Materials Science and Engineering A, 0921-5093

Journal

1 - 50 out of 91Page size: 50

Publications

  1. 2000
  2. Published

    Oxygen boost diffusion for the deep-case hardening of titanium alloys

    Hanshan Dong & Xiaoying Li, 31 Mar 2000, In: Materials Science and Engineering A. 280, 2, p. 303-310 8 p.

    Research output: Contribution to journal › Article › peer-review

  3. 2001
  4. Published

    Microstructures and properties of investment castings of gamma titanium aluminide

    Richard Harding, Jian Kuang & John Campbell, 1 Jan 2001, In: Materials Science and Engineering A. 329-331c, p. 31-37 7 p.

    Research output: Contribution to journal › Article

  5. Published

    Amorphization and microstructural evolution in multicomponent (FeCoNi) 70Zr10B20 alloy systems by mechanical alloying process

    Isaac Chang & Paul Bowen, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 389-393 5 p.

    Research output: Contribution to journal › Article

  6. Published

    Big cube phase formation in Zr-based metallic glasses

    Isaac Chang, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 305-31 27 p.

    Research output: Contribution to journal › Article

  7. Published

    Thermodynamic and magnetic properties of multicomponent (Fe,Ni)70Zr10B20 amorphous alloy powders made by mechanical alloying

    Isaac Chang, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 992-996 5 p.

    Research output: Contribution to journal › Article

  8. Published

    A physically-based model for the prediction of long fatigue crack growth in Ti-6Al-4V

    John Knott, 1 Sep 2001, In: Materials Science and Engineering A. 315, 1-2, p. 1-10 10 p.

    Research output: Contribution to journal › Article

  9. 2002
  10. Published

    Effects of oxide phases on thermomagnetisation of mechanically alloyed amorphous Fe-(Co, Ni)-Zr-B powder

    Isaac Chang, 1 Jan 2002, In: Materials Science and Engineering A. 375-377, p. 1092-1096 5 p.

    Research output: Contribution to journal › Article

  11. Published

    Effects of runner systems design on the mechanical strength of Al-Si-Mg castings

    John Campbell, 1 Jan 2002, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article

  12. Published

    Mechanical properties of Ti-V-N and V-N microalloyed ferritic-pearlitic forging steels

    Maria Balart, Claire Davis & Martin Strangwood, 1 Jan 2002, In: Materials Science and Engineering A. 328, 1-2, p. 48-57 10 p.

    Research output: Contribution to journal › Article

  13. Published

    Compsitional dependance of crystallisation behaviour of mechanically alloyed amorphous Fe-Ni-Zr-B alloys

    Isaac Chang, 28 Feb 2002, In: Materials Science and Engineering A. 325, p. 25-30 6 p.

    Research output: Contribution to journal › Article

  14. Published

    Characterisation of the palladium-modified thermal oxidation-treated titanium

    Xiaoying Li, Hanshan Dong & Tom Bell, 31 Mar 2002, In: Materials Science and Engineering A. 326, 2, p. 330-342 13 p.

    Research output: Contribution to journal › Article

  15. Published

    Controlling the properties of some ordered Ti-based alloys

    Michael Loretto, David Horspool, Richard Botten, Dawei Hu, Yue Li, Dinesh Srivastava & Xinhua Wu, 1 Jun 2002, In: Materials Science and Engineering A. A329-331, p. 1-6 6 p.

    Research output: Contribution to journal › Article

  16. Published

    Inverse creep of intermetallics

    Raymond Smallman, Tiesheng Rong & Ian Jones, 1 Jun 2002, In: Materials Science and Engineering A. 329-331, p. 825-855 31 p.

    Research output: Contribution to journal › Article

  17. Published

    Thermal stability of Ti–46Al–5Nb–1W alloy

    Zewen Huang & Paul Bowen, 1 Jun 2002, In: Materials Science and Engineering A. 329-331, 31, p. 435-445 11 p.

    Research output: Contribution to journal › Article

  18. 2003
  19. Published

    An Investigation into the Cause of Inhomogeneous Distributions of Aluminium Nitrides in Silicon Steels

    Claire Davis, 25 Mar 2003, In: Materials Science and Engineering A. 345, 1-2, p. 23-27 5 p.

    Research output: Contribution to journal › Article › peer-review

  20. Published

    Hot-stage nano-characterisations of an iron aluminides

    Chen Li & Hanshan Dong, 15 Aug 2003, In: Materials Science and Engineering A. A354, 1-2, p. 112-120 9 p.

    Research output: Contribution to journal › Article

  21. Published

    Fatigue crack growth behavior of off-axis Ti-6Al-4V/SCS-6 metal matrix composites

    Paul Bowen, 15 Sep 2003, In: Materials Science and Engineering A. 356, p. 54-68 15 p.

    Research output: Contribution to journal › Article

  22. Published

    On macrohardness testing of Al-7 wt.% Si-Mg alloys - I. Geometrical and mechanical aspects

    John Campbell, 1 Nov 2003, In: Materials Science and Engineering A. 361, 1-2, p. 232-239 8 p.

    Research output: Contribution to journal › Article

  23. 2004
  24. Published

    A method of heat-treatment of near gamma-TiAl to enhance oxidation resistance by the formation of a Ti₅Si₃ layer

    Simon Gray, Mike Jacobs, Clive Ponton & Hugh Evans, 1 Jan 2004, In: Materials Science and Engineering A. 384, 1-2, p. 77-82 6 p.

    Research output: Contribution to journal › Article

  25. Published

    Observation of tension/compression asymmetry in an Nb-Al-V alloy

    Huisheng Jiao, Tiesheng Rong, Ian Jones, 1 Jan 2004, In: Materials Science and Engineering A. 387-389, p. 476-480 5 p.

    Research output: Contribution to journal › Article

  26. Published

    Evaluating structural integrity of cast Al-7%Si-Mg alloys via work hardening characteristics I. Concept of target properties

    John Campbell, 15 Mar 2004, In: Materials Science and Engineering A. A368, p. 205-211 7 p.

    Research output: Contribution to journal › Article

  27. Published

    Evaluating structural integrity of cast Al-7%Si-Mg alloys via work hardening characteristics II. A new quality index

    John Campbell, 15 Mar 2004, In: Materials Science and Engineering A. A368, p. 231-238 8 p.

    Research output: Contribution to journal › Article

  28. Published

    Microstructural development in equiatomic multicomponent alloys

    Isaac Chang, 15 Jul 2004, In: Materials Science and Engineering A. A375-377, p. 213-218 6 p.

    Research output: Contribution to journal › Article

  29. Published

    Simple processing and characterisation of nanosized metal powders

    Isaac Chang, 15 Jul 2004, In: Materials Science and Engineering A. A375-377, p. 66-71 6 p.

    Research output: Contribution to journal › Article

  30. Published

    Effect of duplex ferrite grain size distribution on local fracture stresses of Nb-microalloyed steels

    Su Wu & Claire Davis, 15 Dec 2004, In: Materials Science and Engineering A. 387-389, p. 456-460 5 p.

    Research output: Contribution to journal › Article

  31. 2005
  32. Published

    Friction stir welding parameters: A tool for controlling abnormal grain growth during subsequent heat treatment

    Moataz Attallah, 25 Jan 2005, In: Materials Science and Engineering A. 391, 1-2, p. 51-59 9 p.

    Research output: Contribution to journal › Article › peer-review

  33. Published

    Tensile cracking of a chromia layer on a stainless steel during thermal cycling with hold periods

    Karima Berriche-Bouhanek & Hugh Evans, 5 Dec 2005, In: Materials Science and Engineering A. 412, 1-2, p. 182 - 190 9 p.

    Research output: Contribution to journal › Article

  34. Published

    Investigation of eutectic island formation in SX superalloys

    Nils Warnken, 15 Dec 2005, In: Materials Science and Engineering A. 413-414, p. 267-271 5 p.

    Research output: Contribution to journal › Article › peer-review

  35. Published

    Investigation of the initial transient in directional solidification of binary AlCu alloys

    Nils Warnken, 15 Dec 2005, In: Materials Science and Engineering A. p. 259 4 p.

    Research output: Contribution to journal › Article › peer-review

  36. 2006
  37. Published

    Improving the erosion-corrosion resistance of AlSl316 austenitic stainless steel by low-temperature plasma surface alloying with N and C

    Hanshan Dong, 15 Sep 2006, In: Materials Science and Engineering A. A431, p. 137-145 9 p.

    Research output: Contribution to journal › Article

  38. 2007
  39. Published

    Laser fabrication of Ti6Al4V/TiC composites using simultaneous powder and wire feed

    Fude Wang, Junfa Mei, Hui Jiang & Xinhua Wu, 1 Jan 2007, In: Materials Science and Engineering A. 445, p. 461-466 6 p.

    Research output: Contribution to journal › Article

  40. Published

    Uphill diffusion in ternary Ni-Re-Ru alloys at 1000 and 1100 degrees C

    Roger Reed, 1 Jan 2007, In: Materials Science and Engineering A. 460, p. 587-594 8 p.

    Research output: Contribution to journal › Article

  41. Published

    Development of rapidly solidified Al–Y–Ni-based alloys

    Isaac Chang, 25 Mar 2007, In: Materials Science and Engineering A. 449-451, p. 1009-1012 4 p.

    Research output: Contribution to journal › Article

  42. Published

    Effect of Mo and Hf on the mechanical properties and microstructure of Nb-Ti-C alloys

    Rengen Ding, Ian Jones, 15 Jun 2007, In: Materials Science and Engineering A. 458, 1-2, p. 126-135 10 p.

    Research output: Contribution to journal › Article

  43. Published

    Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds Part 1. Quantification of local fracture behaviour observed in notched testpieces

    Paul Bowen, 1 Jul 2007, In: Materials Science and Engineering A. 460, p. 436-452 17 p.

    Research output: Contribution to journal › Article

  44. 2008
  45. Published

    Microstructures and mechanical properties of Nb-Ti-C alloys

    Ian Jones, 1 Jan 2008, In: Materials Science and Engineering A. 485, 1-2, p. 359-366 8 p.

    Research output: Contribution to journal › Article

  46. Published

    Effect of increased interfacial strength on the fatigue crack growth resistance and crack opening displacement of β Ti21S/SCS 6 composites

    Paul Bowen, 15 Mar 2008, In: Materials Science and Engineering A. 476, 1-2, p. 301-307 7 p.

    Research output: Contribution to journal › Article

  47. Published

    Effect of carbon additions on hot tearing of a second generation nickel-base superalloy

    Yizhou Zhou, 1 Apr 2008, In: Materials Science and Engineering A. 479, 1-2, p. 324-332 9 p.

    Research output: Contribution to journal › Article

  48. Published

    Effect of Mo on mechanical properties and microstructure of Nb–Ti–C alloys

    Huisheng Jiao & Ian Jones, 15 Jun 2008, In: Materials Science and Engineering A. 483-484, p. 199-202 4 p.

    Research output: Contribution to journal › Article

  49. Published

    Effect of carbon on the microstructures and mechanical properties of as cast Nb-base alloy

    Rengen Ding, Ian Jones, 25 Jun 2008, In: Materials Science and Engineering A. 485, 1-2, p. 92-98 7 p.

    Research output: Contribution to journal › Article

  50. Published

    The effect of structural integrity on the tensile deformation characteristics of A206-T71 alloy castings

    John Campbell, 1 Jul 2008, In: Materials Science and Engineering A. 487, 1-2, p. 383-387 5 p.

    Research output: Contribution to journal › Article

  51. Published

    Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents

    Rengen Ding & Ian Jones, 15 Dec 2008, In: Materials Science and Engineering A. 497, 1-2, p. 301-308 8 p.

    Research output: Contribution to journal › Article

  52. 2009
  53. Published

    On the ductility potential of cast Al-Cu-Mg (206) alloys

    John Campbell, 1 Apr 2009, In: Materials Science and Engineering A. 506, 1-2, p. 23-26 4 p.

    Research output: Contribution to journal › Article

  54. Published

    Space and time effects of stress on cracking of glass

    Jian Yang, 1 Jun 2009, In: Materials Science and Engineering A. 512, 1-2, p. 45-52 8 p.

    Research output: Contribution to journal › Article

  55. Published

    Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456

    Brian Connolly & Alison Davenport, 1 Aug 2009, In: Materials Science and Engineering A. 519, 1-2, p. 1-8 8 p.

    Research output: Contribution to journal › Article

  56. Published

    The role of Hf and TiC additions in the mechanical properties and microstructure of NbAlV alloys

    Rengen Ding, Ian Jones, 1 Aug 2009, In: Materials Science and Engineering A. 516, 1-2, p. 65-72 8 p.

    Research output: Contribution to journal › Article

  57. 2010
  58. Published

    Effect of ECAP on microstructure and mechanical properties of ZE41 magnesium alloy

    Yu-Lung Chiu, 1 Jun 2010, In: Materials Science and Engineering A. 527, 16-17, p. 3777-3784 8 p.

    Research output: Contribution to journal › Article › peer-review

  59. Published

    Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature

    Rengen Ding, Ian Jones, 1 Aug 2010, In: Materials Science and Engineering A. 527, 21-22, p. 5734-5744 11 p.

    Research output: Contribution to journal › Article

  60. Published

    The influence of carbon on precipitation of alpha in Ti-5Al-5Mo-5V-3Cr

    Nicholas Wain, Xinjiang Hao & Xinhua Wu, 1 Nov 2010, In: Materials Science and Engineering A. 527, 29-30, p. 7673-7683 11 p.

    Research output: Contribution to journal › Article

  61. Published

    Thermodynamic and kinetic modeling of bcc phase in the Ti-Al-V ternary system

    Hang Wang, Nils Warnken & Roger Reed, 1 Dec 2010, In: Materials Science and Engineering A. 528, 2, p. 622-630 9 p.

    Research output: Contribution to journal › Article

Previous 1 2 Next