Materials Science and Engineering A, 0921-5093

Journal

51 - 93 out of 93Page size: 50

Publications

  1. 2011
  2. Published

    The behavior of fatigue crack initiation and propagation in AA2524-T34 alloy

    Biao Cai, 2011, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  3. Published

    Formability and failure mechanisms of AA2024 under hot forming conditions

    Martin Strangwood & Trevor Dean, 1 Mar 2011, In: Materials Science and Engineering A. 528, 6, p. 2648-2656 9 p.

    Research output: Contribution to journal › Article

  4. Published

    The bonding of nickel foam to Ti-6Al-4V using Ti-Cu-Ni braze alloy

    Tom Jarvis, 1 Mar 2011, In: Materials Science and Engineering A. 528, 6, p. 2592-2601 10 p.

    Research output: Contribution to journal › Article

  5. Published

    Porosity, hydrogen and bifilm content in Al alloy castings

    John Campbell, 1 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3860-3865 6 p.

    Research output: Contribution to journal › Article

  6. Published

    The mechanical behaviour of an ultrafine grained Ti-47Al-2Cr (at%) alloy in tension and compression and at different temperatures

    25 May 2011, In: Materials Science and Engineering A. 528, 13-14, p. 4592-4599 8 p.

    Research output: Contribution to journal › Article › peer-review

  7. Published

    Microstructure and properties of diffusion bonded Ti-6Al-4V parts using brazing-assisted hot isostatic pressing

    Junfa Mei, 1 Sep 2011, In: Materials Science and Engineering A. 528, 24, p. 7388-7394 7 p.

    Research output: Contribution to journal › Article

  8. 2012
  9. Published

    Effect of lamellar spacing on fatigue crack growth behaviour of a TiAl-based aluminide with lamellar microstructure

    Paul Bowen, 15 Jan 2012, In: Materials Science and Engineering A. 532, p. 13-20 8 p.

    Research output: Contribution to journal › Article › peer-review

  10. Published

    Microstructures and tensile properties of hot isostatic pressed Ti4522XD powders

    Dawei Hu, 1 Feb 2012, In: Materials Science and Engineering A. 534, p. 268-276 9 p.

    Research output: Contribution to journal › Article

  11. 2013
  12. Published

    Nanoscale precipitation in aged Al-3.5Cu-0.4Mg-0.2Ge alloy

    Wei Liu, Biao Cai & Shaohua Zhong, 2013, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  13. Published

    Microstructure and microhardness of Ti6246 linear friction weld

    Yu-Lung Chiu, Hangyue Li & Paul Bowen, 1 Feb 2013, In: Materials Science and Engineering A. 562, p. 17-24 8 p.

    Research output: Contribution to journal › Article › peer-review

  14. Published

    Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder

    Chunlei Qiu, Moataz Attallah, Xinhua Wu, 1 Mar 2013, In: Materials Science and Engineering A. 564, p. 176-185 10 p.

    Research output: Contribution to journal › Article › peer-review

  15. Published

    Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V

    Chunlei Qiu, Nicholas Adkins & Moataz Attallah, 20 Aug 2013, In: Materials Science and Engineering A. 578, p. 230-239 10 p.

    Research output: Contribution to journal › Article › peer-review

  16. 2014
  17. Published

    Micro-tensile strength of a welded turbine disc superalloy

    Christopher Cooper, Yu-Lung Chiu, Ian Jones, Hangyue Li, 24 Feb 2014, In: Materials Science and Engineering A. 596, p. 229-235

    Research output: Contribution to journal › Article › peer-review

  18. Published

    Acoustic emission study of fatigue crack propagation in extruded AZ31 magnesium alloy

    Mayorkinos Papaelias & Claire Davis, 12 Mar 2014, In: Materials Science and Engineering A. 597, p. 270–278

    Research output: Contribution to journal › Article › peer-review

  19. Published

    On the thermo-mechanical stability and oxidation behavior of carbon S-phase at elevated temperature and under tensile stress

    Hanshan Dong, 1 Apr 2014, In: Materials Science and Engineering A. 600, p. 90-98

    Research output: Contribution to journal › Article › peer-review

  20. Published

    Abnormal microstructure in the weld zone of linear friction welded Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy joint and its influence on joint properties

    KeeHyun Park, 2 Apr 2014, In: Materials Science and Engineering A. 599, p. 38-45 8 p.

    Research output: Contribution to journal › Article › peer-review

  21. Published

    On the role of thermal exposure on the stress controlled fatigue behaviour of a high strength titanium–aluminum alloy

    Zewen Huang, 6 Oct 2014, In: Materials Science and Engineering A. 615, p. 29-41 13 p.

    Research output: Contribution to journal › Article › peer-review

  22. Published

    Can slow-diffusing solute atoms reduce vacancy diffusion in advanced high-temperature alloys?

    Kamal Nayan Goswami & Alessandro Mottura, 1 Nov 2014, In: Materials Science and Engineering A. 617, p. 194-199 6 p.

    Research output: Contribution to journal › Article › peer-review

  23. 2015
  24. Published

    A study of direct forging process for powder superalloys

    Trevor Dean, 5 Jan 2015, In: Materials Science and Engineering A. 621, p. 68-75 8 p.

    Research output: Contribution to journal › Article › peer-review

  25. Published

    Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

    Chunlei Qiu, Nicholas Adkins, Mark Ward, Hany Hassanin & Moataz Attallah, 25 Mar 2015, In: Materials Science and Engineering A. 628, p. 188-197

    Research output: Contribution to journal › Article › peer-review

  26. E-pub ahead of print

    On the role of thermal exposure on the stress controlled fatigue behavior Of an intermediate strength γ−TiAl based alloy

    Zewen Huang, 31 Mar 2015, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  27. Published

    Corrigendum to "Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting" [Mater. Sci. Eng. A628,(2015), 188-197], doi: 10.1016/j.msea.2015.01.031

    Chunlei Qiu, Nicholas Adkins, Mark Ward, Hany Hassanin & Moataz Attallah, 5 Jun 2015, In: Materials Science and Engineering A. 638, p. 228-231 4 p.

    Research output: Contribution to journal › Article › peer-review

  28. E-pub ahead of print

    Ordering and the micromechanics of Ti-7Al

    Ian Jones, 21 Sep 2015, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  29. 2016
  30. Published

    Microstructure and mechanical behaviour of a Mg94Zn2Y4 alloy processed by equal channel angular pressing

    Yu-Lung Chiu, 1 Jul 2016, In: Materials Science and Engineering A. 669, p. 417-427

    Research output: Contribution to journal › Article › peer-review

  31. Published

    Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites

    David Collins, 30 Aug 2016, In: Materials Science and Engineering A. 672, p. 175-183 9 p.

    Research output: Contribution to journal › Article › peer-review

  32. Published

    Creep deformation mechanisms in a γ titanium aluminide

    Rengen Ding, 15 Sep 2016, In: Materials Science and Engineering A. 673, p. 616-623

    Research output: Contribution to journal › Article › peer-review

  33. 2017
  34. Published

    Coarsening process and precipitation hardening in Fe2AlV-strengthened ferritic Fe76Al12V12 alloy

    P.A. Ferreirós, 2017, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  35. Published

    Impact toughness transition temperature of ferritic Fe-Al-V alloy with strengthening Fe2AlV precipitates

    P.A. Ferreirós, 2017, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  36. Published

    Visco-plasticity during In-situ Cooling from Solidification of a Nickel-Base Single Crystal Superalloy using Neutron Diffraction

    Chinnapat Panwisawas, 10 Jan 2017, In: Materials Science and Engineering A. 681, p. 32-40 9 p.

    Research output: Contribution to journal › Article › peer-review

  37. Published

    High temperature nanoscratching of single crystal silicon under reduced oxygen condition

    Santiago Corujeira Gallo, Hanshan Dong, 27 Jan 2017, In: Materials Science and Engineering A. 684, p. 385-393

    Research output: Contribution to journal › Article › peer-review

  38. Published

    Spark plasma sintering of graphene platelet reinforced zirconia composites with improved mechanical performance

    Kyle Jiang, 14 Mar 2017, In: Materials Science and Engineering A. 688, p. 70-75 6 p.

    Research output: Contribution to journal › Article › peer-review

  39. 2018
  40. Published

    Effect of yttria inclusion on room temperature tensile properties of investment cast TiAl

    Paul Withey, 17 Jan 2018, In: Materials Science and Engineering A. 712, p. 73-79

    Research output: Contribution to journal › Article › peer-review

  41. Published

    Anisotropy of <a > slip behaviour in single-colony lamellar structures of Ti–6Al–4V

    Rengen Ding, Paul Bowen, 7 Feb 2018, In: Materials Science and Engineering A. 715, p. 315-319

    Research output: Contribution to journal › Article › peer-review

  42. Published

    Influence of the kissing bond on the mechanical properties and fracture behaviour of AA5083-H112 friction stir welds

    Ji Zou & Moataz Attallah, 14 Mar 2018, In: Materials Science and Engineering A. 719, p. 12-20 9 p.

    Research output: Contribution to journal › Article › peer-review

  43. E-pub ahead of print

    A Study on Tensile Properties of Alloy 709, at various temperatures

    Hangyue Li, Paul Bowen, 23 Jun 2018, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  44. E-pub ahead of print

    A kinetic Monte Carlo study of vacancy diffusion in non-dilute Ni-Re alloys

    Kamal Nayan Goswami & Alessandro Mottura, 16 Nov 2018, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  45. Published

    Characterisation of precipitation and carbide coarsening in low carbon low alloy Q&T steels during the early stages of tempering

    Martin Strangwood & Claire Davis, 19 Dec 2018, In: Materials Science and Engineering A. 738, p. 174-189 16 p.

    Research output: Contribution to journal › Article › peer-review

  46. 2019
  47. Published

    The effect of hot form quench (HFQ®) conditions on precipitation and mechanical properties of aluminium alloys

    Yangchun Dong, Hanshan Dong & Trevor Dean, 12 Jun 2019, In: Materials Science and Engineering A. 761, 138017.

    Research output: Contribution to journal › Article › peer-review

  48. Published

    Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances

    Kyle Jiang, 22 Jul 2019, In: Materials Science and Engineering A. 761, 138018.

    Research output: Contribution to journal › Article › peer-review

  49. Published

    Influence of processing parameters on internal porosity and types of defects formed in Ti6Al4V lattice structure fabricated by selective laser melting

    Luke Carter, Moataz Attallah, 8 Nov 2019, In: Materials Science and Engineering A. 767, 138387.

    Research output: Contribution to journal › Article › peer-review

  50. 2020
  51. Published

    Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings

    David Collins, 31 Jan 2020, In: Materials Science and Engineering A. 773, 13 p., 138862.

    Research output: Contribution to journal › Article › peer-review

  52. Published

    Mechanical property evaluation of second phase particles in a Mg–8Al-0.5Zn alloy using micropillar compression

    Ubaid-ur-Rehman Ghori, Yu-Lung Chiu, Ian Jones, 21 Feb 2020, In: Materials Science and Engineering A. 775, 138973.

    Research output: Contribution to journal › Article › peer-review

  53. Published

    Characterization of plastic deformation induced by machining in a Ni-based superalloy

    Hangyue Li & Paul Bowen, 19 Mar 2020, In: Materials Science and Engineering A. 778, p. 1-13 13 p., 139104.

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 Next