Corrosion Science, 0010-938X

Journal

1 - 20 out of 35Page size: 20

Publications

  1. Published

    Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium

    Alison Davenport, 1 Nov 2006, In: Corrosion Science. 48, 11, p. 3455-3471 17 p.

    Research output: Contribution to journal › Article

  2. Published

    Microstructure and corrosion of Pd-modified Ti alloys produced by powder metallurgy

    Mark Ashworth, Alison Davenport, Mark Ward, 1 Jul 2010, In: Corrosion Science. 52, 7, p. 2413-2421 9 p.

    Research output: Contribution to journal › Article

  3. Published

    Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices

    Jong-Eun Hong, Robert Steinberger-Wilckens, 1 Apr 2020, In: Corrosion Science. 165, 10 p., 108414.

    Research output: Contribution to journal › Article › peer-review

  4. Published

    Emeraldine base as corrosion protective layer on aluminium alloy AA5182, effect of the surface microstructure

    Alison Davenport, 1 Feb 2007, In: Corrosion Science. 49, 2, p. 818-829 12 p.

    Research output: Contribution to journal › Article

  5. Published

    Comparison of Chromia Growth Kinetics in a Ni-based Superalloy, with and without Shot-peening

    Sam Cruchley, Mary Taylor, Rengen Ding, Hugh Evans, 1 Nov 2015, In: Corrosion Science. 100, p. 242-252 11 p.

    Research output: Contribution to journal › Article › peer-review

  6. Published

    Chromia layer growth on a Ni-based superalloy : sub-parabolic kinetics and the role of titanium

    Sam Cruchley, Hugh Evans, Mary Taylor, Oct 2013, In: Corrosion Science. 75, p. 58-66 9 p.

    Research output: Contribution to journal › Article › peer-review

  7. Published

    Characterisation by X-ray absorption near-edge spectroscopy of KMnO4-based no-rinse conversion coatings on Al and Al alloys

    Alison Davenport, 1 Apr 2007, In: Corrosion Science. 49, 4, p. 1981-1991 11 p.

    Research output: Contribution to journal › Article

  8. Published

    Influence of low CO concentration on catalysed carbon deposition on 20Cr25Ni steel in CO⁠2 environments containing ethene

    Rengen Ding, Mary Taylor, Hugh Evans, Yu-Lung Chiu, 25 Sep 2018, In: Corrosion Science. 143, p. 56-64 9 p.

    Research output: Contribution to journal › Article › peer-review

  9. Published

    High temperature corrosion mechanisms of certain new TiAl-based intermetallic alloys in an aggressive H2/H2O/H2S environment at 850 °C

    Dawei Hu & Xinhua Wu, 1 May 2007, In: Corrosion Science. 49, 5, p. 2406-2420 15 p.

    Research output: Contribution to journal › Article

  10. Published

    In situ monitoring of corrosion processes within the bulk of AlMgSi alloys using X-ray microtomography

    Alison Davenport, Brian Connolly, 1 Dec 2008, In: Corrosion Science. 50, 12, p. 3455-3466 12 p.

    Research output: Contribution to journal › Article

  11. Published

    The formation of phosphate coatings on nitrided stainless steel

    Tom Bell, 1 Sep 2001, In: Corrosion Science. 43, 9, p. 1711-1725 15 p.

    Research output: Contribution to journal › Article

  12. Published

    Synchrotron X-ray radiography studies of pitting corrosion of stainless steel: Extraction of pit propagation parameters

    Majid Ghahari, Trevor Rayment & Alison Davenport, 1 Nov 2015, In: Corrosion Science. 100, p. 23-35

    Research output: Contribution to journal › Article › peer-review

  13. Published

    In situ synchrotron X-ray micro-tomography study of pitting corrosion in stainless steel

    Alison Davenport, Trevor Rayment, 1 Sep 2011, In: Corrosion Science. 53, 9, p. 2684-2687 4 p.

    Research output: Contribution to journal › Article

  14. Published

    Backscattered electron imaging of the stell concrete interface

    1 Apr 2001, In: Corrosion Science. 43, 4, p. 605-610 6 p.

    Research output: Contribution to journal › Article

  15. Published

    Cathodic protection afforded by an intermittent current applied to reinforced concrete

    1 Jun 2001, In: Corrosion Science. 43, 6, p. 1111-1131 21 p.

    Research output: Contribution to journal › Article

  16. Published

    Effects of Y2O3 nanoparticles on the high-temperature oxidation behavior of IN738LC manufactured by laser powder bed fusion

    Mark Ward, 15 Jul 2020, In: Corrosion Science. 171, 17 p., 108715.

    Research output: Contribution to journal › Article › peer-review

  17. Published

    The effect of relative humidity change on atmospheric pitting corrosion of stainless steel 304L

    Steven Street, Haval Mohammed Ali, Andrew Du Plessis, Trevor Rayment & Alison Davenport, 15 Apr 2019, In: Corrosion Science. 150, p. 110-120 11 p.

    Research output: Contribution to journal › Article › peer-review

  18. Published

    Novel images of the evolution of stress corrosion cracks from corrosion pits

    Brian Connolly, 1 Nov 2011, In: Corrosion Science. 53, 11, p. 3466-3485 20 p.

    Research output: Contribution to journal › Article

  19. Published

    The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024-T351

    Alison Davenport, Brian Connolly, 1 Feb 2007, In: Corrosion Science. 48, 2, p. 877-909 33 p.

    Research output: Contribution to journal › Article

  20. Published

    In situ X-ray tomography of intergranular corrosion of 2024 and 7050 aluminium alloys

    Alison Davenport, 1 Dec 2010, In: Corrosion Science. 52, 12, p. 3855-3860 6 p.

    Research output: Contribution to journal › Article

Previous 1 2 Next