Wire fin heat exchanger using aluminium fumarate for adsorption heat pumps

Majdi Saleh, Raya Al-Dadah, Saad Mahmoud Mahmoud, Eman Hussein, Osama El-Samni

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)

Abstract

Adsorption heat pumps have faced major challenges in terms of their large size and capital cost caused by using conventional heat exchangers for adsorption beds and the poor performance of the currently used adsorbent materials such as silica gel and zeolite. This work experimentally and numerically investigates the performance of a wire finned heat exchanger compared to rectangular finned and microchannel heat exchangers. The microchannel heat exchanger experienced significantly high pressure drop almost 5 times that of the wire and rectangular finned heat exchangers. The two heat exchangers were packed with aluminium fumarate metal-organic framework (MOF) material where the finned wire heat exchanger had a superior performance. Then the performance of the wire finned heat exchanger packed with aluminium fumarate was investigated in terms of water uptake and surface temperature at various fin height (3.5, 7 and 14 mm), spacing (1, 2 and 3.5 mm) and tube diameter (6, 9 and 12 mm). The numerical model was validated using experimental work showing good agreement with deviation ranging from ±10.
Original languageEnglish
Article number114426
Number of pages11
JournalApplied Thermal Engineering
Volume164
Early online date23 Sep 2019
DOIs
Publication statusPublished - 5 Jan 2020

Keywords

  • Adsorption process
  • Aluminium Fumarate/water
  • CFD model
  • COMSOL Multiphysics
  • Heat Pump
  • Wire finned heat exchanger
  • Heat pump
  • Aluminium fumarate/Water

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'Wire fin heat exchanger using aluminium fumarate for adsorption heat pumps'. Together they form a unique fingerprint.

Cite this