Tunable millimetre-wave phase shifting surfaces using piezoelectric actuators

Marina Mavridou, Alexandros Feresidis, Peter Gardner, Peter Hall

Research output: Contribution to journalArticlepeer-review

6 Citations (Scopus)
304 Downloads (Pure)


A novel technique for tuning periodic phase shifting surfaces at millimetre-waves is presented. The proposed structure consists of a periodic surface placed over a ground plane creating an air cavity. The periodic surface is formed by a two-dimensional array of metallic square loop elements printed on a 0.8 mm thick dielectric substrate. When excited by a plane wave, the structure is acting as an artificial impedance surface, reflecting the incident wave with a wide range of phase values within a specific frequency band. The tuning is achieved by means of a small number of piezoelectric actuators which support the periodic surface. The actuators are placed around the periodic surfaces thereby not interfering with the radiation performance and introducing no losses. They produce a displacement between the periodic surface and the ground plane when voltage is applied, which in turn changes the reflection phase response of the structure. Full wave periodic simulations have been carried out in three-dimensional electromagnetic simulation software (CST Microwave StudioTM) to extract the reflection characteristics and evaluate the expected tuning range of the proposed structure. A prototype has been fabricated and measured validating the concept. View full abstract»
Original languageEnglish
Pages (from-to)829-834
Number of pages6
JournalMicrowaves, Antennas & Propagation
Issue number11
Publication statusPublished - 19 Aug 2014


Dive into the research topics of 'Tunable millimetre-wave phase shifting surfaces using piezoelectric actuators'. Together they form a unique fingerprint.

Cite this