Andy Ingram

Publications

  1. 2021
  2. Published

    Synergistic dual catalytic system and kinetics for the alcoholysis of poly(lactic acid)

    Andy Ingram & Joe Wood, 24 May 2021, In: Processes. 9, 6, 15 p., 921.

    Research output: Contribution to journalArticlepeer-review

  3. 2020
  4. Published
  5. Published
  6. Published
  7. Published

    Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

    Andy Ingram & Gary Leeke, 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. 2019
  9. Published
  10. Published

    Modelling and parameter estimation of breakthrough curves for amine-modified activated carbons under pre-combustion carbon capture conditions

    Andy Ingram & Joe Wood, 1 Oct 2019, In: Fuel. 253, p. 1130-1139 10 p.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    Catalytic degradation of a carbon fibre reinforced polymer for recycling applications

    Gary Leeke & Andy Ingram, Aug 2019, In: Polymer Degradation and Stability . 166, p. 188-201 14 p.

    Research output: Contribution to journalArticlepeer-review

  12. Published
  13. Published
  14. Published
  15. Published

    The build-up of detergent agglomerates in an auger filler

    Christopher Hewitt, Richard Greenwood & Andy Ingram, 15 Feb 2019, In: Powder Technology. 344, p. 628-635 8 p.

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Towards the application of large mordenite particles as Positron Emission Particle Tracking tracers

    Andy Ingram & Joseph Hriljac, 1 Jan 2019, In: MRS Advances. 4, 1, p. 21-26 6 p.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Sn6SiO8, a Tin(II) Silicate with a Zinc Blende Related Structure andHigh Thermal Stability

    Joseph Hriljac, Sav Savva & Andy Ingram, 2019, In: Inorganic Chemistry. 58, p. 16313-16316 4 p.

    Research output: Contribution to journalArticlepeer-review

  18. 2018
  19. Published
  20. 2017
  21. Published

    Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent

    Andy Ingram & Gary Leeke, 26 Aug 2017, ICCM21. International Committee on Composite Materials (ICCM), Vol. 21. 9 p. 4054

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Published

    Effect of operating parameters on fine particle grinding in a vertically stirred media mill

    Neil Rowson & Andy Ingram, 13 Apr 2017, In: Separation Science and Technology . 52, 6, p. 1143-1152 10 p.

    Research output: Contribution to journalArticlepeer-review

  23. 2016
  24. Published

    Mixing performance of viscoelastic fluids in a kenics km in-line static mixer

    Mark Simmons, Andy Ingram, Nov 2016, In: Chemical Engineering Research and Design. 115, Part B, p. 310–324

    Research output: Contribution to journalArticlepeer-review

  25. Published
  26. E-pub ahead of print

    Velocity field characterization of Newtonian and non-Newtonian fluids in SMX mixers using PEPT

    Andy Ingram & Serafim Bakalis, 12 Mar 2016, (E-pub ahead of print) In: Chemical Engineering Research and Design.

    Research output: Contribution to journalArticlepeer-review

  27. E-pub ahead of print

    Asymmetric distribution in twin screw granulation

    Neil Rowson & Andy Ingram, 25 Jan 2016, (E-pub ahead of print) In: European Journal of Pharmaceutics and Biopharmaceutics.

    Research output: Contribution to journalArticlepeer-review

  28. Published

    Mixing of Newtonian and viscoelastic fluids using “butterfly” impellers

    Mark Simmons, Andy Ingram, 12 Jan 2016, In: Chemical Engineering Science. 139, p. 125-141

    Research output: Contribution to journalArticlepeer-review

  29. 2015
  30. Published
  31. Published

    PEPT study of particle cycle and residence time distributions in a Wurster fluid bed

    Andy Ingram, Mar 2015, In: AIChE Journal. 61, 3, p. 756-768 13 p.

    Research output: Contribution to journalArticlepeer-review

  32. E-pub ahead of print

    Twin Screw Granulation – A Literature Review

    Neil Rowson, Andy Ingram, 7 Feb 2015, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  33. Published
  34. 2014
  35. Published
  36. Published

    An investigation into the feasibility of radioactive gas imaging for studies in process tomography

    Andy Ingram, Thomas Leadbeater & David Parker, 1 Jan 2014, 7th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 897-906 10 p. (7th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published
  38. Published

    Relationship between single and bulk mechanical properties for zeolite ZSM5 spray-dried particles

    James Bowen & Andy Ingram, 2014, In: Particuology. 14, p. 130-138

    Research output: Contribution to journalArticlepeer-review

  39. 2013
  40. Published
  41. Published
  42. Published
  43. Published
  44. Published

    Regime map development for continuous twin screw granulation

    Andy Ingram & Jonathan Seville, 14 Jan 2013, In: Chemical Engineering Science. 87, p. 315-326 12 p.

    Research output: Contribution to journalArticlepeer-review

  45. 2012
  46. Published
  47. Published
  48. Published

    A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions

    Andy Ingram, 1 Feb 2012, In: Powder Technology. 217, p. 540-547 8 p.

    Research output: Contribution to journalArticlepeer-review

  49. Published

    Energy and carbon payback times for solid oxide fuel cell based domestic CHP

    Iain Staffell, Andy Ingram, 1 Feb 2012, In: International Journal of Hydrogen Energy. 37, 3, p. 2509-2523 15 p.

    Research output: Contribution to journalArticle

  50. 2011
  51. Published
  52. Published
  53. Published

    Three-Dimensional Visualization of Powder Motion in a High Shear Mixer

    Andy Ingram, 1 Aug 2011, In: MATERIALS TRANSACTIONS. 52, 8, p. 1693-1696 4 p.

    Research output: Contribution to journalArticle

  54. Published

    A new approach to high-shear mixer granulation using positron emission particle tracking

    Andy Ingram, 1 Feb 2011, In: Chemical Engineering Science. 66, 4, p. 563-569 7 p.

    Research output: Contribution to journalArticle

  55. 2010
  56. Published
  57. Published
  58. Published
  59. Published

    Life cycle assessment of an alkaline fuel cell CHP system

    Iain Staffell & Andy Ingram, 1 Mar 2010, In: International Journal of Hydrogen Energy. 35, 6, p. 2491-2505 15 p.

    Research output: Contribution to journalArticle

  60. Published

    The wurster coater

    Andy Ingram & Jonathan Seville, 1 Jan 2010, Spouted and Spout-Fluid Beds: Fundamentals and Applications. Cambridge University Press, Vol. 9780521517973. p. 238-249 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  61. 2009
  62. Published

    3D numerical simulation and PEPT experimental investigation of pressurized gas-solid fluidized bed hydrodynamic

    Andy Ingram, 1 Dec 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART C ed. p. 1833-1842 10 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    Visualization of Powder Mixing in a High Shear Mixer using Positron Emission Particle Tracking

    Andy Ingram, 1 Oct 2009, In: Journal of Visualization. 12, 4, p. 291-292 2 p.

    Research output: Contribution to journalArticle

  64. Published

    Chapter 4 Positron emission imaging in Chemical Engineering

    Jonathan Seville, Andy Ingram, Xianfeng Fan & David Parker, 7 Sep 2009, Characterization of Flow, Particles and Interfaces. Li, J. (ed.). Elsevier, p. 149-178 30 p. (Advances in Chemical Engineering; vol. 37).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  65. Published

    Positron emission particle tracking using a modular positron camera

    David Parker, Thomas Leadbeater, Xianfeng Fan, Andy Ingram, 1 Jun 2009, p. 339-342. 4 p.

    Research output: Contribution to conference (unpublished)Paper

  66. Published
  67. Published

    Exploring the regime map for high-shear mixer granulation

    Andy Ingram, 1 Jan 2009, In: Chemical Engineering Journal. 145, 3, p. 505-513 9 p.

    Research output: Contribution to journalArticle

  68. Published

    MuPEPT: A new method for non-invasively particulate flows

    Serafim Bakalis, Andy Ingram, Peter Fryer, 1 Jan 2009.

    Research output: Contribution to conference (unpublished)Paper

  69. Published

    Positron Emission Particle Tracking Applied to High Shear Mixer Processing

    Xianfeng Fan, Andy Ingram, 1 Jan 2009, In: MATERIALS TRANSACTIONS. 50, 9, p. 2341-2343 3 p.

    Research output: Contribution to journalArticle

  70. 2008
  71. Published

    Analysis of operating conditions of a continuous powder mixer using pept

    Andy Ingram, Jonathan Seville, 1 Dec 2008, AIChE100 - 2008 AIChE Annual Meeting, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Published
  73. Published
  74. Published

    PEPT and discrete particle simulation study of spout-fluid bed regimes

    Xianfeng Fan, Andy Ingram, David Parker, Joe Wood & Jonathan Seville, 1 Jan 2008, In: AIChE Journal. 54, 5, p. 1189-1202 14 p.

    Research output: Contribution to journalArticle

  75. Published
  76. 2007
  77. Published

    Developments in PET and PEPT at Birmingham

    David Parker, Xianfeng Fan, Marc Hausard, Andy Ingram, Thomas Leadbeater, 1 Jan 2007, 5th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 290-296 7 p. (5th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. 2006
  79. Published

    Tracking pellet motion in a wurster coater using positron emission

    Jonathan Seville, Andy Ingram & Xianfeng Fan, 1 Dec 2006.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  80. Published
  81. Published

    Three-dimensional representations of powder mixedness using a positron emission tracking technique

    Jonathan Seville, Xianfeng Fan, Andy Ingram, David Parker, 24 Apr 2006.

    Research output: Contribution to conference (unpublished)Paperpeer-review

  82. Published

    Instabilities in vertically vibrated granular beds at the single particle scale

    Xianfeng Fan, David Parker, Andy Ingram & Jonathan Seville, 1 Jan 2006, In: Physics of Fluids. 18(4), p. 043302 1 p.

    Research output: Contribution to journalArticle

  83. 2005
  84. Published

    Axial and radial dispersion in rolling mode rotating drums

    Andy Ingram, Jonathan Seville, David Parker, Xianfeng Fan, 27 Oct 2005, In: Powder Technology. 158, 1-3, p. 76-91 16 p.

    Research output: Contribution to journalArticle

  85. Published
  86. Published
  87. Published

    Comparison of PEPT measurements and discrete particle simulations in a rectangular 3D spout fluid bed

    Xianfeng Fan, Joe Wood, Andy Ingram, David Parker, 1 Jan 2005, p. 551. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  88. Published

    Developments in PEPT for process applications

    David Parker, Xianfeng Fan & Andy Ingram, 1 Jan 2005, 4th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 825-830 6 p. (4th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  89. Published

    Particle tracking to investigate flow behaviour in a novel rotary gas/solid contactor

    Andy Ingram, Joe Wood, Jonathan Seville, Xianfeng Fan & David Parker, 1 Jan 2005, p. 82. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  90. Published

    Probing processes using positrons

    Jonathan Seville, Andy Ingram & David Parker, 1 Jan 2005, In: Chemical Engineering Research and Design. 83, A7, p. 788-793 6 p.

    Research output: Contribution to journalArticle

  91. 2004
  92. Published

    Direct measurement of the adhesive force between fly ash particles at high temperature

    Hisham Mashmoushy, Andy Ingram, Zhibing Zhang & Jonathan Seville, 1 Jan 2004, p. 461. 1 p.

    Research output: Contribution to conference (unpublished)Paper

  93. Published