Andy Ingram

Publications

  1. Chapter › Research
  2. Published

    Chapter 4 Positron emission imaging in Chemical Engineering

    Jonathan Seville, Andy Ingram, Xianfeng Fan & David Parker, 7 Sep 2009, Characterization of Flow, Particles and Interfaces. Li, J. (ed.). Elsevier, p. 149-178 30 p. (Advances in Chemical Engineering; vol. 37).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  3. Published

    The wurster coater

    Andy Ingram & Jonathan Seville, 1 Jan 2010, Spouted and Spout-Fluid Beds: Fundamentals and Applications. Cambridge University Press, Vol. 9780521517973. p. 238-249 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Conference contribution › Research
  5. Published

    3D numerical simulation and PEPT experimental investigation of pressurized gas-solid fluidized bed hydrodynamic

    Andy Ingram, 1 Dec 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART C ed. p. 1833-1842 10 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Published

    An investigation into the feasibility of radioactive gas imaging for studies in process tomography

    Andy Ingram, Thomas Leadbeater & David Parker, 1 Jan 2014, 7th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 897-906 10 p. (7th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    Analysis of operating conditions of a continuous powder mixer using pept

    Andy Ingram, Jonathan Seville, 1 Dec 2008, AIChE100 - 2008 AIChE Annual Meeting, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

    Andy Ingram & Gary Leeke, 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    Developments in PEPT for process applications

    David Parker, Xianfeng Fan & Andy Ingram, 1 Jan 2005, 4th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 825-830 6 p. (4th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Published

    Developments in PET and PEPT at Birmingham

    David Parker, Xianfeng Fan, Marc Hausard, Andy Ingram, Thomas Leadbeater, 1 Jan 2007, 5th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 290-296 7 p. (5th World Congress in Industrial Process Tomography).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent

    Andy Ingram & Gary Leeke, 26 Aug 2017, ICCM21. International Committee on Composite Materials (ICCM), Vol. 21. 9 p. 4054

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Paper › Research › Not peer-reviewed
  13. Published

    Comparison of PEPT measurements and discrete particle simulations in a rectangular 3D spout fluid bed

    Xianfeng Fan, Joe Wood, Andy Ingram, David Parker, 1 Jan 2005, p. 551. 1 p.

    Research output: Contribution to conference (unpublished)Paper

Previous 1 2 3 4 5 6 7 8 Next