Acta Materialia, 1359-6454

Journal

1 - 50 out of 120Page size: 50

Publications

  1. 1996
  2. Published

    The massive transformation in Ti-Al alloys: Mechanistic observations

    Xiao-Dong Zhang, Martin Strangwood, Michael Kaufman & Michael Loretto, 1 Jan 1996, In: Acta Materialia. 44, 9, p. 3723-3734 12 p.

    Research output: Contribution to journal › Article › peer-review

  3. 2001
  4. Published

    On misfit-compensating ledges/disconnections

    Malcolm Hall, 1 Jan 2001, In: Acta Materialia. 49, 17, p. 3487-3492 6 p.

    Research output: Contribution to journal › Article

  5. Published

    Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition

    Cengiz Kaya, 19 Apr 2001, In: Acta Materialia. 49, p. 1189-1197 9 p.

    Research output: Contribution to journal › Article

  6. Published

    The Significance of acoustic emission during stressing of TiAl-based alloys. Part 1 Detection of Cracking During Loading up in Tension

    Richard Botten, Xinhua Wu, Dawei Hu & Michael Loretto, 13 Jun 2001, In: Acta Materialia. 49, 10, p. 1687-1691 5 p.

    Research output: Contribution to journal › Article

  7. Published

    The significance of acoustic emission during stressing of TiAl-based alloys Part 2 Influence of cracks induced by pre-stressing on the fatigue life

    Xinhua Wu, Dawei Hu & Michael Loretto, 13 Jun 2001, In: Acta Materialia. 49 (2001), p. 1693-1699 7 p.

    Research output: Contribution to journal › Article

  8. Published

    Effect of heat treatment and exposure on microstructure and mechanical properties of Ti-25V-15Cr-2Al-0.2C (wt%)

    Yue Li, Michael Loretto, 3 Sep 2001, In: Acta Materialia. 49, 5, p. 3011-3017 7 p.

    Research output: Contribution to journal › Article

  9. Published

    The precipitation of topologically close-packed phases in Rhenium-containing superalloys

    Roger Reed, 14 Nov 2001, In: Acta Materialia. 49, 19, p. 4113-4125 13 p.

    Research output: Contribution to journal › Article

  10. 2002
  11. Published

    The correlation of microstructural development and thermal stability of mechanically alloyed multicomponent Fe-Co-Ni-Zr-B alloys

    Isaac Chang, 12 Jun 2002, In: Acta Materialia. 50, 10, p. 2747-2760 14 p.

    Research output: Contribution to journal › Article

  12. Published

    Fatigue crack growth in a Ti beta 21s/SCS-6 composite

    Jun Liu & Paul Bowen, 9 Oct 2002, In: Acta Materialia. 50, 17, p. 4205-4218 14 p.

    Research output: Contribution to journal › Article

  13. Published

    The response of TiAl based alloys to one-dimensional shock loading

    Ian Jones, 1 Nov 2002, In: Acta Materialia. 50, 19, p. 4801-4811 11 p.

    Research output: Contribution to journal › Article

  14. 2003
  15. Published

    Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites

    Timothy Doel, Paul Bowen, 1 Feb 2003, In: Acta Materialia. 51, 4, p. 1045-1057 13 p.

    Research output: Contribution to journal › Article

  16. Published

    Interdiffusion of the platinum group metals in Nickel at elevated temperatures

    Roger Reed, 3 Apr 2003, In: Acta Materialia. 51, 10, p. 2905-2919 15 p.

    Research output: Contribution to journal › Article

  17. Published

    Direct evidence for Suzuki segregation and Cottrell pinning in MP159 superalloy obtained by FEG(S)TEM/EDX

    Ian Jones & Raymond Smallman, 9 Apr 2003, In: Acta Materialia. 51, p. 2731-2742 12 p.

    Research output: Contribution to journal › Article

  18. Published

    A Probabilistic Methodology for Fatigue Life Prediction

    Jiaming Luo & Paul Bowen, 16 Jul 2003, In: Acta Materialia. 51, 12, p. 3537-3550 14 p.

    Research output: Contribution to journal › Article

  19. Published

    Statistical Aspects of Fatigue Behaviour in a PM Ni-base Superalloy Udimet 720

    Jiaming Luo & Paul Bowen, 16 Jul 2003, In: Acta Materialia. 51, 12, p. 3521-3535 15 p.

    Research output: Contribution to journal › Article

  20. 2004
  21. Published

    Microstructure and mechanical behavior of Nb-(10,15)A1-20V alloys

    Huisheng Jiao, Tiesheng Rong & Ian Jones, 1 Jan 2004, In: Acta Materialia. 17, p. 575-583 9 p.

    Research output: Contribution to journal › Article

  22. Published

    Crystal growth in deformed metals by an impingement and spheroidisation process

    Yau Tse, 19 Jan 2004, In: Acta Materialia. 52, 2, p. 387-393 7 p.

    Research output: Contribution to journal › Article

  23. Published

    The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites

    Paul Bowen, 5 Apr 2004, In: Acta Materialia. 52, p. 1423 - 1438 16 p.

    Research output: Contribution to journal › Article

  24. Published

    Effects of defect geometry on fatigue crack growth behavior of cross-ply Ti-6Al-4V/SCS-6 metal matrix composites

    Paul Bowen, 17 May 2004, In: Acta Materialia. 52, 9, p. 2691-2700 10 p.

    Research output: Contribution to journal › Article

  25. 2005
  26. Published

    Diffusion rates of 3d transition metal solutes in Nickel by first principles calculations

    Roger Reed, 1 May 2005, In: Acta Materialia. 53, p. 2369-2376 8 p.

    Research output: Contribution to journal › Article

  27. 2006
  28. Published

    On the mechanism of formation of diffusional plate-shaped transformation products

    Malcolm Hall, 1 Mar 2006, In: Acta Materialia. 54, 5, p. 1227-1232 6 p.

    Research output: Contribution to journal › Article

  29. Published

    Creep properties of a Pt-Aluminide coating

    Mary Taylor, Hugh Evans, 1 Jul 2006, In: Acta Materialia. 54, 12, p. 3241-3252 12 p.

    Research output: Contribution to journal › Article

  30. Published

    Analytical electron microscopy of C-free and C-containing Ti-15-3

    Xinhua Wu, Qiang Li, Dawei Hu & Michael Loretto, 1 Dec 2006, In: Acta Materialia. 54, 20, p. 5433-5448 16 p.

    Research output: Contribution to journal › Article

  31. 2007
  32. Published

    A physics-based life prediction methodology for thermal barrier coating systems

    Hugh Evans, 1 Mar 2007, In: Acta Materialia. 55, 5, p. 1491-1503 13 p.

    Research output: Contribution to journal › Article

  33. Published

    The mechanical properties and the deformation microstructures of the C15 Laves phase Cr2Nb at high temperatures

    Ian Jones, 1 Apr 2007, In: Acta Materialia. 55, 6, p. 1873-1884 12 p.

    Research output: Contribution to journal › Article

  34. 2008
  35. Published

    A model for the creep deformation behaviour of single-crystal superalloy CMSX-4

    Roger Reed, 1 Jan 2008, In: Acta Materialia. 56, 8, p. 1657-1670 14 p.

    Research output: Contribution to journal › Article

  36. Published

    On the compatibility of single crystal superalloys with a thermal barrier coating system

    Roger Reed, 1 Jan 2008, In: Acta Materialia. 56, 3, p. 313-323 11 p.

    Research output: Contribution to journal › Article

  37. Published

    On the numerical simulation of diffusion-controlled reactions under local equilibrium conditions

    Roger Reed, 1 Jan 2008, In: Acta Materialia. 56, 15, p. 3754-3760 7 p.

    Research output: Contribution to journal › Article

  38. Published

    The retention of thermal barrier coating systems on single-crystal superalloys: Effects of substrate composition

    Roger Reed, 1 Jan 2008, In: Acta Materialia. 56, 14, p. 3622-3629 8 p.

    Research output: Contribution to journal › Article

  39. Published

    A critique of rhenium clustering in Ni-Re alloys using extended X-ray absorption spectroscopy

    Alessandro Mottura, 1 Jun 2008, In: Acta Materialia. 56, 11, p. 2669-2675 7 p.

    Research output: Contribution to journal › Article › peer-review

  40. Published

    Charge transfer driven surface segregation of gold atoms in 13-atom Au–Ag nanoalloys and its relevance to their structural, optical and electronic properties

    Roy Johnston, 1 Jun 2008, In: Acta Materialia. 56, 10, p. 2374-2380 7 p.

    Research output: Contribution to journal › Article

  41. Published

    Mechanism of competitive grain growth in directional solidification of a nickel-base superalloy

    Yizhou Zhou & Nick Green, 1 Jun 2008, In: Acta Materialia. 56, 11, p. 2631-2637 7 p.

    Research output: Contribution to journal › Article

  42. 2009
  43. Published

    Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ

    Timothy Doel, Paul Bowen, 1 Jan 2009, In: Acta Materialia. 57, 2, p. 590-599 10 p.

    Research output: Contribution to journal › Article

  44. Published

    Characterization of microplasticity in TiAl-based alloys

    Dawei Hu, Xinhua Wu, Michael Loretto, 1 Mar 2009, In: Acta Materialia. 57, 5, p. 1357-1366 10 p.

    Research output: Contribution to journal › Article

  45. Published

    Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy

    Roger Reed, 1 Apr 2009, In: Acta Materialia. 57, 7, p. 2266-2276 11 p.

    Research output: Contribution to journal › Article

  46. Published

    The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systems

    Mary Taylor & Hugh Evans, 1 May 2009, In: Acta Materialia. 57, 8, p. 2349-2361 13 p.

    Research output: Contribution to journal › Article

  47. Published

    Fabrication of free standing 316-L stainless steel-Al2O3 composite micro machine parts by soft moulding

    Kyle Jiang, 1 Sep 2009, In: Acta Materialia. 57, 16, p. 4751-4757 7 p.

    Research output: Contribution to journal › Article

  48. Published

    Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds

    Moataz Attallah, 1 Oct 2009, In: Acta Materialia. 57, 18, p. 5582-5592

    Research output: Contribution to journal › Article › peer-review

  49. Published

    Alloys-By-Design: Application to nickel-based single crystal superalloys

    Roger Reed & Nils Warnken, 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5898-5913 16 p.

    Research output: Contribution to journal › Article

  50. Published

    Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys

    Nils Warnken, Roger Reed, 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5862-5875 14 p.

    Research output: Contribution to journal › Article

  51. 2010
  52. Published

    Atom probe tomography analysis of the distribution of rhenium in nickel alloys

    Alessandro Mottura, Nils Warnken, 1 Feb 2010, In: Acta Materialia. 58, 3, p. 931-942 12 p.

    Research output: Contribution to journal › Article › peer-review

  53. Published

    Effects of breakaway oxidation on local stresses in thermal barrier coatings

    Hugh Evans & Mary Taylor, 1 Feb 2010, In: Acta Materialia. 58, 4, p. 1242-1251 10 p.

    Research output: Contribution to journal › Article

  54. Published

    Coarsening of a multimodal nickel-base superalloy

    Hector Basoalto, 1 Jun 2010, In: Acta Materialia. 58, 11, p. 4019-4028

    Research output: Contribution to journal › Article › peer-review

  55. 2011
  56. Published

    Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications

    Atsushi Sato & Roger Reed, 1 Jan 2011, In: Acta Materialia. 59, 1, p. 225-240 16 p.

    Research output: Contribution to journal › Article › peer-review

  57. Published

    Creep and creep modelling of a multimodal nickel-base superalloy

    Hector Basoalto, 1 Feb 2011, In: Acta Materialia. 59, 3, p. 854-863

    Research output: Contribution to journal › Article › peer-review

  58. Published

    Linear friction welding of Ti-6Al-4V: Modelling and validation

    Richard Turner, Jean-Christophe Gebelin, Mark Ward & Roger Reed, 1 Jun 2011, In: Acta Materialia. 59, 10, p. 3792-3803 12 p.

    Research output: Contribution to journal › Article

  59. Published

    Effect of tensile stress on the formation of S-phase during low-temperature plasma carburizing of 316L foil

    Xiaoying Li & Hanshan Dong, 1 Aug 2011, In: Acta Materialia. 59, 14, p. 5765-5774 10 p.

    Research output: Contribution to journal › Article

  60. 2012
  61. Published

    On the mechanism of porosity formation during welding of titanium alloys

    Jianglin Huang, Nils Warnken, Jean-Christophe Gebelin, Martin Strangwood & Roger Reed, 1 Apr 2012, In: Acta Materialia. 60, 6-7, p. 3215-3225

    Research output: Contribution to journal › Article › peer-review

  62. Published

    On the possibility of rhenium clustering in nickel-based superalloys

    Alessandro Mottura & Roger Reed, 1 Apr 2012, In: Acta Materialia. 60, 6-7, p. 2866-2872 7 p.

    Research output: Contribution to journal › Article › peer-review

  63. Published

    A model for the creep deformation behaviour of nickel-based single crystal superalloys

    Nils Warnken & Roger Reed, 1 Jul 2012, In: Acta Materialia. 60, 12, p. 4888-4900

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 3 Next