Materials Science and Engineering A, 0921-5093

Journal

1 - 50 out of 93Page size: 50

Publications

  1. Published

    Creep deformation mechanisms in a γ titanium aluminide

    Rengen Ding, 15 Sep 2016, In: Materials Science and Engineering A. 673, p. 616-623

    Research output: Contribution to journal › Article › peer-review

  2. Published

    Friction stir welding parameters: A tool for controlling abnormal grain growth during subsequent heat treatment

    Moataz Attallah, 25 Jan 2005, In: Materials Science and Engineering A. 391, 1-2, p. 51-59 9 p.

    Research output: Contribution to journal › Article › peer-review

  3. Published

    A study of direct forging process for powder superalloys

    Trevor Dean, 5 Jan 2015, In: Materials Science and Engineering A. 621, p. 68-75 8 p.

    Research output: Contribution to journal › Article › peer-review

  4. Published

    Mechanical properties of Ti-V-N and V-N microalloyed ferritic-pearlitic forging steels

    Maria Balart, Claire Davis & Martin Strangwood, 1 Jan 2002, In: Materials Science and Engineering A. 328, 1-2, p. 48-57 10 p.

    Research output: Contribution to journal › Article

  5. Published

    Space and time effects of stress on cracking of glass

    Jian Yang, 1 Jun 2009, In: Materials Science and Engineering A. 512, 1-2, p. 45-52 8 p.

    Research output: Contribution to journal › Article

  6. Published

    Big cube phase formation in Zr-based metallic glasses

    Isaac Chang, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 305-31 27 p.

    Research output: Contribution to journal › Article

  7. Published

    Microstructural development in equiatomic multicomponent alloys

    Isaac Chang, 15 Jul 2004, In: Materials Science and Engineering A. A375-377, p. 213-218 6 p.

    Research output: Contribution to journal › Article

  8. Published

    Simple processing and characterisation of nanosized metal powders

    Isaac Chang, 15 Jul 2004, In: Materials Science and Engineering A. A375-377, p. 66-71 6 p.

    Research output: Contribution to journal › Article

  9. Published

    High temperature nanoscratching of single crystal silicon under reduced oxygen condition

    Santiago Corujeira Gallo, Hanshan Dong, 27 Jan 2017, In: Materials Science and Engineering A. 684, p. 385-393

    Research output: Contribution to journal › Article › peer-review

  10. Published

    Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings

    David Collins, 31 Jan 2020, In: Materials Science and Engineering A. 773, 13 p., 138862.

    Research output: Contribution to journal › Article › peer-review

  11. Published

    Visco-plasticity during In-situ Cooling from Solidification of a Nickel-Base Single Crystal Superalloy using Neutron Diffraction

    Chinnapat Panwisawas, 10 Jan 2017, In: Materials Science and Engineering A. 681, p. 32-40 9 p.

    Research output: Contribution to journal › Article › peer-review

  12. Published

    Effects of runner systems design on the mechanical strength of Al-Si-Mg castings

    John Campbell, 1 Jan 2002, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article

  13. Published

    Effect of ECAP on microstructure and mechanical properties of ZE41 magnesium alloy

    Yu-Lung Chiu, 1 Jun 2010, In: Materials Science and Engineering A. 527, 16-17, p. 3777-3784 8 p.

    Research output: Contribution to journal › Article › peer-review

  14. Published

    Characterization of plastic deformation induced by machining in a Ni-based superalloy

    Hangyue Li & Paul Bowen, 19 Mar 2020, In: Materials Science and Engineering A. 778, p. 1-13 13 p., 139104.

    Research output: Contribution to journal › Article › peer-review

  15. Published

    The role of Hf and TiC additions in the mechanical properties and microstructure of NbAlV alloys

    Rengen Ding, Ian Jones, 1 Aug 2009, In: Materials Science and Engineering A. 516, 1-2, p. 65-72 8 p.

    Research output: Contribution to journal › Article

  16. Published

    Effect of Mo and Hf on the mechanical properties and microstructure of Nb-Ti-C alloys

    Rengen Ding, Ian Jones, 15 Jun 2007, In: Materials Science and Engineering A. 458, 1-2, p. 126-135 10 p.

    Research output: Contribution to journal › Article

  17. Published

    Effect of Mo on mechanical properties and microstructure of Nb–Ti–C alloys

    Huisheng Jiao & Ian Jones, 15 Jun 2008, In: Materials Science and Engineering A. 483-484, p. 199-202 4 p.

    Research output: Contribution to journal › Article

  18. Published

    Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents

    Rengen Ding & Ian Jones, 15 Dec 2008, In: Materials Science and Engineering A. 497, 1-2, p. 301-308 8 p.

    Research output: Contribution to journal › Article

  19. Published

    Effect of carbon on the microstructures and mechanical properties of as cast Nb-base alloy

    Rengen Ding, Ian Jones, 25 Jun 2008, In: Materials Science and Engineering A. 485, 1-2, p. 92-98 7 p.

    Research output: Contribution to journal › Article

  20. Published

    Porosity, hydrogen and bifilm content in Al alloy castings

    John Campbell, 1 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3860-3865 6 p.

    Research output: Contribution to journal › Article

  21. Published

    Oxygen boost diffusion for the deep-case hardening of titanium alloys

    Hanshan Dong & Xiaoying Li, 31 Mar 2000, In: Materials Science and Engineering A. 280, 2, p. 303-310 8 p.

    Research output: Contribution to journal › Article › peer-review

  22. Published

    Improving the erosion-corrosion resistance of AlSl316 austenitic stainless steel by low-temperature plasma surface alloying with N and C

    Hanshan Dong, 15 Sep 2006, In: Materials Science and Engineering A. A431, p. 137-145 9 p.

    Research output: Contribution to journal › Article

  23. Published

    Investigation of the initial transient in directional solidification of binary AlCu alloys

    Nils Warnken, 15 Dec 2005, In: Materials Science and Engineering A. p. 259 4 p.

    Research output: Contribution to journal › Article › peer-review

  24. Published

    Coarsening process and precipitation hardening in Fe2AlV-strengthened ferritic Fe76Al12V12 alloy

    P.A. Ferreirós, 2017, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  25. Published

    Impact toughness transition temperature of ferritic Fe-Al-V alloy with strengthening Fe2AlV precipitates

    P.A. Ferreirós, 2017, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  26. Published

    Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds Part 1. Quantification of local fracture behaviour observed in notched testpieces

    Paul Bowen, 1 Jul 2007, In: Materials Science and Engineering A. 460, p. 436-452 17 p.

    Research output: Contribution to journal › Article

  27. Published

    Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456

    Brian Connolly & Alison Davenport, 1 Aug 2009, In: Materials Science and Engineering A. 519, 1-2, p. 1-8 8 p.

    Research output: Contribution to journal › Article

  28. E-pub ahead of print

    A kinetic Monte Carlo study of vacancy diffusion in non-dilute Ni-Re alloys

    Kamal Nayan Goswami & Alessandro Mottura, 16 Nov 2018, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  29. Published

    Can slow-diffusing solute atoms reduce vacancy diffusion in advanced high-temperature alloys?

    Kamal Nayan Goswami & Alessandro Mottura, 1 Nov 2014, In: Materials Science and Engineering A. 617, p. 194-199 6 p.

    Research output: Contribution to journal › Article › peer-review

  30. Published

    A method of heat-treatment of near gamma-TiAl to enhance oxidation resistance by the formation of a Ti₅Si₃ layer

    Simon Gray, Mike Jacobs, Clive Ponton & Hugh Evans, 1 Jan 2004, In: Materials Science and Engineering A. 384, 1-2, p. 77-82 6 p.

    Research output: Contribution to journal › Article

  31. Published

    Microstructure and microhardness of Ti6246 linear friction weld

    Yu-Lung Chiu, Hangyue Li & Paul Bowen, 1 Feb 2013, In: Materials Science and Engineering A. 562, p. 17-24 8 p.

    Research output: Contribution to journal › Article › peer-review

  32. Published

    Acoustic emission study of fatigue crack propagation in extruded AZ31 magnesium alloy

    Mayorkinos Papaelias & Claire Davis, 12 Mar 2014, In: Materials Science and Engineering A. 597, p. 270–278

    Research output: Contribution to journal › Article › peer-review

  33. Published

    Microstructures and properties of investment castings of gamma titanium aluminide

    Richard Harding, Jian Kuang & John Campbell, 1 Jan 2001, In: Materials Science and Engineering A. 329-331c, p. 31-37 7 p.

    Research output: Contribution to journal › Article

  34. Published

    Uphill diffusion in ternary Ni-Re-Ru alloys at 1000 and 1100 degrees C

    Roger Reed, 1 Jan 2007, In: Materials Science and Engineering A. 460, p. 587-594 8 p.

    Research output: Contribution to journal › Article

  35. Published

    Anisotropy of <a > slip behaviour in single-colony lamellar structures of Ti–6Al–4V

    Rengen Ding, Paul Bowen, 7 Feb 2018, In: Materials Science and Engineering A. 715, p. 315-319

    Research output: Contribution to journal › Article › peer-review

  36. Published

    Thermal stability of Ti–46Al–5Nb–1W alloy

    Zewen Huang & Paul Bowen, 1 Jun 2002, In: Materials Science and Engineering A. 329-331, 31, p. 435-445 11 p.

    Research output: Contribution to journal › Article

  37. Published

    On the role of thermal exposure on the stress controlled fatigue behaviour of a high strength titanium–aluminum alloy

    Zewen Huang, 6 Oct 2014, In: Materials Science and Engineering A. 615, p. 29-41 13 p.

    Research output: Contribution to journal › Article › peer-review

  38. E-pub ahead of print

    On the role of thermal exposure on the stress controlled fatigue behavior Of an intermediate strength γ−TiAl based alloy

    Zewen Huang, 31 Mar 2015, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  39. Published

    The bonding of nickel foam to Ti-6Al-4V using Ti-Cu-Ni braze alloy

    Tom Jarvis, 1 Mar 2011, In: Materials Science and Engineering A. 528, 6, p. 2592-2601 10 p.

    Research output: Contribution to journal › Article

  40. Published

    Microstructures and mechanical properties of Nb-Ti-C alloys

    Ian Jones, 1 Jan 2008, In: Materials Science and Engineering A. 485, 1-2, p. 359-366 8 p.

    Research output: Contribution to journal › Article

  41. Published

    Observation of tension/compression asymmetry in an Nb-Al-V alloy

    Huisheng Jiao, Tiesheng Rong, Ian Jones, 1 Jan 2004, In: Materials Science and Engineering A. 387-389, p. 476-480 5 p.

    Research output: Contribution to journal › Article

  42. Published

    Characterisation of precipitation and carbide coarsening in low carbon low alloy Q&T steels during the early stages of tempering

    Martin Strangwood & Claire Davis, 19 Dec 2018, In: Materials Science and Engineering A. 738, p. 174-189 16 p.

    Research output: Contribution to journal › Article › peer-review

  43. Published

    Effect of increased interfacial strength on the fatigue crack growth resistance and crack opening displacement of β Ti21S/SCS 6 composites

    Paul Bowen, 15 Mar 2008, In: Materials Science and Engineering A. 476, 1-2, p. 301-307 7 p.

    Research output: Contribution to journal › Article

  44. Published

    Abnormal microstructure in the weld zone of linear friction welded Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy joint and its influence on joint properties

    KeeHyun Park, 2 Apr 2014, In: Materials Science and Engineering A. 599, p. 38-45 8 p.

    Research output: Contribution to journal › Article › peer-review

  45. Published

    On the thermo-mechanical stability and oxidation behavior of carbon S-phase at elevated temperature and under tensile stress

    Hanshan Dong, 1 Apr 2014, In: Materials Science and Engineering A. 600, p. 90-98

    Research output: Contribution to journal › Article › peer-review

  46. Published

    Nanoscale precipitation in aged Al-3.5Cu-0.4Mg-0.2Ge alloy

    Wei Liu, Biao Cai & Shaohua Zhong, 2013, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › peer-review

  47. Published

    Effect of yttria inclusion on room temperature tensile properties of investment cast TiAl

    Paul Withey, 17 Jan 2018, In: Materials Science and Engineering A. 712, p. 73-79

    Research output: Contribution to journal › Article › peer-review

  48. Published

    Amorphization and microstructural evolution in multicomponent (FeCoNi) 70Zr10B20 alloy systems by mechanical alloying process

    Isaac Chang & Paul Bowen, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 389-393 5 p.

    Research output: Contribution to journal › Article

  49. Published

    Compsitional dependance of crystallisation behaviour of mechanically alloyed amorphous Fe-Ni-Zr-B alloys

    Isaac Chang, 28 Feb 2002, In: Materials Science and Engineering A. 325, p. 25-30 6 p.

    Research output: Contribution to journal › Article

  50. Published

    Thermodynamic and magnetic properties of multicomponent (Fe,Ni)70Zr10B20 amorphous alloy powders made by mechanical alloying

    Isaac Chang, 31 May 2001, In: Materials Science and Engineering A. 304-306, p. 992-996 5 p.

    Research output: Contribution to journal › Article

Previous 1 2 Next