Chuan-yu Wu

(Former)

Publications

  1. 2021
  2. Published
  3. 2016
  4. E-pub ahead of print

    DEM-CFD analysis of contact electrification and electrostatic interactions during fluidization

    Chuan-yu Wu & Mike Adams, 12 Aug 2016, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  5. Published

    Particle Technology and Engineering: An Engineer's Guide to Particles, Powders and Multiphase Systems

    Jonathan Seville & Chuan-yu Wu, 20 May 2016, 1st ed. Butterworth-Heinemann. 294 p.

    Research output: Book/ReportBook

  6. 2015
  7. Published
  8. Published

    Numerical analysis of contact electrification of non-spherical particles in a rotating drum

    Chuan-yu Wu & Mike Adams, Nov 2015, In: Powder Technology. 285, p. 110-122 13 p.

    Research output: Contribution to journalArticlepeer-review

  9. Published
  10. 2012
  11. Published

    Numerical modelling of suction filling using DEM/CFD

    Chuan-yu Wu & , 1 May 2012, In: Chemical Engineering Science. 73, p. 231-238 8 p.

    Research output: Contribution to journalArticle

  12. Published
  13. Published

    Rebound of a particle from a solid surface with a viscous or nonlinear viscoelastic liquid film in the contact zone

    James Bowen, David Cheneler, James Andrews, Chuan-yu Wu, Michael Ward & Mike Adams, 2012, Discrete Element Modelling of Particulate Media. Cambridge: Royal Society of Chemistry, p. 86-94

    Research output: Chapter in Book/Report/Conference proceedingChapter

  14. 2011
  15. Published

    The saltations of different sized particles in aeolian sand transport

    Chuan-yu Wu & Mike Adams, 1 Nov 2011, In: Geomorphology. 134, 3-4, p. 217-223 7 p.

    Research output: Contribution to journalArticle

  16. Published
  17. Published

    3D DEM/CFD analysis of size-induced segregation during die filling

    Yu Guo, Chuan-yu Wu, & Colin Thornton, 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 177-188 12 p.

    Research output: Contribution to journalArticle

  18. 2010
  19. Published

    Predicting the pressure distribution during roll compaction from uniaxial compaction measurements

    Mike Adams, , & Chuan-yu Wu, 1 Nov 2010, p. 410-417. 8 p.

    Research output: Contribution to conference (unpublished)Paper

  20. Published

    Analytical solutions for roll compaction of pharmaceutical powders

    James Andrews, , , , , Chuan-yu Wu & Mike Adams, 1 Oct 2010, In: Journal of Pharmacy and Pharmacology. 62, 10, p. 1403-1404 2 p.

    Research output: Contribution to journalArticle

  21. Published

    Exploring roll compaction of two commonly used pharmaceutical powders

    Chuan-yu Wu & Mike Adams, 1 Oct 2010, In: Journal of Pharmacy and Pharmacology. 62, 10, p. 1434-1435 2 p.

    Research output: Contribution to journalArticle

  22. Published

    Modelling of the flow of cohesive powders during pharmaceutical tabletting

    Chuan-yu Wu & Yu Guo, 1 Oct 2010, In: Journal of Pharmacy and Pharmacology. 62, 10, p. 1450-1451 2 p.

    Research output: Contribution to journalArticle

  23. Published

    Numerical analysis of electrostatic effects during powder deposition using DEM/CFD

    Chuan-yu Wu, & , 1 Oct 2010, In: Journal of Pharmacy and Pharmacology. 62, 10, p. 1454-1455 2 p.

    Research output: Contribution to journalArticle

  24. Published

    Roller compaction of moist pharmaceutical powders

    Chuan-yu Wu, , , & , 1 May 2010, In: International Journal of Pharmaceutics. 391, 1-2, p. 90-97 8 p.

    Research output: Contribution to journalArticle

  25. Published

    Numerical analysis of density-induced segregation during die filling

    Chuan-yu Wu, & Colin Thornton, 1 Jan 2010, In: Powder Technology. 197, 1-2, p. 111-119 9 p.

    Research output: Contribution to journalArticle

  26. Published
  27. 2009
  28. Published

    DEM/CFD modelling of the deposition of dilute granular systems in a vertical container

    Chuan-yu Wu, 27 Jul 2009, In: Chinese Science Bulletin. 54, 23, p. 4318-4326 9 p.

    Research output: Contribution to journalArticle

  29. Published
  30. Published

    A Coupled DEM/CFD Analysis of the Effect of Air on Powder Flow During Die Filling

    Chuan-yu Wu, & , 1 Jan 2009, In: AIChE Journal. 55, 1, p. 49-62 14 p.

    Research output: Contribution to journalArticle

  31. Published

    Comparative study of powder compression behaviour during roller compaction and uniaxial compaction

    Mike Adams, & Chuan-yu Wu, 1 Jan 2009.

    Research output: Contribution to conference (unpublished)Paper

  32. Published

    Competing Flow of Dissimilar Granular Materials in Air

    Chuan-yu Wu, , & Colin Thornton, 1 Jan 2009, p. 985-988. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  33. Published

    Predicting Rebound Kinematics of Elastic and Rigid Particles Resulting from Oblique Impacts

    Chuan-yu Wu, Colin Thornton & Long-yuan Li, 1 Jan 2009, p. 755-758. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  34. 2008
  35. Published

    DEM simulations of die filling during pharmaceutical tabletting

    Chuan-yu Wu, 1 Dec 2008, In: Particuology. 6, 6, p. 412-418 7 p.

    Research output: Contribution to journalArticle

  36. Published

    The effect of lubrication on density distributions of roller compacted ribbons

    Chuan-yu Wu & , 1 Oct 2008, In: International Journal of Pharmaceutics. 362, 1-2, p. 52-59 8 p.

    Research output: Contribution to journalArticle

  37. Published

    Numerical and experimental investigation of capping mechanisms during pharmaceutical tablet compaction

    Chuan-yu Wu, , , , & , 6 Feb 2008, In: Powder Technology. 181, 2, p. 121-129 9 p.

    Research output: Contribution to journalArticle

  38. Published

    A comparative study of compaction properties of binary and bi-layered tablets

    Chuan-yu Wu & Jonathan Seville, 1 Jan 2008, In: Powder Technology. 189, 2, p. 285-294 10 p.

    Research output: Contribution to journalArticle

  39. Published
  40. Published

    Rebound behaviour of spheres during elastic-plastic oblique impact

    Chuan-yu Wu, Colin Thornton & Long-yuan Li, 1 Jan 2008, In: International Journal of Modern Physics B. 22, 9 & 11, p. 1095-1102 8 p.

    Research output: Contribution to journalArticle

  41. 2007
  42. Published
  43. 2006
  44. Published

    Predicting the tensile strength of multi-component pharmaceutical tablets

    Chuan-yu Wu, , , & , 1 Aug 2006, In: Pharmaceutical Research. 23, 8, p. 1898-1905 8 p.

    Research output: Contribution to journalArticle

  45. Published

    Numerical and experimental investigations of the flow of powder into a confined space

    Chuan-yu Wu & , 1 Apr 2006, In: Mechanics of Materials. 38, 4, p. 304-324 21 p.

    Research output: Contribution to journalArticle

  46. 2005
  47. Published

    Energy dissipation during normal impact of elastic-plastic spheres

    Chuan-yu Wu, & Colin Thornton, 1 Dec 2005, In: International Journal of Impact Engineering. 32, p. 593-604 12 p.

    Research output: Contribution to journalArticle

  48. Published

    Modelling the mechanical behaviour of pharmaceutical powders during compaction

    Chuan-yu Wu, , , , & , 29 Apr 2005, In: Powder Technology. 152, 1-3, p. 107-117 11 p.

    Research output: Contribution to journalArticle

  49. Published

    A simple predictive model for the tensile strength of binary tablets

    Chuan-yu Wu, , , & , 28 Apr 2005, In: European Journal of Pharmaceutical Science. 25, 2-3, p. 332-336 5 p.

    Research output: Contribution to journalArticle

  50. Published

    Experimental and numerical study of die filling, powder transfer and die compaction

    Chuan-yu Wu, 1 Mar 2005, In: Powder Metallurgy. 48, 1, p. 68-76 9 p.

    Research output: Contribution to journalArticle

  51. 2004
  52. Published

    Flow behaviours of powders during die filling

    Chuan-yu Wu & , 1 Mar 2004, In: Powder Metallurgy. 47, 2, p. 127-136 10 p.

    Research output: Contribution to journalArticle

  53. 2003
  54. Published

    Experimental and numerical investigations of powder transfer

    Chuan-yu Wu, , & , 1 Dec 2003, In: Powder Technology. 138, 2-3, p. 216-228 13 p.

    Research output: Contribution to journalArticle

  55. Published

    Coefficients of restitution for elastoplastic oblique impacts

    Chuan-yu Wu, Colin Thornton & , 29 Nov 2003, In: Advanced Powder Technology. 14, 4, p. 435-448 14 p.

    Research output: Contribution to journalArticle

  56. Published

    Rebound behaviour of spheres for plastic impacts

    Chuan-yu Wu, & Colin Thornton, 1 Oct 2003, In: International Journal of Impact Engineering. 28, 9, p. 929-946 18 p.

    Research output: Contribution to journalArticle

  57. Published

    The flow of powder into simple and stepped dies

    Chuan-yu Wu, & , 5 Aug 2003, In: Powder Technology. 134, 1-2, p. 24-39 16 p.

    Research output: Contribution to journalArticle

  58. Published

    Die filling and powder transfer

    Chuan-yu Wu, & , 1 Jan 2003, In: International Journal of Powder Metallurgy. 39, 4, p. 51-64 14 p.

    Research output: Contribution to journalArticle

  59. Published
  60. 2002
  61. Published