Abstract
Surface Evolver software was used to create the three-dimensional geometry of a Kelvin open-cell foam, to simulate that of polyurethane flexible foams. Finite Element Analysis (FEA) with 3D elements was used to model large compressive deformation in the [001] and [111] directions, using cyclic boundary conditions when necessary, treating the polyurethane as an elastic or elastic-plastic material. The predicted foam Young's moduli in the [001] direction are double those of foams with uniform Plateau border cross-section edges, for the same foam density and material properties. For compression in the [111] direction, the normalized Young's modulus increases from 0.9 to 1.1 with foam relative density, and the predicted stress-strain relationship can have a plateau, even for a linearly-elastic polymer. As the foam density increases, the predicted effects of material plasticity become larger. For foam of relative density 0.028, edge-to-edge contact is predicted to occur at a 66% strain for [111] direction compression. The foam is predicted to contract laterally when the [111] direction compressive strain exceeds 25%. (c) 2006 Elsevier Ltd. All rights reserved.
Original language | English |
---|---|
Pages (from-to) | 51-65 |
Number of pages | 15 |
Journal | International Journal of Solids and Structures |
Volume | 44 |
Issue number | 1 |
DOIs | |
Publication status | Published - 1 Jan 2007 |