Kyle Jiang

Publications

  1. 2020
  2. E-pub ahead of print
  3. 2019
  4. Published
  5. Published

    Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances

    Kyle Jiang, 22 Jul 2019, In: Materials Science and Engineering A. 761, 138018.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    A liquid MEMS inclinometer sensor with improved sensitivity

    Kyle Jiang, 1 Jan 2019, In: Sensors and Actuators A: Physical. 285, p. 369-377 9 p.

    Research output: Contribution to journalArticlepeer-review

  7. 2018
  8. Published
  9. Published
  10. Published

    Microfabrication of Net Shape Zirconia/Alumina Nano-Composite Micro Parts

    Khamis Essa & Kyle Jiang, 5 Aug 2018, In: Nanomaterials. 8, 8, 593.

    Research output: Contribution to journalArticlepeer-review

  11. E-pub ahead of print

    Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachinery

    Kyle Jiang, 15 Mar 2018, (E-pub ahead of print) In: Propulsion and Power Research. 7, 1, p. 19-29 11 p.

    Research output: Contribution to journalArticlepeer-review

  12. Published

    Microfabrication of components based on functionally graded materials

    Kyle Jiang, 20 Jan 2018, Advances in Ceramic Matrix Composites: Second Edition. M. Low, I. (ed.). 2nd ed. Elsevier, p. 697-709 13 p. (Woodhead Publishing Series in Composites Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  13. 2017
  14. Published
  15. Published
  16. Published

    Carbon Nanotube Array Based Binary Gabor Zone Plate Lenses

    Tahseen Jwad, Ali Yetisen, Kyle Jiang & Haider Butt, 10 Nov 2017, In: Scientific Reports. 7, 1, 15256.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Spark plasma sintering of graphene platelet reinforced zirconia composites with improved mechanical performance

    Kyle Jiang, 14 Mar 2017, In: Materials Science and Engineering A. 688, p. 70-75 6 p.

    Research output: Contribution to journalArticlepeer-review

  18. Published

    Different photo-catalytic degradation of methylene blue by varied ZnO nanorods on dissimilar stainless steel wire sieves

    Kyle Jiang, Feb 2017, In: Materials Research Bulletin. 86, February 2017, p. 313-321

    Research output: Contribution to journalArticlepeer-review

  19. Published

    Graphene nanoribbon based plasmonic Fresnel zone plate lenses

    Haider Butt, Kyle Jiang & Ali Yetisen, 2017, In: RSC Advances. 7, 27, p. 16594-16601 8 p.

    Research output: Contribution to journalArticlepeer-review

  20. 2016
  21. Published

    Production of high-precision micro metallic components by electroforming process

    Kyle Jiang, 20 Oct 2016, In: Materials and Manufacturing Processes. 32, 12, p. 1325-1330 6 p.

    Research output: Contribution to journalLetterpeer-review

  22. E-pub ahead of print

    Optical scattering from graphene foam for oil imaging/sensing

    Haider Butt, Aydin Sabouri & Kyle Jiang, 28 Jul 2016, (E-pub ahead of print) In: RSC Advances. 6, 76, p. 71867-71874

    Research output: Contribution to journalArticlepeer-review

  23. Published

    A coiling robot for elevator compensation chain

    Kyle Jiang, 7 Mar 2016, In: Industrial Robot. 43, 4, p. 403-408 6 p.

    Research output: Contribution to journalArticlepeer-review

  24. Published

    Graphene-alumina nanocomposites with improved mechanical properties for biomedical applications

    Kyle Jiang, 20 Jan 2016, In: ACS Applied Materials & Interfaces. 8, 4, p. 2607–2616 9 p.

    Research output: Contribution to journalArticlepeer-review

  25. Published

    Ultra-thin flat lenses made of graphene

    Kyle Jiang & Haider Butt, 20 Jan 2016, IEEE-NANO 2015 - 15th International Conference on Nanotechnology. Institute of Electrical and Electronics Engineers (IEEE), p. 132-135 4 p. 7388886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. 2015
  27. Published

    Laser directed writing of flat lenses on buckypaper

    Pavel Penchev, Yongjing Wang Wang, Kyle Jiang, Stefan Dimov & Haider Butt, 7 Aug 2015, In: Nanoscale. 7, 29, p. 12405-12410 6 p.

    Research output: Contribution to journalArticlepeer-review

  28. Published

    Net Shape Manufacture of Freestanding Ceramic Micro-components through Soft Lithography

    Hany Hassanin & Kyle Jiang, 18 May 2015, Micromanufacturing Engineering and Technology: Second Edition. p. 239-256 18 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  29. Published

    A finite-element hardness model for analyzing 316L stainless steel/ceramic nanocomposites

    Kyle Jiang, 19 Mar 2015, In: Mechanics of Composite Materials. 51, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticlepeer-review

  30. Published

    Graphene-based ultrathin flat lenses

    Ali Yetisen, James Bowen, Kyle Jiang & Haider Butt, 18 Feb 2015, In: ACS Photonics. 2, 2, p. 200-207 8 p.

    Research output: Contribution to journalArticlepeer-review

  31. Published

    Method to improve catalyst layer model for modelling proton exchange membrane fuel cell

    Kyle Jiang, 2015, In: Journal of Power Sources. 289, p. 114-128 14 p.

    Research output: Contribution to journalArticlepeer-review

  32. 2014
  33. Published

    A proposed agglomerate model for oxygen reduction in the catalyst layer of proton exchange membrane fuel cells

    Kyle Jiang, 20 Dec 2014, In: Electrochimica Acta. 150, p. 320-328 9 p.

    Research output: Contribution to journalArticlepeer-review

  34. Published

    Flow properties of an intact MPL from nano-tomography and pore network modelling

    Kyle Jiang, 15 Nov 2014, In: Fuel. 136, p. 307-315 9 p.

    Research output: Contribution to journalArticlepeer-review

  35. Published

    Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells

    Kyle Jiang, 13 Oct 2014, In: International Journal of Hydrogen Energy. 39, 30, p. 17222-17230 9 p.

    Research output: Contribution to journalArticlepeer-review

  36. Published

    A highly efficient synthetic process of graphene films with tunable optical properties

    Kyle Jiang, 30 Sep 2014, In: Applied Surface Science. 314, p. 71-77 7 p.

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Spark plasma sintering of alumina composites with graphene platelets and silicon carbide nanoparticles

    Kyle Jiang, Sep 2014, In: Advanced Engineering Materials. 16, 9, p. 1111-1118 8 p.

    Research output: Contribution to journalArticlepeer-review

  38. Published

    Electrochemical codeposition of graphene platelets and nickel for improved corrosion resistant properties

    Kyle Jiang, 7 Aug 2014, In: RSC Advances. 4, 68, p. 36245-36252 7 p.

    Research output: Contribution to journalArticlepeer-review

  39. Published

    A comprehensive study on technologies of tyre monitoring systems and possible energy solutions

    Archie Kubba & Kyle Jiang, 11 Jun 2014, In: Sensors. 14, 6, p. 10306-10345 40 p.

    Research output: Contribution to journalArticlepeer-review

  40. Published

    Surface plasmon enhanced photoluminescence of ZnO nanorods by capping reduced graphene oxide sheets

    Kyle Jiang, 5 May 2014, In: Optics Express. 22, 10, p. 11436-11445 10 p.

    Research output: Contribution to journalArticlepeer-review

  41. Published

    Reliability of the spherical agglomerate models for catalyst layer in polymer electrolyte membrane fuel cells

    Kyle Jiang, 24 Apr 2014, In: Electrochimica Acta. 133, p. 475-483 9 p.

    Research output: Contribution to journalArticlepeer-review

  42. Published

    Fabricating functionally graded ceramic micro-components using soft lithography

    Hany Hassanin & Kyle Jiang, Feb 2014, Advances in Ceramic Matrix Composites. Elsevier (Singapore) Pte Ltd, p. 611-623 13 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  43. Published

    Development of patch clamping

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 3-16 14 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  44. Published

    Effect of roughness on gigaseal formation

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 29-47 19 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  45. Published
  46. Published

    Net shape manufacturing of ceramic micro parts with tailored graded layers

    Hany Hassanin & Kyle Jiang, 1 Jan 2014, In: Journal of Micromechanics and Microengineering. 24, 1, 8 p., 015018.

    Research output: Contribution to journalArticlepeer-review

  47. Published

    Study of glass micropipettes from tip formation to characterization

    Kyle Jiang, 1 Jan 2014, SpringerBriefs in Applied Sciences and Technology. 9783642391279 ed. Springer Verlag, p. 75-94 20 p. (SpringerBriefs in Applied Sciences and Technology; no. 9783642391279).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  48. Published

    Computational modelling of a graphene Fresnel lens on different substrates

    Ali Yetisen, Kyle Jiang & Haider Butt, 2014, In: RSC Advances. 4, 57, p. 30050-30058 9 p.

    Research output: Contribution to journalArticlepeer-review

  49. Published
  50. Published
  51. 2013
  52. Published

    Efficiency enhancement of a cantilever-based vibration energy harvester

    Archie Kubba & Kyle Jiang, 23 Dec 2013, In: Sensors. 14, 1, p. 188-211

    Research output: Contribution to journalArticlepeer-review

  53. Published

    Effects of particle size on soft lithography process, the green and sintered micro alumina parts

    Hany Hassanin & Kyle Jiang, 1 Nov 2013, In: International Journal of Applied Ceramic Technology. 10, 6, p. 1014-1022 9 p.

    Research output: Contribution to journalArticlepeer-review

  54. Published

    Fabrication and characterization of stabilised zirconia micro parts via slip casting and soft moulding

    Hany Hassanin & Kyle Jiang, 1 Sep 2013, In: Scripta Materialia. 69, 6, p. 433-436 4 p.

    Research output: Contribution to journalArticlepeer-review

  55. Published

    Mechanical properties of graphene platelet-reinforced alumina ceramic composites

    Kyle Jiang, 1 Aug 2013, In: Ceramics International. 39, 6, p. 6215-6221 7 p.

    Research output: Contribution to journalArticlepeer-review

  56. Published
  57. Published
  58. Published

    Investigation of techniques for the measurement of articular cartilage surface roughness

    James Bowen, Kyle Jiang, Daniel Espino & Duncan Shepherd, Jan 2013, In: Micron. 44, p. 179-184 6 p.

    Research output: Contribution to journalArticlepeer-review

  59. 2012
  60. Published
  61. Published

    Toughening of zirconia/alumina composites by the addition of graphene platelets

    Jun Liu, Kyle Jiang, 1 Dec 2012, In: Journal of the European Ceramic Society. 32, 16, p. 4185-4193 9 p.

    Research output: Contribution to journalArticlepeer-review

  62. Published

    Morphological characterization of sub-micron PDMS bowl structures

    Ali Mohammadkhani & Kyle Jiang, 22 Nov 2012, 2012 12th IEEE International Conference on Nanotechnology, NANO 2012. 6321998

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    Nanopatterning of metallic features over uniformed arrays of microbowl structures

    Ali Mohammadkhani, Hany Hassanin, Carl Anthony & Kyle Jiang, 1 Oct 2012, In: Microelectronic Engineering. 98, p. 266-269 4 p.

    Research output: Contribution to journalArticlepeer-review

  64. Published

    Modeling fluid flow in the gas diffusion layers in PEMFC using the multiple relaxation-time lattice Boltzmann method

    Kyle Jiang, 1 Jun 2012, In: Fuel Cells. 12, 3, p. 365-381 17 p.

    Research output: Contribution to journalArticlepeer-review

  65. Published
  66. Published

    Simulation of Liquid Water Breakthrough in a Nanotomography Reconstruction of a Carbon Paper Gas-Diffusion Layer

    Kyle Jiang, 1 Feb 2012, In: AIChE Journal. 58, 2, p. 646-655 10 p.

    Research output: Contribution to journalArticle

  67. Published

    Ceramic nanocomposite by electrodeposition of nickel into porous alumina matrix

    Hany Hassanin, Ali Mohammadkhani & Kyle Jiang, 1 Jan 2012, Proceedings of the IEEE Conference on Nanotechnology.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  68. Published

    Fabrication of hybrid nanostructured arrays using a PDMS/PDMS replication process

    Hany Hassanin, Ali Mohammadkhani & Kyle Jiang, 1 Jan 2012, In: Lab on a Chip. 12, 20, p. 4160-4167 8 p.

    Research output: Contribution to journalArticlepeer-review

  69. 2011
  70. Published

    3D visualization and characterization of nano structured materials

    Kyle Jiang, 1 Dec 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 770-775 6 p. 6144402

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. Published

    Estimation of AFM Tip Shape and Status in Linewidth and Profile Measurement

    Phil Prewett & Kyle Jiang, 1 Dec 2011, p. 11041-11044. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  72. Published

    Preliminary investigation of surface characteristics of articular cartilage with 3-D tomography

    Duncan Shepherd & Kyle Jiang, 1 Dec 2011, 2011 International Conference on Nanoscience, Technology and Societal Implications, NSTSI11. 6111998

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Published

    Multiple replication of thick PDMS micropatterns using surfactants as release agents

    Hany Hassanin & Kyle Jiang, 1 Nov 2011, In: Microelectronic Engineering. 88, 11, p. 3275-3277 3 p.

    Research output: Contribution to journalArticle

  74. Published

    Characterization of surface properties of glass micropipettes using SEM stereoscopic technique

    Majid Malboubi & Kyle Jiang, 1 Aug 2011, In: Microelectronic Engineering. 88, 8, p. 2666-2670 5 p.

    Research output: Contribution to journalArticle

  75. Published
  76. Published

    Surface properties of glass micropipettes and their effect on biological studies

    Majid Malboubi & Kyle Jiang, 1 May 2011, In: Nanoscale Research Letters. 6, p. 401 1 p.

    Research output: Contribution to journalArticle

  77. Published
  78. Published

    Macroscopic invisibility cloaking of visible light

    Xianzhong Chen, Kyle Jiang & Shuang Zhang, 4 Jan 2011, In: Nature Communications. 2, 1, 176.

    Research output: Contribution to journalArticlepeer-review

  79. 2010
  80. Published

    Multi-scale simulation of single-phase multi-component transport in the cathode gas diffusion layer of a polymer electrolyte fuel celltalized

    Kyle Jiang, 1 Dec 2010, Fuel Cell Membranes, Electrode Binders, and MEA Performance. 27 ed. Vol. 28. p. 103-111 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. Published

    A comparison of surface roughness analysis methods applied to urinary catheters

    Kyle Jiang & David Hukins, 1 Oct 2010, In: Precision Engineering. 34, 4, p. 798-801 4 p.

    Research output: Contribution to journalArticle

  82. Published

    Three-dimensional surface reconstruction of diatomaceous frustules

    Xianzhong Chen & Kyle Jiang, 1 Aug 2010, In: Analytical Biochemistry. 403, 1-2, p. 63-66 4 p.

    Research output: Contribution to journalArticle

  83. Published
  84. Published
  85. Published

    Experimental and simulation study of the effect of pipette roughness on giga-seal formation in patch clamping

    Kyle Jiang, 1 May 2010, p. 778-781. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  86. Published

    Fabrication of 316-L stainless steel micro components using encapsulating soft mould and isopressing technique

    Kyle Jiang & Isaac Chang, 1 May 2010, p. 1623-1628. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  87. Published

    Functionally graded microceramic components

    Kyle Jiang, 1 May 2010, p. 1610-1613. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  88. Published
  89. Published

    Nanotomography based study of gas diffusion layers

    Kyle Jiang, 1 May 2010, p. 1640-1642. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  90. Published

    Optimized process for the fabrication of zirconia micro parts

    Kyle Jiang, 1 May 2010, p. 1617-1619. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  91. Published

    Sensitivity enhancement of SPR biosensor by improving surface quality of glass slides

    Xianzhong Chen & Kyle Jiang, 1 May 2010, p. 790-792. 3 p.

    Research output: Contribution to conference (unpublished)Paper

  92. Published

    Stainless steel-titania composite micro gear fabricated by soft moulding and dispersing technique

    Kyle Jiang, 1 May 2010, p. 1650-1654. 5 p.

    Research output: Contribution to conference (unpublished)Paper

  93. Published

    3D reconstruction of a gas diffusion layer and a microporous layer

    Kyle Jiang, 1 Apr 2010, In: Journal of Membrane Science. 351, 1-2, p. 69-74 6 p.

    Research output: Contribution to journalArticle

  94. Published

    Threshold Fine-Tuning and 3D Characterisation of Porous Media Using X-ray Nanotomography

    Kyle Jiang, 1 Apr 2010, In: Current Nanoscience. 6, 2, p. 226-231 6 p.

    Research output: Contribution to journalArticle

  95. Published
  96. Published
  97. Published

    Effect of aging on optical properties of bimetallic sensor chips

    Xianzhong Chen & Kyle Jiang, 1 Jan 2010, In: Optics Express. 18, 2, p. 1105-1112 8 p.

    Research output: Contribution to journalArticle

  98. Published
  99. Published

    Infiltration-Processed, Functionally Graded Materials for Microceramic Componenets

    Hany Hassanin & Kyle Jiang, 1 Jan 2010, p. 368-371. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  100. Published

    Micro fabrication of stainless steel micro components using soft moulding and aqueous slurry

    Kyle Jiang, 1 Jan 2010, In: Microelectronic Engineering. 87, 1, p. 72-78 7 p.

    Research output: Contribution to journalArticle

  101. Published

    Micro machine parts fabricated from Aqueous based stainless steel slurry

    Kyle Jiang, 1 Jan 2010, Electronic Engineering and Computing Technology. Vol. 60.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  102. Published
  103. Published

    Study of the Tip Surface Morphology of glass micropipettes and its effect on Giga-Seal formation

    Kyle Jiang, 1 Jan 2010, Electronic Engineering and computing Technology. Vol. 60.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  104. Published
  105. Published

    Surface property characterization of ordered nanostructure using SEM stereoscopic technique

    Carl Anthony & Kyle Jiang, 1 Jan 2010.

    Research output: Contribution to conference (unpublished)Paper

  106. Published

    Study of the tip surface morphology of glass micropipettes and its effects on gigaseal formation

    Majid Malboubi, Kyle Jiang & Yuchun Gu, 2010, Electronic Engineering and Computing Technology.

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  107. 2009
  108. Published

    Fabrication of alumina composite microengine parts using softlithography

    Hany Hassanin & Kyle Jiang, 1 Dec 2009, SAE Technical Papers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  109. Published
  110. Published
  111. Published

    Fabrication of free standing 316-L stainless steel-Al2O3 composite micro machine parts by soft moulding

    Kyle Jiang, 1 Sep 2009, In: Acta Materialia. 57, 16, p. 4751-4757 7 p.

    Research output: Contribution to journalArticle

  112. Published

    Characterisation of stainless steel microparts fabricated by soft moulding technique

    Kyle Jiang, 1 Jun 2009, In: Micro & Nano Letters. 4, 2, p. 99-105 7 p.

    Research output: Contribution to journalArticle

Previous 1 2 Next