Kyle Jiang

Publications

  1. 2020
  2. E-pub ahead of print
  3. 2019
  4. Published
  5. Published

    Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances

    Kyle Jiang, 22 Jul 2019, In: Materials Science and Engineering A. 761, 138018.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    A liquid MEMS inclinometer sensor with improved sensitivity

    Kyle Jiang, 1 Jan 2019, In: Sensors and Actuators A: Physical. 285, p. 369-377 9 p.

    Research output: Contribution to journalArticlepeer-review

  7. 2018
  8. Published
  9. Published
  10. Published

    Microfabrication of Net Shape Zirconia/Alumina Nano-Composite Micro Parts

    Khamis Essa & Kyle Jiang, 5 Aug 2018, In: Nanomaterials. 8, 8, 593.

    Research output: Contribution to journalArticlepeer-review

  11. E-pub ahead of print

    Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachinery

    Kyle Jiang, 15 Mar 2018, (E-pub ahead of print) In: Propulsion and Power Research. 7, 1, p. 19-29 11 p.

    Research output: Contribution to journalArticlepeer-review

  12. Published

    Microfabrication of components based on functionally graded materials

    Kyle Jiang, 20 Jan 2018, Advances in Ceramic Matrix Composites: Second Edition. M. Low, I. (ed.). 2nd ed. Elsevier, p. 697-709 13 p. (Woodhead Publishing Series in Composites Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  13. 2017
  14. Published
  15. Published
  16. Published

    Carbon Nanotube Array Based Binary Gabor Zone Plate Lenses

    Tahseen Jwad, Ali Yetisen, Kyle Jiang & Haider Butt, 10 Nov 2017, In: Scientific Reports. 7, 1, 15256.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Spark plasma sintering of graphene platelet reinforced zirconia composites with improved mechanical performance

    Kyle Jiang, 14 Mar 2017, In: Materials Science and Engineering A. 688, p. 70-75 6 p.

    Research output: Contribution to journalArticlepeer-review

  18. Published

    Different photo-catalytic degradation of methylene blue by varied ZnO nanorods on dissimilar stainless steel wire sieves

    Kyle Jiang, Feb 2017, In: Materials Research Bulletin. 86, February 2017, p. 313-321

    Research output: Contribution to journalArticlepeer-review

  19. Published

    Graphene nanoribbon based plasmonic Fresnel zone plate lenses

    Haider Butt, Kyle Jiang & Ali Yetisen, 2017, In: RSC Advances. 7, 27, p. 16594-16601 8 p.

    Research output: Contribution to journalArticlepeer-review

  20. 2016
  21. Published

    Production of high-precision micro metallic components by electroforming process

    Kyle Jiang, 20 Oct 2016, In: Materials and Manufacturing Processes. 32, 12, p. 1325-1330 6 p.

    Research output: Contribution to journalLetterpeer-review

  22. E-pub ahead of print

    Optical scattering from graphene foam for oil imaging/sensing

    Haider Butt, Aydin Sabouri & Kyle Jiang, 28 Jul 2016, (E-pub ahead of print) In: RSC Advances. 6, 76, p. 71867-71874

    Research output: Contribution to journalArticlepeer-review

  23. Published

    A coiling robot for elevator compensation chain

    Kyle Jiang, 7 Mar 2016, In: Industrial Robot. 43, 4, p. 403-408 6 p.

    Research output: Contribution to journalArticlepeer-review

  24. Published

    Graphene-alumina nanocomposites with improved mechanical properties for biomedical applications

    Kyle Jiang, 20 Jan 2016, In: ACS Applied Materials & Interfaces. 8, 4, p. 2607–2616 9 p.

    Research output: Contribution to journalArticlepeer-review

  25. Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. 2015
  27. Published

    Laser directed writing of flat lenses on buckypaper

    Pavel Penchev, Yongjing Wang Wang, Kyle Jiang, Stefan Dimov & Haider Butt, 7 Aug 2015, In: Nanoscale. 7, 29, p. 12405-12410 6 p.

    Research output: Contribution to journalArticlepeer-review

  28. Published

    Net Shape Manufacture of Freestanding Ceramic Micro-components through Soft Lithography

    Hany Hassanin & Kyle Jiang, 18 May 2015, Micromanufacturing Engineering and Technology: Second Edition. p. 239-256 18 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  29. Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  30. Published

    Graphene-based ultrathin flat lenses

    Ali Yetisen, James Bowen, Kyle Jiang & Haider Butt, 18 Feb 2015, In: ACS Photonics. 2, 2, p. 200-207 8 p.

    Research output: Contribution to journalArticlepeer-review

  31. Published

    Method to improve catalyst layer model for modelling proton exchange membrane fuel cell

    Kyle Jiang, 2015, In: Journal of Power Sources. 289, p. 114-128 14 p.

    Research output: Contribution to journalArticlepeer-review

  32. 2014
  33. Published

    A proposed agglomerate model for oxygen reduction in the catalyst layer of proton exchange membrane fuel cells

    Kyle Jiang, 20 Dec 2014, In: Electrochimica Acta. 150, p. 320-328 9 p.

    Research output: Contribution to journalArticlepeer-review

  34. Published

    Flow properties of an intact MPL from nano-tomography and pore network modelling

    Kyle Jiang, 15 Nov 2014, In: Fuel. 136, p. 307-315 9 p.

    Research output: Contribution to journalArticlepeer-review

  35. Published

    Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells

    Kyle Jiang, 13 Oct 2014, In: International Journal of Hydrogen Energy. 39, 30, p. 17222-17230 9 p.

    Research output: Contribution to journalArticlepeer-review

  36. Published

    A highly efficient synthetic process of graphene films with tunable optical properties

    Kyle Jiang, 30 Sep 2014, In: Applied Surface Science. 314, p. 71-77 7 p.

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Spark plasma sintering of alumina composites with graphene platelets and silicon carbide nanoparticles

    Kyle Jiang, Sep 2014, In: Advanced Engineering Materials. 16, 9, p. 1111-1118 8 p.

    Research output: Contribution to journalArticlepeer-review

  38. Published

    Electrochemical codeposition of graphene platelets and nickel for improved corrosion resistant properties

    Kyle Jiang, 7 Aug 2014, In: RSC Advances. 4, 68, p. 36245-36252 7 p.

    Research output: Contribution to journalArticlepeer-review

  39. Published

    A comprehensive study on technologies of tyre monitoring systems and possible energy solutions

    Archie Kubba & Kyle Jiang, 11 Jun 2014, In: Sensors. 14, 6, p. 10306-10345 40 p.

    Research output: Contribution to journalArticlepeer-review

  40. Published

    Surface plasmon enhanced photoluminescence of ZnO nanorods by capping reduced graphene oxide sheets

    Kyle Jiang, 5 May 2014, In: Optics Express. 22, 10, p. 11436-11445 10 p.

    Research output: Contribution to journalArticlepeer-review

  41. Published

    Reliability of the spherical agglomerate models for catalyst layer in polymer electrolyte membrane fuel cells

    Kyle Jiang, 24 Apr 2014, In: Electrochimica Acta. 133, p. 475-483 9 p.

    Research output: Contribution to journalArticlepeer-review

  42. Published

    Fabricating functionally graded ceramic micro-components using soft lithography

    Hany Hassanin & Kyle Jiang, Feb 2014, Advances in Ceramic Matrix Composites. Elsevier (Singapore) Pte Ltd, p. 611-623 13 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  43. Published

    Development of patch clamping

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 3-16 14 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  44. Published

    Effect of roughness on gigaseal formation

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 29-47 19 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  45. Published
  46. Published

    Net shape manufacturing of ceramic micro parts with tailored graded layers

    Hany Hassanin & Kyle Jiang, 1 Jan 2014, In: Journal of Micromechanics and Microengineering. 24, 1, 8 p., 015018.

    Research output: Contribution to journalArticlepeer-review

  47. Published

    Study of glass micropipettes from tip formation to characterization

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 75-94 20 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  48. Published

    Computational modelling of a graphene Fresnel lens on different substrates

    Ali Yetisen, Kyle Jiang & Haider Butt, 2014, In: RSC Advances. 4, 57, p. 30050-30058 9 p.

    Research output: Contribution to journalArticlepeer-review

  49. Published
  50. Published
  51. 2013
  52. Published

    Efficiency enhancement of a cantilever-based vibration energy harvester

    Archie Kubba & Kyle Jiang, 23 Dec 2013, In: Sensors. 14, 1, p. 188-211

    Research output: Contribution to journalArticlepeer-review

  53. Published

    Effects of particle size on soft lithography process, the green and sintered micro alumina parts

    Hany Hassanin & Kyle Jiang, 1 Nov 2013, In: International Journal of Applied Ceramic Technology. 10, 6, p. 1014-1022 9 p.

    Research output: Contribution to journalArticlepeer-review

  54. Published

    Fabrication and characterization of stabilised zirconia micro parts via slip casting and soft moulding

    Hany Hassanin & Kyle Jiang, 1 Sep 2013, In: Scripta Materialia. 69, 6, p. 433-436 4 p.

    Research output: Contribution to journalArticlepeer-review

  55. Published

    Mechanical properties of graphene platelet-reinforced alumina ceramic composites

    Kyle Jiang, 1 Aug 2013, In: Ceramics International. 39, 6, p. 6215-6221 7 p.

    Research output: Contribution to journalArticlepeer-review

  56. Published
  57. Published
  58. Published

    Investigation of techniques for the measurement of articular cartilage surface roughness

    James Bowen, Kyle Jiang, Daniel Espino & Duncan Shepherd, Jan 2013, In: Micron. 44, p. 179-184 6 p.

    Research output: Contribution to journalArticlepeer-review

  59. 2012
  60. Published
  61. Published

    Toughening of zirconia/alumina composites by the addition of graphene platelets

    Jun Liu, Kyle Jiang, 1 Dec 2012, In: Journal of the European Ceramic Society. 32, 16, p. 4185-4193 9 p.

    Research output: Contribution to journalArticlepeer-review

  62. Published

    Morphological characterization of sub-micron PDMS bowl structures

    Ali Mohammadkhani & Kyle Jiang, 22 Nov 2012, 2012 12th IEEE International Conference on Nanotechnology, NANO 2012. 6321998

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    Nanopatterning of metallic features over uniformed arrays of microbowl structures

    Ali Mohammadkhani, Hany Hassanin, Carl Anthony & Kyle Jiang, 1 Oct 2012, In: Microelectronic Engineering. 98, p. 266-269 4 p.

    Research output: Contribution to journalArticlepeer-review

  64. Published

    Modeling fluid flow in the gas diffusion layers in PEMFC using the multiple relaxation-time lattice Boltzmann method

    Kyle Jiang, 1 Jun 2012, In: Fuel Cells. 12, 3, p. 365-381 17 p.

    Research output: Contribution to journalArticlepeer-review

  65. Published
  66. Published

    Simulation of Liquid Water Breakthrough in a Nanotomography Reconstruction of a Carbon Paper Gas-Diffusion Layer

    Kyle Jiang, 1 Feb 2012, In: AIChE Journal. 58, 2, p. 646-655 10 p.

    Research output: Contribution to journalArticle

  67. Published

    Ceramic nanocomposite by electrodeposition of nickel into porous alumina matrix

    Hany Hassanin, Ali Mohammadkhani & Kyle Jiang, 1 Jan 2012, Proceedings of the IEEE Conference on Nanotechnology.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  68. Published

    Fabrication of hybrid nanostructured arrays using a PDMS/PDMS replication process

    Hany Hassanin, Ali Mohammadkhani & Kyle Jiang, 1 Jan 2012, In: Lab on a Chip. 12, 20, p. 4160-4167 8 p.

    Research output: Contribution to journalArticlepeer-review

  69. 2011
  70. Published

    3D visualization and characterization of nano structured materials

    Kyle Jiang, 1 Dec 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 770-775 6 p. 6144402

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. Published

    Estimation of AFM Tip Shape and Status in Linewidth and Profile Measurement

    Phil Prewett & Kyle Jiang, 1 Dec 2011, p. 11041-11044. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  72. Published

    Preliminary investigation of surface characteristics of articular cartilage with 3-D tomography

    Duncan Shepherd & Kyle Jiang, 1 Dec 2011, 2011 International Conference on Nanoscience, Technology and Societal Implications, NSTSI11. 6111998

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Published

    Multiple replication of thick PDMS micropatterns using surfactants as release agents

    Hany Hassanin & Kyle Jiang, 1 Nov 2011, In: Microelectronic Engineering. 88, 11, p. 3275-3277 3 p.

    Research output: Contribution to journalArticle

  74. Published

    Characterization of surface properties of glass micropipettes using SEM stereoscopic technique

    Majid Malboubi & Kyle Jiang, 1 Aug 2011, In: Microelectronic Engineering. 88, 8, p. 2666-2670 5 p.

    Research output: Contribution to journalArticle

  75. Published
  76. Published

    Surface properties of glass micropipettes and their effect on biological studies

    Majid Malboubi & Kyle Jiang, 1 May 2011, In: Nanoscale Research Letters. 6, p. 401 1 p.

    Research output: Contribution to journalArticle

  77. Published
  78. Published

    Macroscopic invisibility cloaking of visible light

    Xianzhong Chen, Kyle Jiang & Shuang Zhang, 4 Jan 2011, In: Nature Communications. 2, 1, 176.

    Research output: Contribution to journalArticlepeer-review

  79. 2010
  80. Published

    Multi-scale simulation of single-phase multi-component transport in the cathode gas diffusion layer of a polymer electrolyte fuel celltalized

    Kyle Jiang, 1 Dec 2010, Fuel Cell Membranes, Electrode Binders, and MEA Performance. 27 ed. Vol. 28. p. 103-111 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. Published

    A comparison of surface roughness analysis methods applied to urinary catheters

    Kyle Jiang & David Hukins, 1 Oct 2010, In: Precision Engineering. 34, 4, p. 798-801 4 p.

    Research output: Contribution to journalArticle

  82. Published

    Three-dimensional surface reconstruction of diatomaceous frustules

    Xianzhong Chen & Kyle Jiang, 1 Aug 2010, In: Analytical Biochemistry. 403, 1-2, p. 63-66 4 p.

    Research output: Contribution to journalArticle

  83. Published
  84. Published
  85. Published

    Experimental and simulation study of the effect of pipette roughness on giga-seal formation in patch clamping

    Kyle Jiang, 1 May 2010, p. 778-781. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  86. Published

    Fabrication of 316-L stainless steel micro components using encapsulating soft mould and isopressing technique

    Kyle Jiang & Isaac Chang, 1 May 2010, p. 1623-1628. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  87. Published

    Functionally graded microceramic components

    Kyle Jiang, 1 May 2010, p. 1610-1613. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  88. Published
  89. Published

    Nanotomography based study of gas diffusion layers

    Kyle Jiang, 1 May 2010, p. 1640-1642. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  90. Published

    Optimized process for the fabrication of zirconia micro parts

    Kyle Jiang, 1 May 2010, p. 1617-1619. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  91. Published

    Sensitivity enhancement of SPR biosensor by improving surface quality of glass slides

    Xianzhong Chen & Kyle Jiang, 1 May 2010, p. 790-792. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  92. Published

    Stainless steel-titania composite micro gear fabricated by soft moulding and dispersing technique

    Kyle Jiang, 1 May 2010, p. 1650-1654. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  93. Published

    3D reconstruction of a gas diffusion layer and a microporous layer

    Kyle Jiang, 1 Apr 2010, In: Journal of Membrane Science. 351, 1-2, p. 69-74 6 p.

    Research output: Contribution to journalArticle

  94. Published

    Threshold Fine-Tuning and 3D Characterisation of Porous Media Using X-ray Nanotomography

    Kyle Jiang, 1 Apr 2010, In: Current Nanoscience. 6, 2, p. 226-231 6 p.

    Research output: Contribution to journalArticle

  95. Published
  96. Published
  97. Published

    Effect of aging on optical properties of bimetallic sensor chips

    Xianzhong Chen & Kyle Jiang, 1 Jan 2010, In: Optics Express. 18, 2, p. 1105-1112 8 p.

    Research output: Contribution to journalArticle

  98. Published
  99. Published

    Infiltration-Processed, Functionally Graded Materials for Microceramic Componenets

    Hany Hassanin & Kyle Jiang, 1 Jan 2010, p. 368-371. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  100. Published

    Micro fabrication of stainless steel micro components using soft moulding and aqueous slurry

    Kyle Jiang, 1 Jan 2010, In: Microelectronic Engineering. 87, 1, p. 72-78 7 p.

    Research output: Contribution to journalArticle

  101. Published

    Micro machine parts fabricated from Aqueous based stainless steel slurry

    Kyle Jiang, 1 Jan 2010, Electronic Engineering and Computing Technology. Vol. 60.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  102. Published
  103. Published

    Study of the Tip Surface Morphology of glass micropipettes and its effect on Giga-Seal formation

    Kyle Jiang, 1 Jan 2010, Electronic Engineering and computing Technology. Vol. 60.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  104. Published
  105. Published

    Surface property characterization of ordered nanostructure using SEM stereoscopic technique

    Carl Anthony & Kyle Jiang, 1 Jan 2010.

    Research output: Contribution to conference (unpublished)Paper

  106. Published

    Study of the tip surface morphology of glass micropipettes and its effects on gigaseal formation

    Majid Malboubi, Kyle Jiang & Yuchun Gu, 2010, Electronic Engineering and Computing Technology.

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  107. 2009
  108. Published

    Fabrication of alumina composite microengine parts using softlithography

    Hany Hassanin & Kyle Jiang, 1 Dec 2009, SAE Technical Papers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  109. Published
  110. Published
  111. Published

    Fabrication of free standing 316-L stainless steel-Al2O3 composite micro machine parts by soft moulding

    Kyle Jiang, 1 Sep 2009, In: Acta Materialia. 57, 16, p. 4751-4757 7 p.

    Research output: Contribution to journalArticle

  112. Published

    Characterisation of stainless steel microparts fabricated by soft moulding technique

    Kyle Jiang, 1 Jun 2009, In: Micro & Nano Letters. 4, 2, p. 99-105 7 p.

    Research output: Contribution to journalArticle

  113. Published

    Precision Micrfabrication of Milli-metre Wave Components

    Mao Ke, Yi Wang, Jianlin Wei, Kyle Jiang & Mike Lancaster, 1 Jun 2009.

    Research output: Contribution to conference (unpublished)Paper

  114. Published

    3D reconstruction of a micro pipette tip

    Phil Prewett & Kyle Jiang, 1 Apr 2009, p. 868-870. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  115. Published

    Alumina composite suspension preparation for softlithography microfabrication

    Kyle Jiang, 1 Apr 2009, p. 929-932. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  116. Published

    Alumina composite suspension preparation for softlithography microfabrication

    Hany Hassanin & Kyle Jiang, 1 Apr 2009, In: Microelectronic Engineering. 86, 4-6, p. 929-932 4 p.

    Research output: Contribution to journalArticlepeer-review

  117. Published

    Fabrication of large-area nickel nanobump arrays

    Xianzhong Chen, Xueyong Wei & Kyle Jiang, 1 Apr 2009, p. 871-873. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  118. Published

    Net shape fabrication of stainless steel–alumina composite micro parts

    Kyle Jiang, 1 Apr 2009, In: Journal of Micromechanics and Microengineering. 19, 4, p. 045018

    Research output: Contribution to journalArticlepeer-review

  119. Published
  120. Published
  121. Published
  122. Published
  123. Published
  124. Published

    Fabrication of large-area PDMS nanobowl structures

    Xianzhong Chen, Xueyong Wei & Kyle Jiang, 17 Mar 2009, In: Microelectronic Technology.

    Research output: Contribution to journalArticle

  125. Published

    Research and evaluation of a high temperature pressure sensor chip

    Phil Prewett & Kyle Jiang, 17 Mar 2009, p. 661-665. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  126. Published
  127. Published
  128. Published

    Cold-isopress-based process for fabrication of stainless steel micromachine components

    Kyle Jiang, 1 Jan 2009, In: Micro & Nano Letters. 4, 3, p. 160-165 6 p.

    Research output: Contribution to journalArticle

  129. Published

    Fabrication of AI O /SiC composite microcomponents using non-aqueous suspension

    Hany Hassanin & Kyle Jiang, 1 Jan 2009, In: Advanced Engineering Materials. 11, 1-2, p. 101-105 5 p.

    Research output: Contribution to journalArticlepeer-review

  130. Published

    Fabrication of alumina composite microengine parts using softlithography

    Hany Hassanin & Kyle Jiang, 1 Jan 2009, In: SAE Technical Papers.

    Research output: Contribution to journalArticlepeer-review

  131. Published
  132. Published

    Net-Shape Alumina Microcomponents by Conversion of Al Powder

    Kyle Jiang & Isaac Chang, 1 Jan 2009, In: Advanced Engineering Materials. 11, 1, p. 106-110 5 p.

    Research output: Contribution to journalArticle

  133. Published

    Synthesis and characterization of nanoparticulate strengthened nickel microcomponents

    Xueyong Wei & Kyle Jiang, 1 Jan 2009, p. 299-304. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  134. Published

    The Effect of Pipette Tip Roughness on Giga-seal Formation

    Kyle Jiang, 1 Jan 2009, p. 1849-1852. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  135. 2008
  136. Published

    Micro/nano x-ray tomography reconstruction fine-tuning usig SEM images

    Hossein Ostadi Valiabad, Kyle Jiang & Phil Prewett, 17 Dec 2008, In: Micro & Nano Letters. 3, 4, p. 106-109 4 p.

    Research output: Contribution to journalArticle

  137. Published

    Micromachined Rectangular Coaxial Line and Cavity Resonator for 77 GHz Applications using SU8 Photoresist

    Mao Ke, Yi Wang, Kyle Jiang & Mike Lancaster, 1 Dec 2008, Proceedings of the Microwave Conference, 2008. APMC 2008. Asia-Pacific. Institute of Electrical and Electronics Engineers (IEEE), p. 486-9 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  138. Published

    Micromachined rectangular coaxial line and cavity resonator for 77GH z applications using SU8 Photoresist

    Yi Wang, Kyle Jiang & Mike Lancaster, 1 Dec 2008, Proceedings of 2008 Asia Pacific Microwave Conference, APMC 2008. 4957973

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  139. Published

    The influence of Yb and Nd substituents on high-power piezoelectric properties of PMS–PZT ceramics

    Kyle Jiang, 1 Dec 2008, In: Ceramics International. 34, 8, p. 2067-2072 6 p.

    Research output: Contribution to journalArticle

  140. Published
  141. Published

    Large-scale fabrication of ordered metallic hybrid nanostructures

    Xianzhong Chen, Xueyong Wei & Kyle Jiang, 24 Jul 2008, In: Optics Express. 16, 16, p. 11888-11893 6 p.

    Research output: Contribution to journalArticle

  142. Published

    Determination of young's modulus of electrochemically co-deposited Ni-Al2O3 nanocomposite

    Hanshan Dong & Kyle Jiang, 30 Apr 2008, In: Materials Letters. 62, 12-13, p. 1916-1918 3 p.

    Research output: Contribution to journalArticle

  143. Published
  144. Published

    Micro-nano x-ray tomography reconstruction tuning using SEM images for PEMFC gas diffusion layers

    Hossein Ostadi Valiabad, Kyle Jiang & Phil Prewett, 17 Mar 2008, p. 428-431. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  145. Published

    Synthesis of sealed sponge ZnO nanospheres through a novel NH 3 -evaporation method

    Kyle Jiang, 20 Feb 2008, In: Nanotechnology. 19, 7, p. 075605-

    Research output: Contribution to journalArticle

  146. Published

    A large-area hybrid metallic nanostructure array and its optical properties

    Xianzhong Chen & Kyle Jiang, 1 Jan 2008, In: Nanotechnology. 19, 21

    Research output: Contribution to journalArticle

  147. Published

    Fabrication of stainless steel micro components using soft lithography

    Kyle Jiang & Isaac Chang, 1 Jan 2008.

    Research output: Contribution to conference (unpublished)Paper

  148. Published
  149. Published
  150. Published

    Optimization of a novel micro-opto-X-ray imaging lens

    Phil Prewett, Kyle Jiang, 1 Jan 2008, In: Microelectronic Engineering. 85, 5-6, p. 1086-1088 3 p.

    Research output: Contribution to journalArticle

  151. Published

    Study of Focused Ion Beam Microfabrication in Foturan (TM) Photosensitive Glass

    Carl Anthony, Phil Prewett, Kyle Jiang, Michael Ward, 1 Jan 2008, p. 91-100. 10 p.

    Research output: Contribution to conference (unpublished)Paper

  152. Published
  153. 2007
  154. Published
  155. Published
  156. Published
  157. Published

    Making alumina microcomponents from A1 powder

    Kyle Jiang, Lucian Falticeanu, Graham Davies & Isaac Chang, 13 Mar 2007, In: Materials Science Forum. 534-536, p. 1041-1044 4 p.

    Research output: Contribution to journalArticle

  158. Published
  159. Published

    Electrochemical Co-deposition of Nickel-Alumina Nanocomposite for Microsystem Applications

    Xueyong Wei, Phil Prewett & Kyle Jiang, 1 Jan 2007, p. 34-38. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  160. Published

    Fabrication of Ni-Al2O3 composite microcomponent by electroforming

    Xueyong Wei, Phil Prewett & Kyle Jiang, 1 Jan 2007, In: Microelectronic Engineering. 84, 5-8, p. 1256-1259 4 p.

    Research output: Contribution to journalArticle

  161. Published
  162. Published

    Microfabrication in Foturan (TM) photosensitive glass using focused ion beam

    Carl Anthony, Phil Prewett & Kyle Jiang, 1 Jan 2007, p. 1335-1339. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  163. Published

    The Unique Dielectric Behaviour of Nanosilica Epoxy Composites

    Kyle Jiang, 1 Jan 2007, p. 1109-1114. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  164. 2006
  165. Published

    Diectric relaxation behaviour in Pb(Mn1/3Sb2/3)O3 - Pb(Zr,Ti)O3

    Kyle Jiang, Graham Davies, 1 Oct 2006, In: Smart Materials and Structures. 15, p. 1249-1254 6 p.

    Research output: Contribution to journalArticle

  166. Published

    Pressure free fabrication of 3D microcomponents using Al powders

    Isaac Chang & Kyle Jiang, 1 Feb 2006, In: Advanced Engineering Materials. 8, 1-2, p. 38-41 4 p.

    Research output: Contribution to journalArticle

  167. Published
  168. Published
  169. 2005
  170. Published

    Design and fabrication of a micro reciprocating engine

    Kyle Jiang, 31 Dec 2005, In: Combustion Engines. 3(122), p. 32-41 10 p.

    Research output: Contribution to journalArticle

  171. Published

    A DRIE based EDM process for metallic microcomponent fabrication

    Kyle Jiang & Graham Davies, 25 Nov 2005, p. 402-411. 10 p.

    Research output: Contribution to conference (unpublished)Paper

  172. Published

    Design and Fabrication of a micro reciprocating engine

    Kyle Jiang & Graham Davies, 25 Nov 2005.

    Research output: Contribution to conference (unpublished)Paper

  173. Published
  174. Published

    Optimized SU-8 UV-lithographical process for a Ka-band filter fabrication

    Kyle Jiang & Mike Lancaster, 25 Nov 2005, p. 352-356. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  175. Published

    Surface roughness comparison between SU-8 and silicon microcomponents

    Kyle Jiang & Graham Davies, 25 Nov 2005, p. 221-228. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  176. Published

    SU-8 Ka-band filter and microfabrication

    Kyle Jiang, Mike Lancaster, 1 Aug 2005, In: Journal of Micromechanics and Microengineering. 15, p. 1522-1526 5 p.

    Research output: Contribution to journalArticlepeer-review

  177. Published

    Micro-moulding of Al alloy powder mxiture containing ultrafine Al and nano-sized Cu particles

    Kyle Jiang, Isaac Chang & Lucian Falticeanu, 1 Jan 2005, p. 391-396. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  178. Published

    Sintering of loosely packed powder mixture of ultrafine aluminium and nanopowder of Cu

    Kyle Jiang, Isaac Chang & Lucian Falticeanu, 1 Jan 2005, p. 211 - 216. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  179. Published

    Surface roughness characterization of silicon and SU-8 microcomponents

    Kyle Jiang & Graham Davies, 1 Jan 2005, Laser Metrology and Machine Performance VII - 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. euspen, p. 402-411 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  180. 2004
  181. Published

    Ka-band filter fabricated based on optimized ultrathick SU-8 UV lithographycal process

    Kyle Jiang, 31 Dec 2004, p. 30409-30412. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  182. Published

    Micro combustion engines and their fabrications

    Kyle Jiang, 25 Nov 2004, p. 30240-30245. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  183. Published

    Design and fabrication of a micro Wankel engine using MEMS technology

    Kyle Jiang & Phil Prewett, 1 Jun 2004, In: Microelectronic Engineering. 73-74, p. 529-534 6 p.

    Research output: Contribution to journalArticle

  184. Published

    Some factors that affect scaling at the micro-nano interface

    Graham Davies, Michael Ward, Kyle Jiang & Phil Prewett, 17 Mar 2004, p. 8022. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  185. Published

    Ultra-thick SU-8 fabrication for micro reciprocating engines

    Kyle Jiang, 1 Jan 2004, In: Journal of Microlithography, Microfabrication and Microsystems. 3, 4, p. 569-573 5 p.

    Research output: Contribution to journalArticle

  186. 2003
  187. Published

    An ultrathick SU-8 process using UV-lithography

    Kyle Jiang & Peng Jin, 31 Dec 2003, p. 45-49. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  188. Published

    Design and fabrication of a micro internal combustion Wankel engine

    Kyle Jiang & Phil Prewett, 31 Dec 2003.

    Research output: Contribution to conference (unpublished)Paper

  189. Published

    SU8 Microfabrication for a Ka-band filter

    Kyle Jiang, Peng Jin & Mike Lancaster, 2 Jul 2003, p. 1-4. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  190. Published

    Microfabrication of ultra-thick SU-8 photoresist for microengines

    Peng Jin & Kyle Jiang, 1 Jan 2003.

    Research output: Contribution to conference (unpublished)Paper

  191. 2002
  192. Published

    A MEMS Wankel rotary engine for time multiplexed plasma fabrication

    Kyle Jiang & Phil Prewett, 17 Mar 2002.

    Research output: Contribution to conference (unpublished)Paper

  193. Published
  194. Published

    Design and evaluation of a micro Wankel rotary engine for deep etching process

    Kyle Jiang & Phil Prewett, 1 Jan 2002, p. 10-14. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  195. Published

    Design and fabrication of a micro reciprocating engine using ultra-thick SU-8 photoresist, Euspen

    Kyle Jiang, Peng Jin & Phil Prewett, 1 Jan 2002.

    Research output: Contribution to conference (unpublished)Paper

  196. 2001
  197. Published

    Design and analysis of a micro receiprocating engine for the time multiplexed deep etching process

    Kyle Jiang & Phil Prewett, 1 Sep 2001.

    Research output: Contribution to conference (unpublished)Paper

  198. Published

    Design of a Micro Wankel Rotary Engine for MEMS Fabrication

    Kyle Jiang, Phil Prewett, Michael Ward, 1 Sep 2001.

    Research output: Contribution to conference (unpublished)Paper

  199. Published

    A sensor guided parallel parking system for nonholonomic vehicles

    Kyle Jiang, 1 Jan 2001.

    Research output: Contribution to conference (unpublished)Paper