Materials Characterization, ‎1044-5803

Journal

1 - 10 out of 25Page size: 10

Publications

  1. 2020
  2. Published

    Secondary phase area fraction determination using SEM-EDS quantitative mapping

    Ian Jones & , Sep 2020, In: Materials Characterization. 167, 110506.

    Research output: Contribution to journal › Article › peer-review

  3. Published

    Effect of misorientation angle and chromium concentration on grain boundary sensitisation in an austenitic stainless steel

    John Hewett, Ian Jones, Brian Connolly & , Jun 2020, In: Materials Characterization. 164, 110343.

    Research output: Contribution to journal › Article › peer-review

  4. Published

    A study of microstructure and mechanical property of a burn-resistant Ti alloy fabricated by HIPping

    Rengen Ding, & , May 2020, In: Materials Characterization. 163, 11 p., 110280.

    Research output: Contribution to journal › Article › peer-review

  5. Published

    Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment

    Luke Carter, Moataz Attallah & , May 2020, In: Materials Characterization. 163, 14 p., 110225.

    Research output: Contribution to journal › Article › peer-review

  6. 2019
  7. Published

    Microstructural evolution of Alloy 709 during aging

    Rengen Ding, , Hangyue Li, Suyang Yu, & Paul Bowen, Aug 2019, In: Materials Characterization. 154, p. 400-423 24 p.

    Research output: Contribution to journal › Article › peer-review

  8. Published

    Kink boundaries and their role in dynamic recrystallisation of a Mg-Zn-Y alloy

    Yu-Lung Chiu, 1 Feb 2019, In: Materials Characterization. 148, p. 233-242 10 p.

    Research output: Contribution to journal › Article › peer-review

  9. Published

    Study the grain boundary triple junction segregation of phosphorus in a nickel-base alloy using energy dispersive X-ray spectroscopy on a transmission electron microscope

    Yu-Lung Chiu, Feb 2019, In: Materials Characterization. 148, p. 156-161 6 p.

    Research output: Contribution to journal › Article › peer-review

  10. Published

    Rapid electron backscatter diffraction mapping: Painting by numbers

    Sandy Knowles, & , Jan 2019, In: Materials Characterization. 147, p. 271-279 8 p.

    Research output: Contribution to journal › Article › peer-review

  11. 2018
  12. Published

    Electron microscopy study of the formation mechanism of catalytic nickel rich particles and the role of carbonyl sulphide in the suppression of carbon deposition on 20Cr-25Ni steel

    Subash Rai, Mary Taylor, Yu-Lung Chiu, Hugh Evans, , & , Oct 2018, In: Materials Characterization. 144, p. 505-515 11 p.

    Research output: Contribution to journal › Article › peer-review

  13. Published

    Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron-beam melting

    1 Jul 2018, In: Materials Characterization. 141, p. 1-7

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 3 Next