Engineering

Organisational unit: School

1 - 20 out of 9,750Page size: 20

Publications

  1. 2021
  2. Published

    Aluminium SHS and RHS subjected to biaxial bending: experimental testing, modelling and design recommendations

    Marios Theofanous, Samir Dirar, 15 Jan 2021, In: Engineering Structures. 227, 12 p., 111468.

    Research output: Contribution to journal › Article › peer-review

  3. Published

    Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener

    Konstantinos Skalomenos, 15 Jan 2021, In: Engineering Structures. 227, 111443.

    Research output: Contribution to journal › Article › peer-review

  4. Published

    Realisation of a novel functionally redundant actuation system for a railway track-switch

    Saikat Dutta & Roger Dixon, 13 Jan 2021, In: Applied Sciences (Switzerland). 11, 2, 20 p., 702.

    Research output: Contribution to journal › Article › peer-review

  5. Published

    More Efficient AC Filterless Flexible LCC HVDC by Analyzing the Impact of Single-Phase Fault on Commutations

    Conghuan Yang, Ying Xue & Xiao-Ping Zhang, 1 Jan 2021, In: IEEE Access. 9, p. 7643-7654

    Research output: Contribution to journal › Article › peer-review

  6. Published

    Slenderness-based design for sigma sections subjected to interior one flange loading

    Marios Theofanous & Samir Dirar, Jan 2021, In: Thin-Walled Structures. 158, 13 p., 107194.

    Research output: Contribution to journal › Article › peer-review

  7. 2020
  8. Accepted/In press

    Investigation of the aerodynamic phenomena associated with a long lorry platoon running through a tunnel

    Francis Robertson, David Soper, Hassan Hemida, 31 Dec 2020, (Accepted/In press) In: Journal of Wind Engineering and Industrial Aerodynamics.

    Research output: Contribution to journal › Article › peer-review

  9. Accepted/In press

    4D Printing of Origami Structures for Minimally Invasive Surgeries of Functional Scaffold

    Khamis Essa & Hany Hassanin, 28 Dec 2020, (Accepted/In press) In: Applied Sciences.

    Research output: Contribution to journal › Article › peer-review

  10. E-pub ahead of print

    Unsteady aerodynamic forces on long lorry platoons

    Francis Robertson, David Soper & Christopher Baker, Feb 2021, In: Journal of Wind Engineering and Industrial Aerodynamics. 209, 11 p., 104481.

    Research output: Contribution to journal › Article › peer-review

  11. Accepted/In press

    A sequential model-based approach for gas turbine performance diagnostics

    Elias Tsoutsanis, 17 Dec 2020, (Accepted/In press) In: Energy.

    Research output: Contribution to journal › Article › peer-review

  12. Published

    Proglacial groundwater storage dynamics under climate change and glacier retreat

    Nicholas Barrand, David Hannah, Stefan Krause, 17 Dec 2020, In: Hydrological Processes. 34, 26, p. 5456-5473 18 p.

    Research output: Contribution to journal › Article › peer-review

  13. Published

    Rapid prototyping method for 3D PDMS microfluidic devices using a red femtosecond laser

    Mozafar Saadat, Arran Hughes & Amir Hajiyavand, 17 Dec 2020, In: Advances in Mechanical Engineering. 12, 12, p. 1-12

    Research output: Contribution to journal › Article › peer-review

  14. Published

    Modular off-chip emulsion generator enabled by a revolving needle

    Shiyang Tang, 15 Dec 2020, In: Lab on a Chip. 20, 24, p. 4592-4599 8 p.

    Research output: Contribution to journal › Article › peer-review

  15. Accepted/In press

    Numerical and experimental investigations of interdigital transducer configurations for efficient droplet streaming and jetting induced by surface acoustic waves

    Mehdi Jangi, 14 Dec 2020, (Accepted/In press) In: International Journal of Multiphase Flow.

    Research output: Contribution to journal › Article › peer-review

  16. Accepted/In press

    Bearing capacity of tall monopile towers under environments loading

    Yu Hu, Jian Yang & Charalampos Baniotopoulos, 10 Dec 2020, (Accepted/In press) Proceedings VSOE21.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Accepted/In press

    Testing the viability of measuring intraocular pressure using soundwaves from a smartphone

    Khamis Essa & Haider Butt, 10 Dec 2020, (Accepted/In press) In: Engineering Reports.

    Research output: Contribution to journal › Article › peer-review

  18. Accepted/In press

    Effects of the internal structures of monolith ceramic substrates on thermal and hydraulic properties: Additive manufacturing, numerical modelling and experimental testing

    Nikolina Kovacev, Sheng Li, Soheil Zeraati Rezaei, Hassan Hemida, Athanasios Tsolakis & Khamis Essa, 9 Dec 2020, (Accepted/In press) In: The International Journal of Advanced Manufacturing Technology.

    Research output: Contribution to journal › Article › peer-review

  19. Published

    Tall offshore steel wind turbine towers under wind, current and wave loading: An experimental and numerical study

    Yu Hu, Jian Yang, Charalampos Baniotopoulos, 9 Dec 2020, EASD . Procedia, p. 2123-2133 11 p. (EASD).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Accepted/In press

    Measurements of the static pressure near the surface in the atmospheric boundary layer

    Andrew Quinn, Adam Robertson, 8 Dec 2020, (Accepted/In press) In: Journal of Wind Engineering and Industrial Aerodynamics.

    Research output: Contribution to journal › Article › peer-review

  21. Published

    Assessing the Economic Risk of Building Damage Due to the Tunneling-Induced Settlement Using Monte Carlo Simulations and BIM

    Chris Rogers & David Chapman, 1 Dec 2020, In: Sustainability. 12, 23, 19 p., 10034.

    Research output: Contribution to journal › Article › peer-review

  22. Published

    Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures: a large-eddy simulation

    Mehdi Jangi, 1 Dec 2020, In: Applied Energy. 279, 9 p., 115774.

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 3 4 5 6 7 8 ...488 Next