Acta Materialia, 1359-6454

Journal

Publications

  1. 2021
  2. Published

    Ultra-high temperature deformation in a single crystal superalloy: Mesoscale process simulation and micromechanisms

    David Collins, Jan 2021, In : Acta Materialia. 203, 116468.

    Research output: Contribution to journalArticlepeer-review

  3. 2020
  4. Published
  5. Published

    Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: in situ neutron diffraction

    Minshi Wang & Biao Cai, Nov 2020, In : Acta Materialia. 200, p. 943-958 16 p.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    Cold creep of titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations

    David Collins, 15 Oct 2020, In : Acta Materialia. 199, p. 561-577

    Research output: Contribution to journalArticlepeer-review

  7. Published

    Effect of ageing on the microstructural evolution in a new design of maraging steels with carbon

    Sandy Knowles, 1 Sep 2020, In : Acta Materialia. 196, p. 101-121 20 p.

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Growth mechanism of subsurface hydrogen cavities in tungsten exposed to low-energy high-flux hydrogen plasma

    Yu-Lung Chiu, 31 Jul 2020, In : Acta Materialia. 193, p. 19-27 9 p.

    Research output: Contribution to journalArticlepeer-review

  9. Published

    On the modelling of precipitation kinetics in a turbine disc nickel based superalloy

    Paul Bowen & Hector Basoalto, 1 Jun 2020, In : Acta Materialia. 191, p. 81-100 20 p.

    Research output: Contribution to journalArticlepeer-review

  10. Published

    High-speed synchrotron X-ray imaging of glass foaming and thermal conductivity simulation

    Biao Cai, 1 May 2020, In : Acta Materialia. 189, p. 85-92 8 p.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    Dislocation density distribution at slip band-grain boundary intersections

    David Collins, Jan 2020, In : Acta Materialia. 182, p. 172-183 12 p.

    Research output: Contribution to journalArticlepeer-review

  12. Accepted/In press

    Revealing the mechanisms by which magneto-hydrodynamics disrupts solidification microstructures

    Biao Cai, 2020, (Accepted/In press) In : Acta Materialia.

    Research output: Contribution to journalArticlepeer-review

  13. 2019
  14. Published
  15. Published

    Non-classical interstitial sites and anomalous diffusion mechanisms in hcp-titanium

    Nils Warnken & Alessandro Mottura, 15 Sep 2019, In : Acta Materialia. 177, p. 68-81 14 p.

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Development of Ni-free Mn-stabilised maraging steels using Fe2SiTi precipitates

    Sandy Knowles, 1 Aug 2019, In : Acta Materialia. 174, p. 260-270 11 p.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Fine alpha in current and newly developed Ti alloys

    Minshi Wang, Yu Lu, Bo Pang, Yu-Lung Chiu & Michael Loretto, Jul 2019, In : Acta Materialia. 173, p. 242-248 7 p.

    Research output: Contribution to journalArticlepeer-review

  18. Published
  19. Published

    Formation mechanism of abnormally large grains in a polycrystalline nickel-based superalloy during heat treatment processing

    Biao Cai, 15 Apr 2019, In : Acta Materialia. 168, p. 287-298 12 p.

    Research output: Contribution to journalArticlepeer-review

  20. Published

    High temperature, low neutron cross-section high- entropy alloys in the Nb-Ti-V-Zr system

    Sandy Knowles, 1 Mar 2019, In : Acta Materialia. 166, p. 435-446 12 p.

    Research output: Contribution to journalArticlepeer-review

  21. Published

    The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V

    Yu Lu, Yu-Lung Chiu & Michael Loretto, 15 Feb 2019, In : Acta Materialia. 165, p. 520-527 8 p.

    Research output: Contribution to journalArticlepeer-review

  22. Published
  23. 2018
  24. Published
  25. E-pub ahead of print
  26. Published
  27. Published
  28. Published
  29. Published
  30. E-pub ahead of print

    Complete ductility in NdFeB-type alloys using the Hydrogen Ductilisation Process (HyDP)

    Oliver Brooks, Allan Walton & Ivor Harris, 27 Apr 2018, In : Acta Materialia.

    Research output: Contribution to journalArticlepeer-review

  31. Published

    The defect evolution in shock loaded tantalum single crystals

    Bo Pang, Ian Jones, Yu-Lung Chiu, 15 Apr 2018, In : Acta Materialia. 148, p. 482-491 10 p.

    Research output: Contribution to journalArticlepeer-review

  32. Published

    First-principles modeling of superlattice intrinsic stacking fault energies in Ni3Al based alloys

    Abed Breidi & Alessandro Mottura, 15 Feb 2018, In : Acta Materialia. 145, p. 97-108

    Research output: Contribution to journalArticlepeer-review

  33. Published

    Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility

    Yu-Lung Chiu, 1 Feb 2018, In : Acta Materialia. 144, p. 129-137 9 p.

    Research output: Contribution to journalArticlepeer-review

  34. Published

    Fluid and particle dynamics in laser powder bed fusion

    Mark Ward, Moataz Attallah, 1 Jan 2018, In : Acta Materialia. 142, p. 107-120 14 p.

    Research output: Contribution to journalArticlepeer-review

  35. 2017
  36. Published

    On the microtwinning mechanism in a single crystal superalloy

    David Collins, 15 Aug 2017, In : Acta Materialia. 135, p. 314-329 16 p.

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Thermoablative resistance of ZrB 2 -SiC-WC ceramics at 2400 °C

    Ji Zou, Virtudes Rubio Diaz & Jon Binner, 1 Jul 2017, In : Acta Materialia. 133, p. 293-302

    Research output: Contribution to journalArticlepeer-review

  38. Published

    Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing

    Hany Hassanin, Moataz Attallah, Jul 2017, In : Acta Materialia. 133, p. 269-281 13 p.

    Research output: Contribution to journalArticlepeer-review

  39. Published

    Nucleation of recrystallisation in castings of single crystal Ni-based superalloys

    Chinnapat Panwisawas, 1 May 2017, In : Acta Materialia. 129, p. 112-123 13 p.

    Research output: Contribution to journalArticlepeer-review

  40. Published

    Thermal and electrical transport in ZrB2-SiC-WC ceramics up to 1800 °C

    Ji Zou, 1 May 2017, In : Acta Materialia. 129, p. 159-169 10 p.

    Research output: Contribution to journalArticlepeer-review

  41. Published

    Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy

    Luke Carter, Bo Pang, Moataz Attallah & Michael Loretto, 15 Apr 2017, In : Acta Materialia. 128, p. 87-95

    Research output: Contribution to journalArticlepeer-review

  42. Published

    Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction

    Biao Cai, 1 Apr 2017, In : Acta Materialia. 127, p. 471-480

    Research output: Contribution to journalArticlepeer-review

  43. Published

    Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy

    David Collins, 1 Mar 2017, In : Acta Materialia. 126, p. 361-371 11 p.

    Research output: Contribution to journalArticlepeer-review

  44. Published
  45. Published

    On the breakaway oxidation of Fe9Cr1Mo steel in high pressure CO2

    Yu-Lung Chiu, 16 Feb 2017, In : Acta Materialia.

    Research output: Contribution to journalArticlepeer-review

  46. Published

    A synchrotron X-ray diffraction study of non-proportional strain-path effects

    David Collins, 1 Feb 2017, In : Acta Materialia. 124, p. 290-304 15 p.

    Research output: Contribution to journalArticlepeer-review

  47. Published

    On the role of boron on improving ductility in a new polycrystalline superalloy

    David Collins, 1 Feb 2017, In : Acta Materialia. 124, p. 489-500 12 p.

    Research output: Contribution to journalArticlepeer-review

  48. Published

    Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography

    Biao Cai, 15 Jan 2017, In : Acta Materialia. 123, p. 373-382

    Research output: Contribution to journalArticlepeer-review

  49. 2016
  50. Published

    4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification

    Biao Cai, 15 Sep 2016, In : Acta Materialia. 117, p. 160-169

    Research output: Contribution to journalArticlepeer-review

  51. Published

    An extension of mean-field coarsening theory to include particle coalescence using nearest-neighbour functions

    Hector Basoalto & Magnus Anderson, 15 Sep 2016, In : Acta Materialia. 117, p. 122-134

    Research output: Contribution to journalArticlepeer-review

  52. Published

    Microstructure and strength of selectively laser melted AlSi10Mg

    Moataz Attallah & Michael Loretto, 15 Sep 2016, In : Acta Materialia. 117, p. 311-320

    Research output: Contribution to journalArticlepeer-review

  53. Published

    Application of a multi-component mean field model to the coarsening behaviour of a nickel-based superalloy

    Magnus Anderson & Hector Basoalto, Aug 2016, In : Acta Materialia. 114, p. 80-96

    Research output: Contribution to journalArticlepeer-review

  54. Published
  55. Published

    Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy

    Biao Cai, 1 Feb 2016, In : Acta Materialia. 105, p. 338-346

    Research output: Contribution to journalArticlepeer-review

  56. Published
  57. Published

    A study of dislocation transmission through a grain boundary in hcp Ti-6Al using micro-cantilevers

    Rengen Ding & Ian Jones, 15 Jan 2016, In : Acta Materialia. 103, p. 416-423 8 p.

    Research output: Contribution to journalArticlepeer-review

  58. Published

    Selective laser melting of Invar 36: microstructure and properties

    Chunlei Qiu, Nicholas Adkins & Moataz Attallah, 15 Jan 2016, In : Acta Materialia. 103, p. 382-395 14 p.

    Research output: Contribution to journalArticlepeer-review

  59. 2015
  60. Published
  61. Published

    Measurements of stress fields near a grain boundary: Exploring blocked arrays of dislocations in 3D

    David Collins, Sep 2015, In : Acta Materialia. 96, p. 229-236 8 p.

    Research output: Contribution to journalArticlepeer-review

  62. Published

    Time-resolved synchrotron diffractometry of phase transformations in high strength nickel-based superalloys

    David Collins, 1 Aug 2015, In : Acta Materialia. 94, p. 244-256 13 p.

    Research output: Contribution to journalArticlepeer-review

  63. Published

    A synchrotron X-ray diffraction study of in situ biaxial deformation

    David Collins, 15 May 2015, In : Acta Materialia. 90, p. 46-58 13 p.

    Research output: Contribution to journalArticlepeer-review

  64. Published
  65. Published

    High resolution energy dispersive spectroscopy mapping of planar defects in L12-containing Co-base superalloys

    Alessandro Mottura, 1 May 2015, In : Acta Materialia. 89, p. 423–437

    Research output: Contribution to journalArticlepeer-review

  66. Published

    Plasma-nitriding and characterization of FeAl40 iron aluminide

    Zhenxue Zhang & Hanshan Dong, 1 Mar 2015, In : Acta Materialia. 86, p. 341-351

    Research output: Contribution to journalArticlepeer-review

  67. Published
  68. 2014
  69. Published
  70. Published

    <c + a> dislocations in deformed Ti–6Al–4V micro-cantilevers

    Rengen Ding & Ian Jones, 1 Sep 2014, In : Acta Materialia. 76, p. 127-134 8 p.

    Research output: Contribution to journalArticlepeer-review

  71. Published

    Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys

    Alessandro Mottura, Nils Warnken, Babak Raeisinia, 15 Aug 2014, In : Acta Materialia. 75, p. 356-370 15 p.

    Research output: Contribution to journalArticlepeer-review

  72. Published
  73. Published

    Three-dimensional characterization of the permeability of W–Cu composites using a new “TriBeam” technique

    Alessandro Mottura, Feb 2014, In : Acta Materialia. 64, p. 307-315 9 p.

    Research output: Contribution to journalArticlepeer-review

  74. 2013
  75. Published

    Lattice misfit during ageing of a polycrystalline nickel-base superalloy

    David Collins, Dec 2013, In : Acta Materialia. 61, 20, p. 7791-7804 14 p.

    Research output: Contribution to journalArticlepeer-review

  76. Published

    Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy

    David Collins, May 2013, In : Acta Materialia. 61, 9, p. 3378-3391 14 p.

    Research output: Contribution to journalArticlepeer-review

  77. Published

    Oxidation ahead of a crack tip in an advanced Ni-based superalloy

    Hangyue Li, Hugh Evans, Rengen Ding, Ian Jones, Paul Bowen, 1 Apr 2013, In : Acta Materialia. 61, 6, p. 1968-1981 14 p.

    Research output: Contribution to journalArticlepeer-review

  78. Published

    Prediction of recrystallization in investment cast single-crystal superalloys

    Chinnapat Panwisawas, Jean-Christophe Gebelin & Roger Reed, Jan 2013, In : Acta Materialia. 61, 1, p. 51-66 16 p.

    Research output: Contribution to journalArticlepeer-review

  79. 2012
  80. Published

    Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys

    Atsushi Sato, Nils Warnken, Roger Reed, 1 Sep 2012, In : Acta Materialia. 60, 15, p. 5468-5480

    Research output: Contribution to journalArticlepeer-review

  81. Published

    A model for the creep deformation behaviour of nickel-based single crystal superalloys

    Nils Warnken & Roger Reed, 1 Jul 2012, In : Acta Materialia. 60, 12, p. 4888-4900

    Research output: Contribution to journalArticlepeer-review

  82. Published

    On the mechanism of porosity formation during welding of titanium alloys

    Jianglin Huang, Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Apr 2012, In : Acta Materialia. 60, 6-7, p. 3215-3225

    Research output: Contribution to journalArticlepeer-review

  83. Published

    On the possibility of rhenium clustering in nickel-based superalloys

    Alessandro Mottura & Roger Reed, 1 Apr 2012, In : Acta Materialia. 60, 6-7, p. 2866-2872 7 p.

    Research output: Contribution to journalArticlepeer-review

  84. 2011
  85. Published

    Effect of tensile stress on the formation of S-phase during low-temperature plasma carburizing of 316L foil

    Xiaoying Li & Hanshan Dong, 1 Aug 2011, In : Acta Materialia. 59, 14, p. 5765-5774 10 p.

    Research output: Contribution to journalArticle

  86. Published

    Linear friction welding of Ti-6Al-4V: Modelling and validation

    Richard Turner, Jean-Christophe Gebelin, Mark Ward & Roger Reed, 1 Jun 2011, In : Acta Materialia. 59, 10, p. 3792-3803 12 p.

    Research output: Contribution to journalArticle

  87. Published

    Creep and creep modelling of a multimodal nickel-base superalloy

    Hector Basoalto, 1 Feb 2011, In : Acta Materialia. 59, 3, p. 854-863

    Research output: Contribution to journalArticlepeer-review

  88. Published

    Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications

    Atsushi Sato & Roger Reed, 1 Jan 2011, In : Acta Materialia. 59, 1, p. 225-240 16 p.

    Research output: Contribution to journalArticlepeer-review

  89. 2010
  90. Published

    Coarsening of a multimodal nickel-base superalloy

    Hector Basoalto, 1 Jun 2010, In : Acta Materialia. 58, 11, p. 4019-4028

    Research output: Contribution to journalArticlepeer-review

  91. Published

    Atom probe tomography analysis of the distribution of rhenium in nickel alloys

    Alessandro Mottura, Nils Warnken, 1 Feb 2010, In : Acta Materialia. 58, 3, p. 931-942 12 p.

    Research output: Contribution to journalArticlepeer-review

  92. Published

    Effects of breakaway oxidation on local stresses in thermal barrier coatings

    Hugh Evans & Mary Taylor, 1 Feb 2010, In : Acta Materialia. 58, 4, p. 1242-1251 10 p.

    Research output: Contribution to journalArticle

  93. 2009
  94. Published

    Alloys-By-Design: Application to nickel-based single crystal superalloys

    Roger Reed & Nils Warnken, 1 Nov 2009, In : Acta Materialia. 57, 19, p. 5898-5913 16 p.

    Research output: Contribution to journalArticle

  95. Published

    Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys

    Nils Warnken, Roger Reed, 1 Nov 2009, In : Acta Materialia. 57, 19, p. 5862-5875 14 p.

    Research output: Contribution to journalArticle

  96. Published

    Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds

    Moataz Attallah, 1 Oct 2009, In : Acta Materialia. 57, 18, p. 5582-5592

    Research output: Contribution to journalArticlepeer-review

  97. Published

    Fabrication of free standing 316-L stainless steel-Al2O3 composite micro machine parts by soft moulding

    Kyle Jiang, 1 Sep 2009, In : Acta Materialia. 57, 16, p. 4751-4757 7 p.

    Research output: Contribution to journalArticle

  98. Published
  99. Published

    Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy

    Roger Reed, 1 Apr 2009, In : Acta Materialia. 57, 7, p. 2266-2276 11 p.

    Research output: Contribution to journalArticle

  100. Published

    Characterization of microplasticity in TiAl-based alloys

    Dawei Hu, Xinhua Wu, Michael Loretto, 1 Mar 2009, In : Acta Materialia. 57, 5, p. 1357-1366 10 p.

    Research output: Contribution to journalArticle

  101. Published

    Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ

    Timothy Doel, Paul Bowen, 1 Jan 2009, In : Acta Materialia. 57, 2, p. 590-599 10 p.

    Research output: Contribution to journalArticle

  102. 2008
  103. Published

    A critique of rhenium clustering in Ni-Re alloys using extended X-ray absorption spectroscopy

    Alessandro Mottura, 1 Jun 2008, In : Acta Materialia. 56, 11, p. 2669-2675 7 p.

    Research output: Contribution to journalArticlepeer-review

  104. Published
  105. Published

    Mechanism of competitive grain growth in directional solidification of a nickel-base superalloy

    Yizhou Zhou & Nick Green, 1 Jun 2008, In : Acta Materialia. 56, 11, p. 2631-2637 7 p.

    Research output: Contribution to journalArticle

  106. Published

    A model for the creep deformation behaviour of single-crystal superalloy CMSX-4

    Roger Reed, 1 Jan 2008, In : Acta Materialia. 56, 8, p. 1657-1670 14 p.

    Research output: Contribution to journalArticle

  107. Published

    On the compatibility of single crystal superalloys with a thermal barrier coating system

    Roger Reed, 1 Jan 2008, In : Acta Materialia. 56, 3, p. 313-323 11 p.

    Research output: Contribution to journalArticle

  108. Published

    On the numerical simulation of diffusion-controlled reactions under local equilibrium conditions

    Roger Reed, 1 Jan 2008, In : Acta Materialia. 56, 15, p. 3754-3760 7 p.

    Research output: Contribution to journalArticle

  109. Published

    The retention of thermal barrier coating systems on single-crystal superalloys: Effects of substrate composition

    Roger Reed, 1 Jan 2008, In : Acta Materialia. 56, 14, p. 3622-3629 8 p.

    Research output: Contribution to journalArticle

  110. 2007
  111. Published

    The mechanical properties and the deformation microstructures of the C15 Laves phase Cr2Nb at high temperatures

    Ian Jones, 1 Apr 2007, In : Acta Materialia. 55, 6, p. 1873-1884 12 p.

    Research output: Contribution to journalArticle

  112. Published

    A physics-based life prediction methodology for thermal barrier coating systems

    Hugh Evans, 1 Mar 2007, In : Acta Materialia. 55, 5, p. 1491-1503 13 p.

    Research output: Contribution to journalArticle

  113. 2006
  114. Published

    Analytical electron microscopy of C-free and C-containing Ti-15-3

    Xinhua Wu, Qiang Li, Dawei Hu & Michael Loretto, 1 Dec 2006, In : Acta Materialia. 54, 20, p. 5433-5448 16 p.

    Research output: Contribution to journalArticle

  115. Published

    Creep properties of a Pt-Aluminide coating

    Mary Taylor, Hugh Evans, 1 Jul 2006, In : Acta Materialia. 54, 12, p. 3241-3252 12 p.

    Research output: Contribution to journalArticle

  116. Published

    On the mechanism of formation of diffusional plate-shaped transformation products

    Malcolm Hall, 1 Mar 2006, In : Acta Materialia. 54, 5, p. 1227-1232 6 p.

    Research output: Contribution to journalArticle

  117. 2005
  118. Published

    Diffusion rates of 3d transition metal solutes in Nickel by first principles calculations

    Roger Reed, 1 May 2005, In : Acta Materialia. 53, p. 2369-2376 8 p.

    Research output: Contribution to journalArticle

  119. 2004
  120. Published

    Effects of defect geometry on fatigue crack growth behavior of cross-ply Ti-6Al-4V/SCS-6 metal matrix composites

    Paul Bowen, 17 May 2004, In : Acta Materialia. 52, 9, p. 2691-2700 10 p.

    Research output: Contribution to journalArticle

  121. Published

    The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites

    Paul Bowen, 5 Apr 2004, In : Acta Materialia. 52, p. 1423 - 1438 16 p.

    Research output: Contribution to journalArticle

  122. Published

    Crystal growth in deformed metals by an impingement and spheroidisation process

    Yau Tse, 19 Jan 2004, In : Acta Materialia. 52, 2, p. 387-393 7 p.

    Research output: Contribution to journalArticle

  123. Published

    Microstructure and mechanical behavior of Nb-(10,15)A1-20V alloys

    Huisheng Jiao, Tiesheng Rong & Ian Jones, 1 Jan 2004, In : Acta Materialia. 17, p. 575-583 9 p.

    Research output: Contribution to journalArticle

  124. 2003
  125. Published

    A Probabilistic Methodology for Fatigue Life Prediction

    Jiaming Luo & Paul Bowen, 16 Jul 2003, In : Acta Materialia. 51, 12, p. 3537-3550 14 p.

    Research output: Contribution to journalArticle

  126. Published

    Statistical Aspects of Fatigue Behaviour in a PM Ni-base Superalloy Udimet 720

    Jiaming Luo & Paul Bowen, 16 Jul 2003, In : Acta Materialia. 51, 12, p. 3521-3535 15 p.

    Research output: Contribution to journalArticle

  127. Published
  128. Published

    Interdiffusion of the platinum group metals in Nickel at elevated temperatures

    Roger Reed, 3 Apr 2003, In : Acta Materialia. 51, 10, p. 2905-2919 15 p.

    Research output: Contribution to journalArticle

  129. Published

    Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites

    Timothy Doel, Paul Bowen, 1 Feb 2003, In : Acta Materialia. 51, 4, p. 1045-1057 13 p.

    Research output: Contribution to journalArticle

  130. 2002
  131. Published

    The response of TiAl based alloys to one-dimensional shock loading

    Ian Jones, 1 Nov 2002, In : Acta Materialia. 50, 19, p. 4801-4811 11 p.

    Research output: Contribution to journalArticle

  132. Published

    Fatigue crack growth in a Ti beta 21s/SCS-6 composite

    Jun Liu & Paul Bowen, 9 Oct 2002, In : Acta Materialia. 50, 17, p. 4205-4218 14 p.

    Research output: Contribution to journalArticle

  133. Published
  134. 2001
  135. Published

    The precipitation of topologically close-packed phases in Rhenium-containing superalloys

    Roger Reed, 14 Nov 2001, In : Acta Materialia. 49, 19, p. 4113-4125 13 p.

    Research output: Contribution to journalArticle

  136. Published
  137. Published
  138. Published
  139. Published
  140. Published

    On misfit-compensating ledges/disconnections

    Malcolm Hall, 1 Jan 2001, In : Acta Materialia. 49, 17, p. 3487-3492 6 p.

    Research output: Contribution to journalArticle

  141. 1996
  142. Published

    The massive transformation in Ti-Al alloys: Mechanistic observations

    Xiao-Dong Zhang, Martin Strangwood, Michael Kaufman & Michael Loretto, 1 Jan 1996, In : Acta Materialia. 44, 9, p. 3723-3734 12 p.

    Research output: Contribution to journalArticlepeer-review