contribution to journalArticle

  21. Published

    Effect of batch size on mechanical properties of granules in high shear granulation

    Mike Adams, & , 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 44-52 9 p.

    Research output: Contribution to journalArticle

  22. Published
  23. Published

    Development of a Biomimetic MEMS based Capacitive Tactile Sensor

    Mike Adams, , David Hukins & Michael Ward, 1 Sep 2009, In: Procedia Chemistry. 1, 1, p. 124-127 4 p.

    Research output: Contribution to journalArticle

  24. Published
  25. Published

    A capacitive tactile sensor array for surface texture discrimination

    Carl Anthony, Mike Adams, & Michael Ward, 1 Aug 2011, In: Microelectronic Engineering. 88, 8, p. 1811-1813 3 p.

    Research output: Contribution to journalArticle

  26. Published

    Friction of the Human Finger Pad: Influence of Moisture, Occlusion and Velocity

    Mike Adams, 1 Nov 2011, In: Tribology Letters. 44, 2, p. 117-137 21 p.

    Research output: Contribution to journalArticle

  27. Published

    Predicting the pressure distribution during roll compaction from uniaxial compaction measurements

    Mike Adams, , & Chuan-yu Wu, 1 Nov 2010, p. 410-417. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  28. Published

    Comparative study of powder compression behaviour during roller compaction and uniaxial compaction

    Mike Adams, & Chuan-yu Wu, 1 Jan 2009.

    Research output: Contribution to conference (unpublished)Paper

  29. Published

    Contact electrification and charge distribution on elongated particles in a vibrating container

    Mike Adams, , & , 24 Mar 2015, In: Chemical Engineering Science. 125, p. 238-247 10 p.

    Research output: Contribution to journalArticlepeer-review

  30. E-pub ahead of print

    DEM-CFD analysis of contact electrification and electrostatic interactions during fluidization

    Chuan-yu Wu & Mike Adams, 12 Aug 2016, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  31. Published

    Numerical analysis of contact electrification of non-spherical particles in a rotating drum

    Chuan-yu Wu & Mike Adams, Nov 2015, In: Powder Technology. 285, p. 110-122 13 p.

    Research output: Contribution to journalArticlepeer-review

  32. Published

    A coarse grained model for viscoelastic solids in discrete multiphysics simulations

    Iwan Halim Sahputra, Alessio Alexiadis & Mike Adams, Jun 2020, In: ChemEngineering. 4, 2, p. 1-15 15 p., 30.

    Research output: Contribution to journalArticlepeer-review

  33. Published
  34. Published
  35. Published
  36. Published

    Descriptive classification of the impact failure modes of spherical particles

    Mike Adams, , & , 1 Jun 2004, In: Powder Technology. 143-144, 1, p. 19-30 12 p.

    Research output: Contribution to journalArticlepeer-review

  37. Published
  38. Published

    Numerical simulations of diametrical compression tests on agglomerates

    Colin Thornton, & Mike Adams, 25 Feb 2004, In: Powder Technology. 140, 3, p. 258-267 10 p.

    Research output: Contribution to journalArticle

  39. Published

    A two-dimensional study of the rupture of funicular liquid bridges

    Mike Adams, 1 Feb 2002, In: Chemical Engineering Science. 57, p. 677-692 16 p.

    Research output: Contribution to journalArticle

  40. Published

    Friction reduction through ultrasonic vibration part 1: modelling intermittent contact

    Mike Adams, Apr 2017, In: IEEE Transactions on Haptics. 10, 2, p. 196-207 12 p.

    Research output: Contribution to journalArticlepeer-review

  41. Published

    Screw extrusion of food powders: prediction and performance

    Mike Adams & , 1 Mar 2001, In: Chemical Engineering Science. 56, p. 1933-1949 17 p.

    Research output: Contribution to journalArticle

  42. Published

    Effects of wetting hysteresis on pendular liquid bridges between rigid spheres

    Mike Adams, & Jonathan Seville, 19 Feb 2003, In: Powder Technology. 130, 1, p. 63-69 7 p.

    Research output: Contribution to journalArticle

  43. Published

    Pendular Capillary Bridges

    Mike Adams, Jonathan Seville, & , 1 Jan 2007, Handbook of Powder Technology Volume llL Granulation. Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  44. Published

    A computational model of flavour deposition onto food surfaces

    David Wong, Mike Adams, Jonathan Seville & Peter Fryer, 1 Jun 2005, In: Food and Bioproducts Processing. 83, p. 99-106 8 p.

    Research output: Contribution to journalArticle

  45. Published

    The saltations of different sized particles in aeolian sand transport

    Chuan-yu Wu & Mike Adams, 1 Nov 2011, In: Geomorphology. 134, 3-4, p. 217-223 7 p.

    Research output: Contribution to journalArticle

  46. Published
  47. Published

    Mechanical characterization of agarose micro-particles with a narrow size distribution

    Zhibing Zhang, , , & Mike Adams, 1 May 2009, In: Powder Technology. 192, 1, p. 122-130 9 p.

    Research output: Contribution to journalArticle

  48. Published

    The influence of flow confinement on the rheological properties of complex fluids

    Zhibing Zhang, David Cheneler, & Mike Adams, Mar 2010, In: Rheologica Acta. 49, 3, p. 255-266 12 p.

    Research output: Contribution to journalArticlepeer-review

  49. Published
  50. Published