Karl Dearn, Reader In Mechanical Engineering

Publications

  1. Published
  2. Published
  3. Published

    A tribological assessment of a PEEK based self-mating total cervical disc replacement

    Duncan Shepherd & Karl Dearn, 15 Jun 2013, In: Wear. 303, 1-2, p. 473-479 7 p.

    Research output: Contribution to journalArticlepeer-review

  4. Published

    Acoustic Emissions from Polymeric Gears

    Karl Dearn & Doug Walton, 1 Jan 2009, p. 1832-1837. 6 p.

    Research output: Contribution to conference (unpublished)Paper

  5. Published

    Acoustic noise from polymer gears - A tribological investigation

    Karl Dearn, Stephen Kukureka & Doug Walton, 1 Jun 2011, In: Materials & Design. 32, 6, p. 3509-3515 7 p.

    Research output: Contribution to journalArticle

  6. Published

    Adapting to engineering educational and teaching challenges

    Karl Dearn, Athanasios Tsolakis, & Doug Walton, 1 Jul 2010, Proceedings of the 3rd International Symposium for Engineering Education: (ISEE 2010). Byrne, E. (ed.). Cork, Ireland: University College Cork, p. 58-66 (Proceedings of the International Symposium for Engineering Education; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    An investigation into the characteristics of DISI injector deposits using advanced analytical methods

    Karl Dearn, , , Hongming Xu, , , , & , 13 Oct 2014, In: SAE International Journal of Fuels and Lubricants. 7, 3, p. 771-782

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Analysis of gear quality criteria and performance of curved facewidth plastic spur gears

    Doug Walton & Karl Dearn, 17 Nov 2007.

    Research output: Contribution to conference (unpublished)Poster

  9. Published
  10. Published

    Applications of dry film lubricants for polymer gears

    Karl Dearn, , , Sophie Dearn & , 15 Feb 2013, In: Wear. 298–299, 0, p. 99-108 10 p.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    Combustion characteristics and emissions of Fischer-Tropsch diesel fuels in IC engines

    Athanasios Tsolakis, Karl Dearn & , 1 Aug 2011, In: Progress in Energy and Combustion Science. 37, 4, p. 503-523 21 p.

    Research output: Contribution to journalReview articlepeer-review

  12. E-pub ahead of print

    Comparison of the mechanical properties of two designs of polyaxial pedicle screw

    Alicja Kubiak, , Karl Dearn & Duncan Shepherd, 23 Aug 2018, (E-pub ahead of print) In: Engineering Failure Analysis.

    Research output: Contribution to journalArticlepeer-review

  13. Published

    Corrosion and tribological performance of quasi-stoichiometric titanium containing carbo-nitride coatings

    Catalin Pruncu, , Karl Dearn, , , , , & , Nov 2017, In: Arabian Journal of Chemistry. 10, 7, p. 1015-1028 14 p.

    Research output: Contribution to journalArticlepeer-review

  14. Published

    Crack growth in medical-grade silicone and polyurethane ether elastomers

    Karl Dearn & Duncan Shepherd, 1 Sep 2017, In: Polymer Testing. 62, p. 225-234

    Research output: Contribution to journalArticlepeer-review

  15. Published
  16. Published
  17. Published

    Diameter Estimation of Fallopian Tubes Using Visual Sensing

    Amir Hajiyavand, & Karl Dearn, 1 Apr 2021, In: Biosensors. 11, 4, 100.

    Research output: Contribution to journalArticlepeer-review

  18. Published

    Driving forward - polymer composite machine elements in automotive applications

    Karl Dearn, Doug Walton & , 17 Mar 2009.

    Research output: Contribution to conference (unpublished)Paper

  19. Published

    Effect of TiF3 catalyst on the tribological properties of carbon black-contaminated engine oils

    Karl Dearn & Hongming Xu, 30 Jul 2013, In: Wear. 305, 1-2, p. 166-176

    Research output: Contribution to journalArticlepeer-review

  20. Published

    Effect of batch initial velocity on the glass furnace efficiency

    Karl Dearn, & , 10 Jan 2014, TMS Annual Meeting. The Minerals, Metals and Materials Society, p. 207-213 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Effect of catalytic esterification on the friction and wear performance of bio-oil

    Karl Dearn & , 15 Mar 2014, In: Wear. 311, 1-2, p. 93-100 8 p.

    Research output: Contribution to journalArticlepeer-review

  22. E-pub ahead of print

    Effect of emulsified biomass-fuel on the film formation behavior of diesel engine lubricating oil

    Karl Dearn, , , & , 2 Dec 2016, (E-pub ahead of print) In: Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section). 32, 6, p. 1142-1149 8 p.

    Research output: Contribution to journalArticlepeer-review

  23. Published
  24. Published
  25. Published

    Engineering polymers and composites for machine elements

    Karl Dearn, Stephen Kukureka & Doug Walton, 17 Mar 2009, Polymer Tribology. Sinha, S. K. & Briscoe, B. J. (eds.). London: Imperial College Press, p. 482-519 38 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  26. Published

    Engineering polymers and composites for machine elements

    Karl Dearn, Stephen Kukureka & , 7 Mar 2018, Handbook of Polymer Tribology. Kumar Sinha, S. (ed.). World Scientific, p. 441-479 39 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  27. Published

    Enhancing the lubricity of an environmentally friendly Swedish diesel fuel MK1

    Karl Dearn, 29 Jul 2011, p. 1772-1777. 6 p.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  28. Published

    Experimental investigation on lubricity of 2,5-dimethylfuran blends

    Mirek Wyszynski, Athanasios Tsolakis, Hongming Xu, & Karl Dearn, Jan 2012, In: Combustion Engines. XLXI, p. 3-10

    Research output: Contribution to journalArticlepeer-review

  29. Published

    Fabrication and tribological characterization of laser textured boron cast iron surfaces

    Karl Dearn, , & , 15 Mar 2017, In: Surface and Coatings Technology. 313, p. 391-401

    Research output: Contribution to journalArticlepeer-review

  30. Published
  31. Published

    Friction-Induced Transformation from Graphite Dispersed in Esterified Bio-Oil to Graphene

    Karl Dearn & , Aug 2016, In: Tribology Letters. 63, 11 p., 18.

    Research output: Contribution to journalArticlepeer-review

  32. Published
  33. Published

    Improvement of the tribological behaviour of palm biodiesel via partial hydrogenation of unsaturated fatty acid methyl esters

    Bell Poapongsakorn, & Karl Dearn, 30 Apr 2019, In: Wear. 426-427, PART A, p. 813-818 6 p.

    Research output: Contribution to journalConference articlepeer-review

  34. Published

    Improving Ethanol-Diesel Blend Through the Use of Hydroxylated Biodiesel

    Martin Herreros, Karl Dearn & Athanasios Tsolakis, 13 Oct 2014.

    Research output: Contribution to conference (unpublished)Otherpeer-review

  35. Published
  36. Published

    Interrogating the surface: The effect of blended diesel fuels on lubricity

    Karl Dearn & Athanasios Tsolakis, 1 Jan 2012, In: SAE International Journal of Fuels and Lubricants. 5, 1, p. 154-162 9 p.

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Investigation into the morphology, composition, structure and dry tribological behavior of rice husk ceramic particles

    Karl Dearn, , & , 15 Mar 2016, In: Applied Surface Science. 366, p. 372-382 11 p.

    Research output: Contribution to journalArticlepeer-review

  38. Published

    Investigation of the lubrication properties and tribological mechanisms of oxygenated compounds

    Karl Dearn, & , 15 Apr 2017, In: Wear. 376-377, Part A, p. 836-842 7 p.

    Research output: Contribution to journalArticlepeer-review

  39. Published

    Lubrication regimes in high-performance polymer spur gears

    Karl Dearn, , Doug Walton & , 1 Jan 2013, In: Advances in Tribology.

    Research output: Contribution to journalArticlepeer-review

  40. Published

    Mechanical performance of PEEK produced by additive manufacturing

    Karl Dearn & Stephen Kukureka, 1 Sep 2018, In: Polymer Testing. 70, p. 511-519 9 p.

    Research output: Contribution to journalArticlepeer-review

  41. Published
  42. Published
  43. Published

    Nano-MoS2 and Graphene Additives in Oil for Tribological Applications

    Karl Dearn & , 2018, Nanotechnology in Oil and Gas Industries: Principles and Applications. Saleh, T. (ed.). Springer, p. 151-191 40 p. (Topics in Mining, Metallurgy and Materials Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)peer-review

  44. Published

    Novel in situ tribo-catalysis for improved tribological properties of bio-oil model compound

    Karl Dearn, & , 15 Jan 2018, In: Fuel. 212, p. 546-553 8 p.

    Research output: Contribution to journalArticlepeer-review

  45. Published

    Numerical Investigation of GDI Injector Nozzle Geometry on Spray Characteristics

    Hongming Xu, Dhananjay Srivastava, Karl Dearn, , , & , 1 Sep 2015, SAE Technical Paper . SAE International, Vol. 2015-01-1906. 13 p. 2015-01-1906. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Published

    On the fundamental lubricity of 2,5-dimethylfuran as a synthetic engine fuel

    Karl Dearn & Hongming Xu, Nov 2012, In: Tribology International. 55, p. 119-125

    Research output: Contribution to journalArticlepeer-review

  47. Published
  48. Published

    Role of TiF3 catalyst in the tribological properties of biofuel soot-contaminated liquid paraffin

    Karl Dearn & Hongming Xu, 1 Sep 2014, In: Tribology International. 77, p. 122-131 10 p.

    Research output: Contribution to journalArticlepeer-review

  49. Published

    Strength of poly-ether-ether-ketone : effects of sterilisation and thermal ageing

    Duncan Shepherd & Karl Dearn, 1 Sep 2013, In: Polymer Testing. 32, 6, p. 1001-1005 5 p.

    Research output: Contribution to journalArticlepeer-review

  50. Published

    Surface modified rice husk ceramic particles as a functional additive: Improving the tribological behaviour of aluminium matrix composites

    Karl Dearn, & , 1 May 2018, In: Carbon Letters. 26, 1, p. 51-60 10 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 Next