Powder Technology, 0032-5910

Journal

Publications

  1. 2020
  2. Published
  3. Published
  4. Published

    Effect of distributor design on particle distribution in a binary fluidised bed

    Christopher Windows-Yule, Douglas Werner, 1 May 2020, In: Powder Technology. 367, p. 1-9 9 p.

    Research output: Contribution to journalArticlepeer-review

  5. Published
  6. 2019
  7. Published

    The build-up of detergent agglomerates in an auger filler

    Christopher Hewitt, Richard Greenwood & Andy Ingram, 15 Feb 2019, In: Powder Technology. 344, p. 628-635 8 p.

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Detecting stability of conical spouted beds based on information entropy theory

    Chiya Savari, 1 Feb 2019, In: Powder Technology. 343, p. 185-193 9 p.

    Research output: Contribution to journalArticlepeer-review

  9. 2018
  10. Published
  11. Published
  12. E-pub ahead of print

    A fast multipole boundary element method implemented for wet single particle and wall interactions

    Mike Adams & James Andrews, 21 Mar 2018, (E-pub ahead of print) In: Powder Technology. 7 p.

    Research output: Contribution to journalArticlepeer-review

  13. Published

    Modelling of pastes as viscous soils – Lubricated squeeze flow

    Stuart Blackburn, 1 Jan 2018, In: Powder Technology. 323, p. 250-268 19 p.

    Research output: Contribution to journalArticlepeer-review

  14. 2017
  15. Published

    Study of the particle motion induced by a vortex shaker

    David Parker, 1 Dec 2017, In: Powder Technology. 322, p. 54-64

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Monitoring of liquid sprayed conical spouted beds by recurrence plots

    Chiya Savari, 1 Jul 2017, In: Powder Technology. 316, p. 148-156 9 p.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Simulation study of anomalous thermal properties of molten nitrate salt

    Alessio Alexiadis & Yulong Ding, 1 Jun 2017, In: Powder Technology. 314, p. 660-664

    Research output: Contribution to journalArticlepeer-review

  18. Published
  19. 2016
  20. Published

    Discrete element modelling of agglomerate impact using autoadhesive elastic-plastic particles

    Colin Thornton, 1 Sep 2016, In: Powder Technology. 297, p. 81-88

    Research output: Contribution to journalArticlepeer-review

  21. E-pub ahead of print

    DEM-CFD analysis of contact electrification and electrostatic interactions during fluidization

    Chuan-yu Wu & Mike Adams, 12 Aug 2016, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  22. E-pub ahead of print

    Agglomeration in counter-current spray drying towers. Part B: Interaction between multiple spraying levels

    Mark Simmons, 11 May 2016, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  23. E-pub ahead of print

    Agglomeration in counter-current spray drying towers. Part A: Particle growth and the effect of nozzle height

    Mark Simmons, 10 May 2016, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  24. 2015
  25. Published
  26. Published

    Numerical analysis of contact electrification of non-spherical particles in a rotating drum

    Chuan-yu Wu & Mike Adams, Nov 2015, In: Powder Technology. 285, p. 110-122 13 p.

    Research output: Contribution to journalArticlepeer-review

  27. Published

    The importance of processing conditions on the biological response to apatites

    Sophie Cox, Parastoo Jamshidi, Richard Williams, Liam Grover, Nov 2015, In: Powder Technology. 284, p. 195-203

    Research output: Contribution to journalArticlepeer-review

  28. Published

    Uniformly dispersion of carbon nanotube in aluminum powders by wet shake-mixing approach

    Isaac Chang, Nov 2015, In: Powder Technology. 284, p. 32-39

    Research output: Contribution to journalArticlepeer-review

  29. E-pub ahead of print
  30. Published

    Method for the prediction of the particle attachment to the bubble in oil at elevated temperatures

    Emily Nowak & Andrzej Pacek, Apr 2015, In: Powder Technology. 274, p. 105-111

    Research output: Contribution to journalArticlepeer-review

  31. E-pub ahead of print

    Twin Screw Granulation – A Literature Review

    Neil Rowson, Andy Ingram, 7 Feb 2015, (E-pub ahead of print) In: Powder Technology.

    Research output: Contribution to journalArticlepeer-review

  32. Published

    A DEM investigation of transitional behaviour in gas-fluidised beds

    Colin Thornton & Jonathan Seville, Jan 2015, In: Powder Technology. 270, p. 128-134

    Research output: Contribution to journalArticlepeer-review

  33. 2014
  34. Published

    Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder

    Isaac Chang, 1 Nov 2014, In: Powder Technology. 266, p. 7-15

    Research output: Contribution to journalArticlepeer-review

  35. Published
  36. Published

    Coupled DEM-LBM simulation of internal fluidisation induced by a leaking pipe

    David Chapman, Mar 2014, In: Powder Technology. 254, p. 299-306

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Influence of pH on the formulation of TiO2 nano-crystalline powders with high photocatalytic activity

    Neil Rowson, Feb 2014, In: Powder Technology. 253, p. 22-28 7 p.

    Research output: Contribution to journalArticlepeer-review

  38. 2013
  39. Published
  40. Published
  41. Published

    A comparison of contact angle measurement techniques applied to highly porous catalyst supports

    Emily Nowak & Andrzej Pacek, Jan 2013, In: Powder Technology. 233, p. 52-64 13 p.

    Research output: Contribution to journalArticlepeer-review

  42. 2012
  43. Published

    Size and strength distributions of melamine-formaldehyde microcapsules prepared by membrane emulsification

    Jon Preece & Zhibing Zhang, Sep 2012, In: Powder Technology. 227, p. 43-50 8 p.

    Research output: Contribution to journalArticlepeer-review

  44. Published
  45. Published

    A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions

    Andy Ingram, 1 Feb 2012, In: Powder Technology. 217, p. 540-547 8 p.

    Research output: Contribution to journalArticlepeer-review

  46. 2011
  47. Published
  48. Published

    An investigation of the comparative behaviour of alternative contact force models during elastic collisions

    Colin Thornton, 1 Jul 2011, In: Powder Technology. 210, 3, p. 189-197 9 p.

    Research output: Contribution to journalArticle

  49. Published

    Parallelization of a Lagrangian-Eulerian DEM/CFD code for application to fluidized beds

    Colin Thornton, 1 Feb 2011, In: Powder Technology. 207, 1-3, p. 270-278 9 p.

    Research output: Contribution to journalArticle

  50. Published

    3D DEM/CFD analysis of size-induced segregation during die filling

    Yu Guo, Chuan-yu Wu & Colin Thornton, 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 177-188 12 p.

    Research output: Contribution to journalArticle

  51. Published
  52. Published

    Effect of batch size on mechanical properties of granules in high shear granulation

    Mike Adams, 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 44-52 9 p.

    Research output: Contribution to journalArticle

  53. Published

    Impact of solid sizes on flow structure and particle motions in bubbling fluidization

    David Parker, 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 132-138 7 p.

    Research output: Contribution to journalArticle

  54. Published
  55. 2010
  56. Published

    Particle velocities and their residence time distribution in the riser of a CFB

    David Parker, 1 Nov 2010, In: Powder Technology. 203, 2, p. 187-197 11 p.

    Research output: Contribution to journalArticle

  57. Published

    Predicting particle segregation in cross-flow gas filtration

    Richard Greenwood, 1 Nov 2010, In: Powder Technology. 203, 3, p. 419-427 9 p.

    Research output: Contribution to journalArticle

  58. Published

    Spray drying of TiO2 nanoparticles into redispersible granules

    Nicholas Adkins, 1 Nov 2010, In: Powder Technology. 203, 2, p. 384-388 5 p.

    Research output: Contribution to journalArticle

  59. Published

    Impact breakage of spherical, cuboidal and cylindrical agglomerates

    Colin Thornton, 1 Apr 2010, In: Powder Technology. 199, 2, p. 189-196 8 p.

    Research output: Contribution to journalArticle

  60. Published

    Numerical analysis of density-induced segregation during die filling

    Chuan-yu Wu & Colin Thornton, 1 Jan 2010, In: Powder Technology. 197, 1-2, p. 111-119 9 p.

    Research output: Contribution to journalArticle

  61. 2009
  62. Published

    De-agglomeration of hydrophobic and hydrophilic silica nano-powders in a high shear mixer

    Ping Ding & Andrzej Pacek, 1 Nov 2009, In: Powder Technology. 195, 3, p. 221-226 6 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 Next