Dental Materials, ‎0109-5641

Journal

Publications

  1. 2021
  2. Accepted/In press

    4D microstructural changes in dentinal tubules during acid demineralisation

    Robert Harper, Richard Shelton, Gabriel Landini & , 3 Sep 2021, (Accepted/In press) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  3. E-pub ahead of print

    Effect of different manipulations on the physical, chemical and microstructural characteristics of Biodentine

    Josette Camilleri, 15 Apr 2021, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  4. 2020
  5. E-pub ahead of print

    Antimicrobial and physicochemical characterization of endodontic sealers after exposure to chlorhexidine digluconate

    Josette Camilleri & , 5 Dec 2020, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  6. E-pub ahead of print

    Characterization of heat resistant hydraulic sealer for warm vertical obturation

    Mohammed Hadis & Josette Camilleri, 3 Jun 2020, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  7. Published

    High speed imaging of biofilm removal from a dental implant model using ultrasonic cavitation

    Nina Vyas, , Sarah Kuehne, Rachel Sammons & Damien Walmsley, Jun 2020, In: Dental Materials. 36, 6, p. 733-743 11 p.

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Photo-polymerisation variables influence the structure and subsequent thermal response of dental resin matrices

    Will Palin, , , & , Mar 2020, In: Dental Materials. 36, 3, p. 343-352 10 p.

    Research output: Contribution to journalArticlepeer-review

  9. Published

    Standardization of antimicrobial testing of dental devices

    Josette Camilleri, , , , , , , , , , & , Mar 2020, In: Dental Materials. 36, 3, p. e59-e73 15 p.

    Research output: Contribution to journalReview articlepeer-review

  10. 2019
  11. Published

    Bioactivity potential of Portland cement in regenerative endodontic procedures: from clinic to lab

    Josette Camilleri, & , 1 Sep 2019, In: Dental Materials. 35, 9, p. 1342-1350 9 p.

    Research output: Contribution to journalArticlepeer-review

  12. Published

    Investigation of the effect of the water to powder ratio on hydraulic cement properties

    Hannah Batchelor, Sarah Kuehne, Paul Cooper & Josette Camilleri, Aug 2019, In: Dental Materials. 35, 8, p. 1146-1154 9 p.

    Research output: Contribution to journalArticlepeer-review

  13. 2018
  14. Published
  15. E-pub ahead of print

    Intracoronal stress transfer through enamel following RBC photopolymerisation: A synchrotron X-ray study

    Owen Addison, , , , & , 14 Aug 2018, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  16. E-pub ahead of print

    Bonding to caries affected dentine

    Josette Camilleri, , , & , 8 Jun 2018, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalArticlepeer-review

  17. E-pub ahead of print

    Shining a light on high volume photocurable materials

    Will Palin, & Mohammed Hadis, 14 Mar 2018, (E-pub ahead of print) In: Dental Materials.

    Research output: Contribution to journalReview articlepeer-review

  18. 2017
  19. Published

    Favorable residual stress induction by resin-cementation on dental porcelain

    Xu Cao, & Owen Addison, 16 Aug 2017, In: Dental Materials. 33, 11, p. 1258-1265

    Research output: Contribution to journalArticlepeer-review

  20. Published

    The impact of resin-coating on sub-critical crack extension in a porcelain laminate veneer material

    Xu Cao, Garry Fleming & Owen Addison, 1 May 2017, In: Dental Materials. 33, 5, p. 498-504

    Research output: Contribution to journalArticlepeer-review

  21. 2016
  22. Published

    Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties

    Will Palin, & , Dec 2016, In: Dental Materials. 32, 12, p. 1586-1599 14 p.

    Research output: Contribution to journalArticlepeer-review

  23. Published
  24. 2015
  25. Published

    Adherence of oral streptococci to nanostructured titanium surfaces

    Owen Addison, , , , Rachel Sammons & , Dec 2015, In: Dental Materials. 31, 12, p. 1460-1468

    Research output: Contribution to journalArticlepeer-review

  26. 2014
  27. Published

    The effect of ultra-fast photopolymerisation of experimental composites on shrinkage stress, network formation and pulpal temperature rise

    Will Palin, , , , & , Nov 2014, In: Dental Materials. 30, 11, p. 1280-1289

    Research output: Contribution to journalArticlepeer-review

  28. Published

    Biaxial flexure strength determination of endodontically accessed ceramic restorations

    Garry Fleming, , Will Palin & Owen Addison, Aug 2014, In: Dental Materials. 30, 8, p. 902-9 8 p.

    Research output: Contribution to journalArticlepeer-review

  29. Published
  30. Published

    Ultra-fast light-curing resin composite with increased conversion and reduced monomer elution

    Will Palin, , , , & , May 2014, In: Dental Materials. 30, 5, p. 594-604

    Research output: Contribution to journalArticlepeer-review

  31. Published

    Developments in low level light therapy (LLLT) for dentistry

    Michael Milward, Paul Cooper, Mohammed Hadis & Will Palin, 2014, In: Dental Materials. 30, 5, p. 465-475

    Research output: Contribution to journalArticlepeer-review

  32. 2013
  33. Published
  34. Published

    Progress in dimethacrylate-based dental composite technology and curing efficiency

    Will Palin, Mohammed Hadis, & , Feb 2013, In: Dental Materials. 29, 2, p. 139-56 18 p.

    Research output: Contribution to journalArticlepeer-review

  35. 2012
  36. Published

    The influence of resin flexural modulus on the magnitude of ceramic strengthening

    Owen Addison, 1 Jul 2012, In: Dental Materials. 28, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticle

  37. Published
  38. Published

    Machining variability impacts on the strength of a 'chair-side' CAD-CAM ceramic.

    Owen Addison, Xu Cao, & , 10 May 2012, In: Dental Materials.

    Research output: Contribution to journalArticle

  39. Published
  40. Published

    Specimen aspect ratio and light transmission in photoactive dental resins

    Mohammed Hadis, Adrian Shortall & Will Palin, 2012, In: Dental Materials. 28, 11, p. 1154-61 8 p.

    Research output: Contribution to journalArticlepeer-review

  41. 2011
  42. Published
  43. Published

    Transient and residual stresses induced during the sintering of two dentin ceramics

    Owen Addison & , 1 Apr 2011, In: Dental Materials. 27, 4, p. 379-385 7 p.

    Research output: Contribution to journalArticle

  44. Published
  45. 2010
  46. Published

    Dynamic monitoring of refractive index change through photoactive resins

    Mohammed Hadis, , Adrian Shortall & Will Palin, 1 Nov 2010, In: Dental Materials. 26, 11, p. 1106-1112 7 p.

    Research output: Contribution to journalArticle

  47. Published

    Seating load parameters impact on dental ceramic reinforcement conferred by cementation with resin-cements

    Owen Addison, & , 1 Sep 2010, In: Dental Materials. 26, 9, p. 915-921 7 p.

    Research output: Contribution to journalArticle

  48. Published
  49. Published

    The flexural properties of endodontic post materials

    Dominic Stewardson, Adrian Shortall, Peter Marquis & Phil Lumley, 1 Aug 2010, In: Dental Materials. 26, 8, p. 730-736 7 p.

    Research output: Contribution to journalArticle

  50. Published

    Dynamic monitoring of curing photoactive resins: A methods comparison

    Adrian Shortall & Will Palin, 1 Jun 2010, In: Dental Materials. 26, 6, p. 565-570 6 p.

    Research output: Contribution to journalArticle

  51. 2009
  52. Published

    Oxygen inhibition and incremental layer bond strengths of resin composites

    Adrian Shortall, Owen Addison & Will Palin, 1 Nov 2009, In: Dental Materials. 25, 11, p. 1338-1346 9 p.

    Research output: Contribution to journalArticle

  53. Published
  54. Published
  55. 2008
  56. Published

    Application of analytical stress solutions to bi-axially loaded dental ceramic–dental cement bilayers

    Owen Addison & , 1 Oct 2008, In: Dental Materials. 24, 10, p. 1336-1342 7 p.

    Research output: Contribution to journalArticle

  57. Published

    Cure width potential for MOD resin composite molar restorations

    Will Palin, , Peter Marquis & Adrian Shortall, 1 Aug 2008, In: Dental Materials. 24, 8, p. 1083-94 12 p.

    Research output: Contribution to journalArticle

  58. Published
  59. Published

    The potential of a resin-composite to be cured to a 4mm depth

    Paul Cooper & , 1 Apr 2008, In: Dental Materials. 24, 4, p. 522-9 8 p.

    Research output: Contribution to journalArticle

  60. 2007
  61. Published
  62. Published
  63. Published

    Corrosion of nickel-based dental casting alloys

    Alison Davenport, Richard Shelton & , 1 Jun 2007, In: Dental Materials. 23, 6, p. 714-723 10 p.

    Research output: Contribution to journalArticle

  64. Published

    Quantum yield of conversion of the photoinitiator camphorquinone

    1 Jun 2007, In: Dental Materials. 23, 6, p. 655-664 10 p.

    Research output: Contribution to journalArticle

  65. Published
  66. Published
  67. 2006
  68. Published
  69. 2005
  70. Published
  71. Published
  72. Published

    Qualitative assessment of surface topography of XeCI laser etched Ni-Cr

    David Attrill & , 1 Sep 2005, In: Dental Materials. 9, 21, p. 837-845 9 p.

    Research output: Contribution to journalArticle

  73. Published
  74. Published
  75. Published
  76. Published
  77. 2004
  78. Published
  79. Published
  80. 2003
  81. Published

    A palladium-free gallium-based alloy: Analysis of composition and microstructure

    Garry Fleming, Peter Marquis & Adrian Shortall, 1 Nov 2003, In: Dental Materials. 19, 7, p. 653-661 9 p.

    Research output: Contribution to journalArticle

  82. Published

    The effect of thermocycling on the strength of porcelain laminate veneer (PLV) materials

    Owen Addison, Garry Fleming & Peter Marquis, 1 Jun 2003, In: Dental Materials. 19, 4, p. 291-7 7 p.

    Research output: Contribution to journalArticle

  83. Published
  84. Published
  85. Published

    The influence of thermocycling on the longevity of porcelain laminate veneer (PLV) restorations

    Garry Fleming & Peter Marquis, 1 Jan 2003, In: Dental Materials. 19, p. 292-298 7 p.

    Research output: Contribution to journalArticle

  86. 2002
  87. Published

    Bacterial microleakage and pulp inflammation associated with various restorative materials

    Peter Murray, , & Tony Smith, 1 Sep 2002, In: Dental Materials. 18, 6, p. 470-478 9 p.

    Research output: Contribution to journalArticle

  88. Published

    Dynamic mechanical analysis of storage modulus development in light-activated polymer matrix composites

    1 May 2002, In: Dental Materials. 18, 3, p. 197-202 6 p.

    Research output: Contribution to journalArticle

  89. Published

    Potential countersample materials for in vitro simulation wear testing

    Adrian Shortall, & Peter Marquis, 1 May 2002, In: Dental Materials. 18, 3, p. 246-54 9 p.

    Research output: Contribution to journalArticle

  90. Published

    Blood contamination and dentin bonding—effect of anticoagulant in laboratory studies

    Thomas Dietrich, & , 1 Mar 2002, In: Dental Materials. 18, 2, p. 159-162 4 p.

    Research output: Contribution to journalArticle

  91. 2001
  92. Published
  93. Published